• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.41-44
• /
• 2008

In this paper, the gas generator using hydrogen peroxide catalytic decomposition was designed for turbine generator operation. The gas generator used 90wt% rocket-grade of hydrogen peroxide and manganese dioxide as a catalyst. Turbine generators utilizing gas generators were investigated and the prestudy was prepared using automobile turbocharger instead of turbine generator.

• Horticultural Science & Technology
• /
• v.17 no.3
• /
• pp.325-328
• /
• 1999

This experiment was conducted to investigate the effect of the automatic control of night temperature and day length on the flower bud initiation growth responses and yield of strawberries. Flower bud initiation was observed only 14 days after treatment in plants forced with automatic system but not in plants forced with traditional methods, and flower bud development was further progressed by an automatic system. In genernal, the crown diameter of runner plants derived from strawberries grown with the automatic system was smaller than those from the plants grown under hand-operated system and this tendency was clear in plants placed at middle and low position during forcing. The rate of transpiration was higher in plants treated with hand operated method but the content of chlorophyll was lower than those treated with the automatic system. Results indicated that automatic system has an advantage in stimulation of flower bud initiation and improving the quility of runner plants.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1101-1106
• /
• 2016

In this thesis, I developed a ball press pushing up equipment to solve the defect that occurs when the ball is inserted to the auto transmission. The ball press pushing up equipment is composed of heating device, thermostat which controls the heating device and the automated insertion device which helps to enhance mass production. This development contributes to quality improvement of domestic automobile production auto transmission part, and also contribute to cost reduction and sales increase for corporations.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.172-176
• /
• 2005

Environmentally friendly water dispersion polyurethanes containing fluorine were prepared with a fluorinated polyol having $62\%$ of fluorine $(Fluorolink^{(R)}\;M_n\;1000)$. In order to control the fluorine contents of the synthesized polyurethanes polytetramethylene glycol (PTMG2000) and $Fluorolink^{(R)}$ were mixed at assigned ratios and reacted with isophorone diisocyanate (IPDI) as a diisocyanate used. Introducing hydrophilic anion to the polymer chain was achieved by applying dimethyl propionic acid (DMPA). The ionic groups were neutralized with triethyl amine (TEA) before dispersion into water. Chain extension was executed by adding ethylene diamine at the final stage. Mechanical properties of the polymers showed that modulus increased with increasing $Fluorolink^{(R)}$ content. Surface energy values obtained from contact angle measurement decreased with increasing $Fluorolink^{(R)}$ content up to $20\%$. We expect that the synthesized polyurethanes present reliable effect from the fluorine atoms incorporated even at a small amount of $Fluorolink^{(R)}$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.9
• /
• pp.829-836
• /
• 2013

The combustion characteristics with variations in synthetic natural gas (SNG) compositions were studied in a lab-scale combustor. The objective of the current study is to investigate the flame stabilization, flame structure, and spectrometry in a non-premixed SNG flame with varying fuel compositions. For the analysis of light emission in SNG flames, we used a spectrometer. As experimental conditions, the fuel jet velocity at the nozzle exit $u_F$ was varied from 5 to 40 m/s and the coaxial air velocity $u_A$ was varies from 0 to 0.43 m/s. The experiments showed that the flame stability increased with the hydrogen component in SNG.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.95-100
• /
• 2017

In this study, various Pigment Red 57:1 samples and also their dispersant were prepared in various synthesis conditions via changing parameters such as synthesis time, pH, derivative content and synthesis temperature in order to analyze the pigment particle behaviors and their spectroscopic and physical properties. Each sample was analyzed using Fourier infrared spectroscopy, UV-Vis spectroscopy, particle size analyzer, color spectrophotometer and X-ray diffractometer and their characteristics were compared. As a result, it was possible to control the size of pigment particles by controlling the synthesis conditions.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.352-357
• /
• 2019

In this study, we investigated the limit temperature range which is effective for dormancy release of 'Hongro' and 'Fuji' apples during the endodormancy period. The germination rate was 50% or more in all treatments except of 'Hongro' $-5^{\circ}C$ treatment. The germination rate of 'Fuji' was 86.3% at the temperature of $-5^{\circ}C$. The concentrations of carbohydrate and mineral components were significantly different between treatments but did not show any tendency or specific change. However, the sorbitol contents of 'Hongro' $-5^{\circ}C$ treatment were higher at 29.62 mg/g than those of 'Fuji', which was not affected for dormancy release. The results of hormone analysis showed that ABA(abscisic acid) and JA(jasmonic acid) in 'Hongro' $-5^{\circ}C$ treatment were respectively 176.48 and 15.72 ng/g. ABA, JA and SA(salicylic acid) contents in 'Fuji' apple tree were significantly lower than those of 'Hongro'. As a result of this study, the limit temperature range effective for dormancy release was different according to the varieties, and 'Hongro' did not affect with 30.3% of germination rate at $-5^{\circ}C$. However, 'Fuji' is 86.3% even at $-5^{\circ}C$ it was suggested that 'Fuji' had a chilling accumulation for dormancy release.

• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.184-192
• /
• 2016

This study was carried out to investigate the effect of temperature ($15{\sim}40^{\circ}C$) and the spraying plant growth regulators ($GA_{4+7}+BA$ and prohexadione-calcium) during full blooming on pollen germination and pollen tube growth of the commercial apple cultivars ('Fuji' and 'Tsugaru') and apple cultivars bred in Korea ('Chukwang', 'Gamhong', 'Hongan', 'Honggeum', 'Hongro', 'Hwahong', 'Hongso', 'Summer dream' and 'Sunhong'). Pollen germination and pollen tube growth were increased with increasing temperature from 15 to $25^{\circ}C$, but high temperature over $30^{\circ}C$ inhibit those. The apple cultivar bred in Korea that shows the highest value on pollen germination and pollen tube growth at over $30^{\circ}C$ was 'Sunhong'. The spraying $GA_{4+7}+BA$ increased pollen germination and pollen tube growth than control, but that effect was not show at $40^{\circ}C$. The spraying prohexadione-calcium was not affect to pollen germination and pollen tube growth. In conclusion, if the air temperature during full bloom of apple tree rises about $30{\sim}35^{\circ}C$, the spraying $GA_{4+7}+BA$ after artificial pollination will be good to increasing fruit set.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.4
• /
• pp.79-89
• /
• 2003

The purpose of this study is to investigate appropriate environmental factors when domestic waste is decomposed as aerobic digestion. So stabilization degree was measured after the waste is mixed as certain rates and water content was controlled by 55% and 60%. Variation of VS showed food waste in reactors of number 1, 2, 3, 4 and 5 was decomposed fully except reactor of number 6. Decomposition degree of VS in reactors of number 1, 2, 3 and 4 was not different high because Vinyl and plastic inserted played role bulking agent in reactor number 1, 2, 3 and 4. In reactors, maximum temperature indicated $57{\sim}59^{\circ}C$ and temperatures in reactors 1, 2, 3 and 4 were higher and remained longer than in reactor 5 and 6 for 2~4 days. Variation of $CO_2$ was similar to that of VS. The reduction rate of water content was low because moisture generated by oxidation fever of microorganism did not evaporated well. pH was low in the beginning of the reaction however, as time passed, it increased slightly and remained regular pattern. EC and C/N showed the same pattern as pH. Settlement and weight reduction rates were similar to the factors above. Reactor 1, 2, 3, and 4 showed higher settlement and weight reduction rate than reactor 5 and 6.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.39-39
• /
• 2007

원자층 증착(Atomic Layer Deposition: ALD) 방법은 반응물질들을 펄스형태로 챔버에 공급하여 기판표면에 반응물질의 표면 포화반응에 의한 화학적 흡착과 탈착을 이용한 박막증착기술이다. ALD법은 기존의 화학적 기상증착(Chemical Vapor Deposition: CVD)과 달리 자기 제한적 반응(self-limiting reaction) 에 의하여 반응가스가 기판 표면에서만 반응하고 가스와 가스 간에는 반응하지 않는다. 따라서 박막의 조성 정밀제어가 쉽고, 파티클 발생이 없으며, 대면적의 박막 증착시 균일성이 우수하고, 박막 두께의 정밀 조절이 용이한 장점이 있다. 이러한 ALD 방식으로 3차원의 반도체 장치 구조물에 산화막 등을 형성하는 공정에서 중요한 요소 중의 하나는 전구체의 충분한 공급이다. 따라서 증기압이 높은 전구체를 선호하는 경향이 있다. 그러나 증기압이 낮은 전구체를 사용할 경우, 공급량이 부족하여 단차 도포성(step coverage)이 떨어지는 문제가 있다. 원자층 증착 공정에서 전구체를 충분히 공급하기 위해전구체 온도를 증가시키거나 전구체의 공급시간을 늘리는 방법을 사용한다. 그러나 전구체 온도를 상승시키는 경우, 전구체의 변질이나 수명을 단축시키는 문제점을 발생시킬 수 있으며. 전구체를 충분히 공급하기 위하여 전구체의 공급시간을 늘이는 방법을 사용하면, 원하는 박막을 형성하기 위하여 소요되는 공정시간과 전구체 사용량이 증가된다. 본 논문에서는 이러한 문제점을 해결하기 위해 반응기 안에서 전구체 노출 시간을 조절하는 새로운 ALD 공정을 소개한다. 특히 이러한 기술을 적용하면 나노튜브를 성장시키는데 매우 유리하다. 본 연구에서 전구체 노출 시간을 조절하기 위하여 사용된 ALD 장비는 Lucida-D200-PL (NCD Technology사)이며 (TEMA)Zr와 H2O를 사용하여 ZrO2 나노튜브를 폴리카보네이트 위에 성장시켰다. 전구체의 노출 시간은 반응기의 Stop 밸브를 이용하여 조절하였으며, SEM, TEM 등을 이용하여 나노튜브의 균일성과 단차피복성 등의 특성을 관찰하였다. 그 결과 전구체 노출시간을 조절함으로써 높은 종횡비를 갖는 나노튜브를 성장 시킬 수 있음을 확인하였다. 또한 낮은 증기압을 가지는 전구체를 이용하여도 우수한 특성의 나노튜브를 균일하게 성장시킬 수 있었다.