• Journal of the Korean Magnetics Society
• /
• v.3 no.4
• /
• pp.320-324
• /
• 1993

The effect of sputtering conditions on magnetic properties of CoCrMo/Cr magnetic thin film was investigated. Substrate temperature were controlled from R. T to $250^{\circ}C$. The thickness changes of Cr underlayer and CoCrMo magnetic layer were in the range of $1000-2500\AA$ and $300-800\AA$, respectively. Grain size was found to be decreased with increasing magnetic layer thickness(from $500\AA$ to $800\AA$). CoCrMo magnetic layer microstructure showed relatively small dependence on Cr underlayer thickness, substrate temperature. Coercivity increased with increasing Cr underlayer, magnetic layer thickness and substrate temperature. CoCrMo/Cr thin film showed a coercivity of 880 Oe in $700\AA$ magnetic layer thickness and $1000\AA$ Cr underalyer thickness.

• Korean Journal of Ecology and Environment
• /
• v.34 no.1 s.93
• /
• pp.9-19
• /
• 2001

contrasting monsoon between 1993 and 1994 produced an interannual difference in hydrology. Theoretical water residence time (TWRT) in monsoon 1993 averaged 27 d, which was>3 months shorter compared to the TWRT in monsoon 1994. A dominant physical process influencing thermal stratification, water movement, and mixing regime was an interflow current in 1993. During summer 1993, river water plunged to mid-lake (location 27 km) and passed through the 10${\sim}$20m stratum of the reservoir, resulting in an isolation of epilimnetic lake water from advected river water. The interflow disrupted thermal stratification and produced a meta-hypolimnetic warming of >4$^{\circ}C$ downlake, thereby increased a mixing depth (>13 m). In contrast, during monsoon 1994 density currents were not observed and strong thermal stratification occurred in the entire reservoir, resulting in > 2 fold greater thermal resistance (8.2${\times}10^{5}$ erg)compared to 1993 (4.0${\times}10^{5}$ erg). This reservoir was identified as a typical warm monomictic reservoir which showed one mixis during early winter. The timing of overturn, however, differed between the two years as a result of distinct contrast in TWRT and thermal regime; overturn in 1993 occured about one month earlier relative to that in 1994. Hypolimnetic warming was predictable in this system; the variation in discharge accounted (Y = 4.35-0.06X+0.10X$^{2}$, p<0.0001)for 98% of the interannual variation in hypolimnetic temperature. Overall data suggest that thermal stability, the timing of fall overturn, and water residence time in this system are primarily regulated by the intensity of monsoon.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.1
• /
• pp.73-79
• /
• 2010

Propellant tank pressurizing gas injector is used in the pressurization system of liquid propellant rocket to reduce incoming gas velocity and distribute the gas in the tank. Temperature distribution in the propellant tank ullage is varied according to the gas injector shape, and it has influence on the required pressurant gas and thermal phenomena in the tank. In this paper, diffuser type gas injector was studied to make the ullage have stratified temperature distribution. Injected gas flow at the outlet of prototype diffuser was visulized using particle image velocimetry method and it was compared with the results of calculation. Calculation was well agreed with measurement and was used as an inlet condition of propellant tank ullage calculation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.3
• /
• pp.25-37
• /
• 2005

For pump-fed rocket propulsion system, the temperature of LOX to be supplied to turbopump inlet should be satisfied with pump inlet temperature requirement during all operating stages, as excessive temperatures can result in cavitation due to reduction in NPSH, thus either damaging the pump or adversely affecting pump performance rise. So exact estimation of LOX temperature rise is absolutely needed for developing reliable propulsion system. This paper presents systematic analysis scheme for estimating inner process of cryogenic propellant tank which is needed for LOX temperature rise. And this paper presents LOX temperature rise and thermal stratification for all rocket operating stages including cooling, filling, waiting, pre-pressurization and firing, with the application of buoyancy driven boundary layer theory.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.51-54
• /
• 2003

지금까지 통상적으로 사용하고 있는 Plasma Lighting System(이하 PLS)의 마그네트론 구동용 고전압, 고전류 전원장치는 성층 철심 HVT를 이용한 방식을 적용하고 있다. 이 방식은 상용 주파수를 사용하므로, 승압트랜스포머나 배 전압용의 커패시터를 대형으로 하기 때문에 고중량, 저효율 및 출력의 한계성과 광출력에서 플리커현상 둥의 단점을 지닌다. 이의 해결책으로 최근 인버터 방식의 전원장치를 PLS에 적용 하고자 하는 연구가 활발하게 진행되고 있다. 설계한 PLS 마그네트론 구동을 위한 고전압, 고전류 전원장치는 기존의 스위칭 기술을 이용 낮은 스위칭 손실의 고속 스위칭을 통한 시스템의 소형, 경량화 및 고전력밀도를 가지도록 하였고 $\mu$-com을 이용하여 Micro-wave의 누설에 따른 사고를 방지하기 위하여 광 검출과 마그네트론 온도 검출 등의 시스템 보호 기능을 가지고 있으며, 고전압 출력을 고저 항으로 분압하고 PWM 제어기에 피드백하여 매우 안정된 출력 전압이 얻어지도록 하였다. 또한 출력 전류를 제한 할 수 있게 하여 광량 조절이 가능하도록 하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.422-422
• /
• 2019

최근 낙동강유역에서는 여름철 폭염 및 가뭄의 영향으로 조류대경보가 발령되고 있으며, 급격한 수질환경적 변화가 이루어지고 있다. 녹조중의 하나인 남조류가 만들어내는 마이크로시스틴은 직접 섭취하면 간 괴사까지 일으키는 독성물질로 알려져 있으며, 최근 4대강 녹조 발생 지역에 살고있는 어패류의 체내에 마이크로시스틴이 축적돼 이를 섭취하기만 해도 이차 독성이 나타나는 것으로 확인되었다. 특히 낙동강은 가뭄과 같은 기상학적 영향에 따른 수질환경적 변동특성이 뚜렷하여 수생태에 미치는 피해우려가 크며, 녹조발생에 취약한 유역이라 할 수 있다. 이는 기후변화에 따른 강우의 강도 및 편중으로 영양물질 유출의 증가와 표층 온도 상승과 함께 밀도류에 의해 성층이 심화되면서 표층에서의 극심한 녹조 발생이 이루어지는 것으로 설명할 수 있다. 따라서 본 연구에서는 연구대상지점으로 낙동강유역을 선정하여 물환경 빅데이터 구축을 통해 상세 유역현황을 파악하고 데이터마이닝 기법을 이용하여 녹조발생에 따른 수질환경적 변동특성 및 영향인자를 분석하고자 한다. 또한 가뭄에 따른 수질환경적 취약지역에 대한 선제적 관리방안을 도출하기 위해 지점별 취약성 평가방안을 제시하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1385-1394
• /
• 1994

A three-dimensional numerical model of surface buoyant jets with variable density was established. The model uses fully nonlinear, time-dependent, three-dimensional, ${\sigma}$-transformed equations of motion and equation of heat transport. A semi-implicit numerical scheme in time has been adopted for computational efficiency. The model was applied for thermal jets discharging into a stagnant water and the simulated results were compared with a hydraulic experimental data set showing good agreement. Comparative studies of exchange coefficients and stability functions indicated that spatial variation of exchange coefficients should be considered and the existing stability functions should be modified to simulate surface buoyant jets accurately.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.3
• /
• pp.248-256
• /
• 1995

The numerical study on the surface buoyant jets has remained of requiring more intensive investigation for problems due to the treatments of free surface, Reynolds stress/flux terms in turbulent flow and especially buoyancy effects on the turbulent fluctuation. etc. The verification of predicted results from the numerical study continues in the qualitative study. because of the lack of experimental data, which seems to be due to the difficulties in measuring the turbulent fluctuations in concentration or temperature fields. In this study, the computer program of Algebraic Stress Model has been developed to investigate the behaviours of two-dimensional surface buoyant jets with free surface boundary condition. The computational results are compared with published experimental data. By comparing these results with experimental data. it is found that this model can predict fairly well the flow characteristics of two-dimensional surface buoyant jets in the momentum-dominant region and buovancy-dominant region. Especially, it is proved that this model can predict the flow characteristics reasonably in buoyancy-dominant region stably stratified due to buoyancy effect.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.141-146
• /
• 2008

For the efficient use of thermal energy and its related equipments, optimal energy in view of quality and quantity should be timely provided. The core of thermal energy storage technology deals with an energy efficiency for effective energy storage and supply. The relative importance of thermal energy storage technology has been underestimated so far, and the specific projects on this filed have been performed intermittently. For the efficient and systematic approach of the energy supply system projects on thermal energy storage technology, we conduct the survey on the current status of this field. Firstly, classify into the thermal energy storage and describing the recent research for each system. The necessity and importance of thermal energy storage technology is identified through this study. It reveals that the thermal energy storage is the mandatory technology to solve the difference of supply and demand in thermal loads. It would greatly contribute to the combined heat and power(CHP) system. The urgent technologies for the commercial value and the core technologies for the CHP system are classified with this study.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1288-1293
• /
• 2009

The TES (Thermal Energy Storage) cooling system utilizing cheaper off-peak electricity has been applied just for building air-conditioning currently and causes limitation of usage rate and inefficiency of national resources utilization. In this regard, more says the necessity to apply TES system in industrial cooling system which is longer using period and wider usage. In this study, we will approve the technical and economical improvement in efficiency of industrial cooling system applied TES system by utilizing cheaper off-peak electricity and it will attribute the promotion of TES system and stabilization of supply and demand of electric power by proving the necessity to develop more efficient industrial cooling system by combining TES system.