• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.34-34
• /
• 1999

토카막(Tokamak)에서는 플라즈마(plasma)로 불순불(impurity)의 유입을 방지하기 위해 고진공을 유지해야 하며 이를 위해 가열탈리(backing), 방전세정(discharge codanning) 등 wall conditioning이 기본적으로 요구된다. KT-1 토카막은 실험실 이전에 따른 해체로 인해 진공용기(vacuum vessel) 가 대기압 하에 수개월 동안 노출되어 있었기 때문에 재조립 후 가열 탈 리가 필수적이나 진공용기의 외부에 saddle loop coil을 비롯해 Rogowski, diamagnetic coil, poloidal field coil 등 많은 magnetic pick up coil 들이 설치되어 있어 열선 등 일반적인 방법으로 가열 탈 리가 어려운 상황이다. 따라서 KT-1 토카막에서는 전자석 코일에 상전원을 부가하였을 때 진공용기에 발생하는 유도가열 (inductive heatin)을 이용해 가열 탈리를 시도하였다. 유도 가열 탈리(inductive backing)는 토로이달 자장 코일(toroidal field coil)과 가열 저장 모일(ohmic heating coil)을 각각 이용하여 코일의 온도가 6$0^{\circ}C$ 이하가 유지되는 코일 전류 범위내에서 수행하였으며 먼저 이 둥 경우에 있어서 진공용기의 온도분포를 비교하엿다. 그리고 가열 탈리 기간 및 그 전, 후의 진공압력과 잔류기체 분압을 측정, 분석하였다. 유도가열에 의한 방법으로 KT-1 토카막에서 얻은 탈리온도는 12$0^{\circ}C$정도로 비교적 낮았으나 탈리 시간을 연장하여 탈리효과를 어느 정도 보상할 수 있으며 일반적인 가열 탈리가 여려운 경우 유도 가열 탈 리가 채택될 수 있는 또 하나의 방법이라 볼 수 있다.

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.571-575
• /
• 2002

An immersion-type on-line refractometer useful for the in-situ measurement of salinity and temperature of sea water is developed, and its performance is examined by applying the refractometer to known salt solution having salt concentration between 2 and 4 % similar to practical sea water salinity. Since refractive index and temperature are measured simultaneously, it is possible to compensate the effect of temperature for fast and direct measurement. The outcome of salinity measurement for the different concentrations of salt solution indicates that the device is suitable for the salinity measurement by yielding stable and reproducible reading.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.977-985
• /
• 2020

KOMPSAT-3A launched in 2015 provides Middle InfraRed(MIR) images with 3.3~5.2㎛. Though the satellite provide high resolution images for estimating bright temperature of ground objects, it is different from existing satellites developed for natural science purposes. An atmospheric compensation process is essential in order to estimate the surface brightness temperature from a single channel MIR image of KOMPSAT-3A. However, even after the atmospheric compensation process, there is a brightness temperature error due to various factors. In this paper, we analyzed the cause of the brightness temperature estimation error by tracking signal flow from camera physical characteristics to image processing. Also, we study on possibility of improvement of MIR brightness temperature bias error of KOMPSAT-3A using GEOKOMPSAT-2A. After bias compensation of a real nighttime image with a large bias error, it was confirmed that the surface brightness temperature of KOMPSAT-3A and GEOKOMPSAT-2A have correlation. We expect that the GEOKOMPSAT-2A images will be helpful to improve MIR brightness temperature bias error of KOMPSAT-3A.

• Journal of Ginseng Research
• /
• v.12 no.1
• /
• pp.11-29
• /
• 1988

This study was conducted to investigate the effect of light intensity and temperature on the photosynthesis and respiration of ginseng plant. Highly significant, second degree curvilinear regressions were recognized among the photosynthesis of ginseng leaves, light intensity and temperature. And an interaction between the effects of light intensity and temperature on the photosynthesis of ginseng leaves was found to be highly significant. The increasing rate of photosynthesis with the increase of light intensity was markedly decreased with increasing temperature. The light compensation point of ginseng leaves was significantly varied with temperature, and the average point was approximately 600 lux. The light saturation point of Korean ginseng was 11,000 lux at $15^{\circ}C$ and $20^{\circ}C$ and around 9,500 lux at above $25^{\circ}C$. The decreasing rate of photosynthesis with the increase of temperature significantly increased with increasing light intensity. The optimum temperature for the photosynthesis of ginseng leaves was about 15 to $22^{\circ}C$ and markedly decreased with increasing light intensity. The highest photosynthesis occurred in ginseng leaves grown with the shade of 15% transmittance. The respiration of ginseng leaves increased with the shade of 5% and/or 30% transmittance. High temperature stimulated the respiration of ginseng leaves. Percent respiration to photosynthesis of ginseng leaves grown with the shade was increased at high temperature and decreased with increasing light Intensity. It was also increased with increasing transmittance. The maximum $CO_2$ absorption of ginseng leaves grown with the shade of 5Ps and ISVS transmittance accurred at 9 o'clock a.m., whereas that of 20% transmittance occurred at 7-9 o'clock a.m. The duration of $CO_2$ absorption was distinctively long with the shade of high transmittance. The $CO_2$ compensation point in the photosynthesis of ginseng leaves was 130 ppm.

• The Korean Journal of Rheology
• /
• v.8 no.3_4
• /
• pp.207-214
• /
• 1996

사출성형은 많은 장점과 유용성에도 불구하고 싱크마크나 휨과 같은 변형문제를 피 하기 어렵다. 이것은 성형품의 부위별 온도분포 및 냉각속도 차이에 의한 잔류응력에 기인 하는 것으로 구조가 복잡하거나 크기가 쿤 경우에 더욱 더 문제가 되기 쉽다. 이와 같은 문 제를 해결하기 위하여 성형품의 내부에 기포를 형성시켜 수지의 수축분을 기포의 성장으로 보상하여 주는 가스사출성형이 개발되어 많이 활용되고 있는 실정이다. 한편 일반 가스성형 과 달리 수지를 완전히 채운후 저압의 공기를 이용하여 기포를 발생시켜 수지의 체적수축분 을 보상해주는 PFP성형기술은 가스사출의 나점인 공기의 유동조절문제를 해결하고 비용이 저렴한 등의 잇점을 가지고 있다. 이 과정은 가스성형공정의 2차 침투과정과 매우 유사하나 아직까지 이에대한 이해나 연구는 매우 부족한 실정이다 본 연구는 기포의 성장이 수지의 체적수축에 의한 것이라는 가정에 근거하여 기포성장길이에 관한 모델링을 수행한 것이다. 실험결과와의 비교를 통하여 기본 가정에 대한 타당성을 검증하고 여러 인자들의 영향을 살 펴보았다. 본 연구는 PFP성형공정에 대한 이해를 증진시켜 금형설계 및 성형조건 설정에 대한 가이드라인을 제시하며 아울러 PFP공정에 대한 보다 체계적인 이해 및 일반가스성형 의 2차 침투과정 등의 관련 현상에 대한 이해 및 연구에 도움이 될것으로 기대된다.

• Fire Science and Engineering
• /
• v.20 no.1 s.61
• /
• pp.77-82
• /
• 2006

This study defined engineering mechanism and compensation method to establish reference pressure of smoke control zone with atmospheric pressure that is compensated for temperature. The reliable controller of integration smoke control was developed by establishing the specifications, algorithms and constructing engineering data. The development of controller for integration smoke control can cut down number of processes, manufacturing and installation cost by removing pressure measurement pipe established separately for non smoke control zone, and improve the accuracy of pressure differential by embedding pressure measurement ports for non smoke control zone. More correct and reliable pressure differentials can be obtained by the central control from controller of integration smoke control rather than the existent individual control. This will provide the basics and the flexibility to the integral smoke control system and accordingly improve the performance of disaster prevention.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.514-520
• /
• 2002

In this paper, the study of a design and fabrication of the receiver MMIC mixer for L-band application is described. The mixer is composed of active LO and RF balun to integrate on a chip and applied a newly proposed bias circuit to compensate the process variations of active devices. The conversion gain of the mixer is -14 dB, IIP3 is approximately 4 dBm and port-to-port isolation is over 25 dB. The newly proposed bias circuit is composed of a few FETs and resistors, and can compensate the variation of the threshold voltage by the process variations, temperature changes and etc. The designed chip size is $1.4\;mm{\times}1.4\;mm$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.47-52
• /
• 2012

A power amplifier is one of important factors for basestation's efficiency and the researches for efficency enhancement focus Doherty amplifier structure with GaN power devices in these days. A memory effect of Doherty amplifier affect operation characteristics for linearity and efficiency. This paper reports on electrothermal nonlinearity modeling and compensation for GaN Doherty amplifier's distortion. Also this paper reports on the dynamic expression of the instantaneous junction temperature as a function of the instantaneous dissipated power. We design distortion model for GaN Doherty amplifier and predistortion compensator for electrothermal memory effect from the proposed behavior model parameters. The simulations was evaluated by ADS Tools and GaN Doherty amplifier with 37dBm. The GaN Doherty amplifier with compensator enhanced about 16dB than without electrothemal memory effect compensator in 2-tone output spectrum.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.10
• /
• pp.813-820
• /
• 2021

In this study, a low-velocity impact test was performed to obtain the dynamic properties of solid propellants. The dynamic behavior of the solid propellant was examined by measuring the force and displacement of the impactor during the low-velocity impact test. The bending displacement was calculated by compensating for the local displacement caused by the low-velocity impact test in the form of three point bending and the shear displacement caused by using a short and thick solid propellant specimen. Stress and strain were calculated using compensated displacements and measured force, and dynamic properties of solid propellants were obtained from the stress-strain curve and compared with static bending test. The dynamic properties of solid propellant under the low-velocity impact loading at various operating temperature conditions such as room temperature(20 ℃), high temperature(63 ℃), and low temperature(-32 ℃) were compared and investigated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.1
• /
• pp.41-51
• /
• 2016

Friction generated from balls and grooves incurs temperature rise in the ballscrew system. Thermal deformation due to the heat degrades positioning accuracy of the feed drive system. To compensate for the thermal error, accurate prediction of the temperature distribution is required first. In this paper, to predict the temperature distribution according to the rotational speed, solid and hollow cylinders are applied for analysis of the ballscrew shaft and nut, respectively. Boundary conditions such as the convective heat transfer coefficient, friction torque, and thermal contact conductance (TCC) between balls and grooves are formulated according to operating and fabrication conditions of the ballscrew. Explicit FDM (finite difference method) is studied for development of a temperature prediction simulator. Its effectiveness is verified through numerical analysis.