• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.6
• /
• pp.307-313
• /
• 2008

The tensile deformation and shape recovery behaviors were studied in Ni-Ti shape memory wires showing different transformation characteristics by annealing at $200{\sim}600^{\circ}C$. Both R phase ${\rightarrow}$ B19' martensitic transformation at lower temperature and B2 ${\rightarrow}$ R phase transformation at higher temperature occurred in the shape memory wires annealed at $200{\sim}500^{\circ}C$. Transformation temperature and heat flow of B19' martensite increase but those of R phase main almost constant even with increasing annealing temperature. In the case of wires annealed and then cooled to $20^{\circ}C$, plateau on stress-strain curves in tensile testing can be observed due to the collapse of R phase variants and the formation of deformation-induced B19' martensite. In the case of wires annealed and then cooled to $-196^{\circ}C$, however, plateau on stress-strain curves does not appear and stress increases steadily with increasing tensile deformation. Comparing shape recovery rate with cooling temperature after annealing, shape recovery rate of the wire cooled to $20^{\circ}C$ is higher than that of the wire cooled to $-196^{\circ}C$ after annealing, and maximum shape recovery rate of 95% appears in the wire annealed at $400^{\circ}C$ and then cooled to $20^{\circ}C$. $R_s$ and $R_f$ temperatures measured during shape recovery tests are higher than $A_s$ and $A_f$ temperatures measured by DSC tests even at the same annealing temperature.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.6
• /
• pp.81-88
• /
• 2013

The component based propulsion modeling and simulation of an dual ramjet engine using Taylor-Maccoll flow equation and quasi 1-D combustor model. The subsonic and supersonic intake were modeled with Taylor-Maccoll flow having $25^{\circ}$ cone angle, the gas generator which transfers a pre-combustion gas into supersonic combustor was developed using Lumped model, and the determination of the size of nozzle throat of a gas generator was described. A quasi 1-D model was applied to model a supersonic combustor and the variation of temperature and pressure inside combustor were presented. Furthermore, the thrust and specific impulse applying fuel regulation by pressure recovery ratio and equivalence ratio were derived.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.326-332
• /
• 2009

New humidity-sensitive monomer, N-methacryloyl-N'-ethyl-N'-propyl piperazinium bromide (MANEPPB) was prepared by the quaternization reaction of N-methacryloyl-N'-ethyl piperazine (MANEP) with 1-bromopropane. Polyelectrolytes derived from the copolymers composed of MANEPPB/MMN/AA=60/35/5, 70/25/5, 80/15/5, 90/5/5 and 95/0/5 were prepared for the humidity-sensitive membranes, which were fabricated on the gold electrode by dipping method and were crosslinked by reacting copolymers with aziridine crosslinker, trimethylolpropane tris(2-methyl-1-aziridinopropionate) (TTAP). When the resistance dependences on the relative humidity of the sensors were measured, it was found that the resistance varied three orders of magnitude between 20 and 90%RH, which was satisfied with the requirement for the common humidity sensor operating at ambient humidity. Their hysteresis, temperature dependence, frequency dependence, response and recovery time and water durability were measured and evaluated as a humidity-sensing membrane.

• Membrane Journal
• /
• v.2 no.1
• /
• pp.67-73
• /
• 1992

The effects of after-treatment condition on the permeability of polysulfone hollow fiber membranes were investigated. It was well known that the permeability of and the rejection of hollow fiber membranes prepared by dry-wet spinning technique was highly affected by spinning conditions such as composition of spinning solution, inner and outer coagulant and spinning height. But these are also governed by after-treatment condition such as drying, hot water treatment and glycerine treatment. Since it was difficult to remove DMAc and NMP in membranes by washing with in cold water and even traces of such solvent affected the reproducibility of the membrane characteristics, the hot water-treatment should be required.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.12
• /
• pp.5-11
• /
• 2010

If the groundwater in rock joint is changed into ice, it induces the stress increment by volume increase. Also, if the ice is changed into groundwater again, the stress in joint decreases by volume decrease. The accumulated displacement and fatigues of joints are increased by the stress-hysterisis, induced from the continuous frost-thawing. Also the shear strength is decreased by them continuously. The stress-hysterisis is affected by the atmospheric temperature changes, whose behavior is visco-elasticity, usually. Therefore, Kelvin model could be used to analyze the frost-thawing behavior in winter. The measured data of total 5 points are examined, which are composed of 3 points of shallow joints and 2 points of deep joints. Because shallow weathered rocks have many joints, a lot of Kelvin model are connected and the behaviors are complicated. In case of deep joints, simple Kelvin model is applied and the behaviors are also simple.

• Applied Biological Chemistry
• /
• v.26 no.2
• /
• pp.132-136
• /
• 1983

The indole-3-acetic acid(IAA) oxidase activity of shoot and root tips of etiolated pea seedlings (Pisum sativum L. var. Sparkle) during and after chilling was determined. The IAA oxidase level of root tips was 4 to 15 times as high as that of shoot tips. During chilling the seedlings apical and subapical 5 mm shoot sections increased in IAA oxidase activity but apical and subapical 5 mm root sections decreased. When chilled plants were returned to $25^{\circ}C$ to recover, the enzyme activity had a tendency to restore to the activity level of controlled plants.

• The Korean Journal of Mycology
• /
• v.38 no.1
• /
• pp.29-33
• /
• 2010

KGD1 gene was cloned by functional complementation of defects in $\beta$-1,3-glucan synthase activity of the previously isolated Saccharomyces cerevisiae mutant LP0353, which displays a number of cell wall defects at restrictive temperature. We performed the gene disruption experiment to characterize the function of KGD1 gene, which encodes $\beta$-ketoglutarate dehydrogenase, in cell wall biosynthesis. The disruption of KGD1 showed the decreased growth rate, the increase of chitin synthases activity, alterations in cell wall composition, and increase of susceptibility to cell wall inhibitors such as Calcofluor white and Nikkomycin Z. These results suggested that KGD1 might be involved in cell wall biogenesis, especially the biosynthesis of $\beta$-1,6-glucan and chitin in S. cerevisaie.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.19-25
• /
• 2009

New polyelectrolytes derived from ionene-containing photocurable reactive oligomer (PIDM) were prepared for water-resistant humidity-sensitive membranes. The mixture of PIDM, hexamethylene dimethacrylate (HDM), pentaerythritol triacrylate dimer (SP1013), and photoinitiator was simultaneously coated on the sensor electrode with photoinitiated radical polymerization. The pretreatment of the substrates with vinyl-type silane-coupling reagent was performed for improving the water durability and stability of the sensors at high temperature and humidity. When the resistance dependences on the relative humidity of the crosslinked PIDMs were measured, it was found that the resistance varied three orders of magnitude between 20 and 90%RH, which was required for the humidity sensor operating at ambient humidity. Their hysteresis, temperature dependence, response time, water durability, and high temperature/humidity stabilities were measured and evaluated as a humidity-sensing membrane.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.4
• /
• pp.39-49
• /
• 2002

In this paper, the characteristics of RB(rubber bearing) were studied by various prototype tests on RB with low hardness rubber. The characteristics of RB were tested on displacements, repeated cycles, frequencies, vertical pressures, temperature, vertical stiffness and the capability of shear deformation. The prototype test showed that the displacement and vertical pressures were the most governing factors influencing on characteristics of RB. The effective stiffness and equivalent damping of RB showed small increment in high frequency range. After the repeated cyclic test with 50's cycles, the effective stiffness and equivalent damping of RB were almost constant compared with those of the 1st cycles due to low hysteretic damping. The shear modulus of RB was reduced after large deformation, and this value of RB was partly recovered after 40 days. Finally, the shear failure test of RB was conducted, the prototype was failed over 490% of shear strain, and real size RB was failed over 430% of shear strain.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.334-334
• /
• 2019

기후변화에 능동적으로 대처하기 위해서는 기후변화에 따른 수자원가용량의 변화를 정량적으로 평가할 수 있어야 한다. 평가결과의 신뢰도를 높이기 위해서 기후변화 시나리오는 지역기후 및 유역특성에 적합한 결과를 포함하여야 한다. 또한, 기후변화가 유역의 물순환계에 미치는 영향이 있다면, 물순환 개선 기술을 통해 지속가능한 유역 물환경을 구축하는 것이 필요하다. 유역 물순환 개선 기술은 기후변화가 진행 중에 있거나 예상되는 지역에 대하여 강우로부터 발생되는 유출을 지연, 저류, 침투시켜 지속가능한 물순환 체계를 유지하고 회복하도록 하는 기법이라 할 수 있다. 한국건설기술연구원에서는 기후변화에 따른 영향을 평가하고 적응 대책을 수립하기 위한 실무적인 유역 물순환 개선 및 평가 모형인 CAT3(Catchment hydrologic cycle Assessment Tool 3)을 개발하였으며 본 모형은 침투시설, 저류시설, 습지, 빗물저장시설과 같은 물순환 개선시설에 대한 효과를 정량적으로 평가할 수 있다. 본 연구에서는 팔당댐 상류의 경안천 유역을 대상으로 APCC 기후변화 시나리오 통계적 상세화 자료를 활용하여 물순환 개선 기술의 적용성을 평가하였다. 통계적 상세화 자료는 APCC에서 개발된 AIMS(APCC Integrated Modeling Solution) 플랫폼을 이용하였다. AIMS는 다양한 기후정보를 기반으로 사용자 관점에서 상세화를 수행할 수 있는 장점이 있다. 상세화 기법은 SDQDM(Spatial Disaggregation Quantile Delta Mapping) 방법을 이용하였다. 상세화된 기후자료는 과거자료의 재현성 및 미래 기간에 대한 왜곡도를 평가하기 위해 극한기후지수(Climate Index)를 이용하는데 본 연구에서는 장기간에 걸친 수자원가용량의 평가 및 예측을 위해 연강수량(PRCPTOT)을 사용하였으며 증발산량의 평가 및 예측에 영향을 미치는 온도 관련 극한기후지수는 평균기온 개념의 DTR(TMAX&TMIN)을 이용하였다. 통계적 상세화 과정을 통해 최종적으로 HadGEM2-CC, INMCM4, CanESM2 시나리오를 선택하였으며 각 시나리오별 물순환 개선 기술을 적용한 후 미래의 수문학적 변동성을 평가하였다.