• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.2
• /
• pp.143-151
• /
• 2010

The impact of climate change on rice plants in Gangwon province was examined by comparing the climatic conditions during the recent 10 years (2000~2009) with those of normal (1971~2000) years, and by evaluating the rice plant responses. The daily mean air temperature increased by $0.5^{\circ}C$ while the daily range decreased by $0.1^{\circ}C$ as compared with the normal years. During the main rice growing period in field (from June to September) precipitation increased from 900 to 1,051mm and sunshine hours decreased from 704 to 619 hours. The respiration consumption effect during the rice growing period increased by 0.07 as a result of increased air temperature and reduced sunshine hours. The optimum heading date (determined by the mean air temperature for 40 days after the heading) was delayed in Chuncheon, Hongcheon, Wonju, and Gangneung compared with the normal. The maximum climatic yield potential based on mean temperature and sunshine hours for 40 days after the rice heading decreased by 94 kg/10a mainly due to the decrease in sunshine. The mean air temperature for 40 days after the rice heading from 1999 to 2009 in Chuncheon, Cheorwon, and Gangneung was generally above $22^{\circ}C$ implying that yield and quality of rice can be reduced. Therefore, it is necessary to delay the heading date by planting mid- to late-maturing varieties or by changing the transplanting date in order to produce high quality rice and to maintain rice productivity. In addition, it is also important to develop or select cultivars suitable to changing climate for each region in Gangwon province.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.2
• /
• pp.1-34
• /
• 1974

These experiments pertain to various factors influencing the quantitative characters of cocoon crops in summer and early autumn seasons. Initially, in order to establish the possible ways of the silkworm rearing more than three times a year in Korea, the author attempted to get further information about the various factors affecting the cocoon crop in every silkworm rearing season. The trials were conducted eleven times a year at four places for three years. The field trial was conducted with 19 typical sericultural farmers who had been surveyed. At the same time the author statistically analyzed the various factors in close relation to tile cocoon crop in autumn season. The effect of guidance on 40 sericultural farmers was analyzed, comparing higher level farmers with lower level farmers ; and the author surveyed 758 non-guided farmers near the guided farmers during both spring and autumn seasons. In addition, another trial on the seasonal change of leaf quality was attempted with artificial diets prepared with leaves grown in each season. It was found that related factors to cocoon crops in summer and early autumn seasons appeared to be leaf quality, and temperature for young and grown larvae. A 2$^4$ factorial experiment was designed in summer season, and another design with one more level of varied temperature or hard leaf added to a 24 factorial experiment was conducted in early autumn. The experimental results can be summarized： 1. Study on the cocoon crops in the different rearing seasons 1) It was shown that earlier brushing of silkworm generally produced the most abundant cocoon crop in spring season, and earlier or later than the conventional brushing season, especially earlier brushing was unfavorable for the abundant cocoon crop in autumn season. 2) The cocoon crop was affected by the rearing season, and decreases in order of sire with spring, autumn, late autumn, summer and early autumn seasons. 3) It was Proved that ordinary rearing and branch rearing were possibles 4 times a year ; in the 1st, 3rd, 8th, and 10th brushing season. But the 11th brushing season was more favorable for the most abundant cocoon crop of branch rearing, instead of the 10th brushing season with ordinary rearing. 2. Study on the main factors affecting the cocoon crop in autumn season 1) Accumulated pathogens were a lethal factor leading to a bad cocoon crop through neglect of disinfection of rearing room and instruments. 2) Additional factors leading to a poor cocoon crop were unfavorable for rearing temperature and humidity, dense population, poor choice of moderately ripened leaf, and poor feeding techniques. However, it seemed that there was no relationship between the cocoon crop and management of farm. 3) The percentage of cocoon shell seemed to be mostly affected by leaf quality, and secondarily affected by the accumulation of pathogens. 3. Study on the effect of guidance on rearing techniques 1) The guided farms produced an average yearly yield of 29.0kg of cocoons, which varied from 32.3kg to 25.817g of cocoon yield per box in spring versus autumn, respectively. Those figures indicated an annual average increase of 26% of cocoon yield over yields of non-guided farmers. An increase of 20% of cocoon yield in spring and 35% of cocoon yield in autumn were responsible. 2) On guided farms 77.1 and 83.7% of total cocoon yields in the spring and autumn seasons, respectively, exceeded 3rd grade. This amounted to increases of 14.1 and 11.3% in cocoon yield and quality over those of non-guided farms. 3) The average annual cocoon yield on guided farms was 28.9kg per box, based on a range of 31.2kg to 26.9kg per box in spring and autumn seasons, respectively. This represented an 8% increase in cocoon yield on farms one year after guidance, as opposed to non-guided farms. This yield increase was due to 3 and 16% cocoon yield increases in spring and autumn crops. 4) Guidance had no effect on higher level farms, but was responsible for 19% of the increases in production on lower level farms. 4. Study on the seasonal change of leaf quality 1) In tests with grown larvae, leaves of tile spring crop incorporated in artificial diets produced the best cocoon crop; followed by leaves of the late autumn, summer, autumn, and early autumn crops. 2) The cocoon crop for young larvae as well as for grown larvae varied with the season of leaf used. 5. Study on factors affecting the cocoon crops in summer and early autumn A. Early autumn season 1) Survival rate and cocoon yield were significantly decreased at high rearing temperatures for young larvae 2) Survival rate, cocoon yield, and cocoon quality were adversely affected by high rearing temperatures for grown larvae. Therefore increases of cocoon quantity and improvement of cocoon quality are dependent on maintaining optimum temperatures. 3) Decreases in individual cocoon weight and longer larval periods resulted with feeding of soft leaf and hard leaf to young larvae, but the survival rate, cocoon yield and weight of cocoon shell were not influenced. 4) Cocoon yield and cocoon quality were influenced by feeding of hard leaf to grown larvae, but survival rate was not influenced by the feeding of soft leaf and hard leaf. 5) When grown larvae were inevitably raised at varied temperatures, application of varied temperature in the raising of both young and grown larvae was desirable. Further research concerning this matter must be considered. B. Summer season 1) Cocoon yield and single cocoon weight were decreased at high temperatures for young larvae and survival rate was also affected. 2) Cocoon yield, survival rate. and cocoon quality were considerably decreased at high rearing temperatures for grown larval stages.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.21-29
• /
• 2023

In this study, the stress characteristics of temporary fixed steel rods were analyzed in the "temporary fixing system using internal prestressing tension", which is mainly applied to the construction of superstructures by FCM. It was difficult to confirm the changes in initial tensile force in this system because the steel rod was internally connected to the pier and the PSC BOX. Therefore, measurement was performed before and after the completion of each segment using an FBG sensor to measure the change in the micro length of the steel rod. The results of the analysis showed that 75% to 90% of the maximum vertical contraction of the steel rod that occurred until the completion of the cantilever segment occurred in the fixing ~ 1segment, and the maximum loss of initial prestressing force was 39%. Such excessive loss of tension force to 1 segment means that tension is needed to improve the precision of construction during the fixation, and re-tension is needed to secure stability for conduction of cantilever segments after the completion of 1segment. In the 2 ~ last segment, the stress of the steel rod decreased gradually, and in the summer, the decrease in stress tended to partially recover due to the increase in the length of the steel rod corresponding to the increase in the vertical volume of PSC BOX. The dominant factor in the stress change in 2~ last segment in this phenomenon is judged to be the change in the length of the steel rod according to the temperature. Unlike the change in length, the relaxation was 1.2-2.7%, which was mostly offset by the opposite stress corresponding to the temperature stress. Therefore, a plan was proposed to improve the internal stress, such as adjusting the fixation time.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.3
• /
• pp.109-119
• /
• 2016

This study was conducted to analyze the effect of yearly changes in growing degree days (GDD) on the potential distribution and growth of Quercus mongolica in Korea. Annual tree-ring growth data of Quercus mongolica collected by the $5^{th}$ National Forest Inventory were first organized to identify the range of current distribution for the species. Yearly GDD was calculated based on daily mean temperature data from 1951 to 2010 for counties with current distribution of Q. monglica. When tree-ring growth data were analyzed through cluster analysis based on similarity of climatic conditions, seven clusters were identified. Yearly GDD based on daily mean temperature data of each county were calculated for each of the cluster to predict the change of potential distribution. Temperature effect indices were estimated to predict the effect of GDD on the growth patterns. In addition, RCP 4.5 and RCP 8.5 of climate change scenarios were adopted to estimate yearly GDD and temperature effect indices from 2011 to 2100. The results indicate that the areas with low latitude and elevation exceed the upper threshold of GDD for the species due to the increase of mean temperature with climate change. It was also predicted that the steep increase of temperature will have negative influences on tree-ring growth, and will move the potential distribution of the species to areas with higher latitude or higher elevation, especially after the year of 2050. The results of this study are expected to provide valuable information necessary for estimating local growth characteristics and for predicting changes in the potential distribution of Q. mongolica caused by climate change.

• Journal of the East Asian Society of Dietary Life
• /
• v.11 no.4
• /
• pp.274-280
• /
• 2001

The chemical forms of calcium compounds in perilla leaves and their changes after harvest were investigated. The four types of calcium compounds extracted were as follows: water soluble calcium(F-I: mainly water soluble organic acid salts and calcium ion), IN-sodium chloride soluble calcium(F-II: calcium-pectate and calcium-carbonate), 2%-acetic acid soluble calcium(F-III: calcium-phosphate), and 5%-hydrochloric acid soluble calcium(F-IV: calcium-oxalate). The calcium content of perilla leaves was not found to vary with their age. Relatively high levels of F-l (28.4~39.5) and F-II (34.4~47.4) were found in young and mature leaves while the F-IV constituted 15.6~21.6% of the total calcium. The F-IV calcium contents of perilla. spinach and jaso were 16.8, 42.4 and 22.3%, respectively. In contrast to calcium. magnesium existed as water soluble magnesium at the highest content of 90.6% in spinach while 62.9% and 16.8% of the total magnesium existed as water soluble magnesium in perilla and jaso, repectively. The change in vitamin C and F-IV calcium content were examined for 7 days after harvest. Vitamin C content decreased slowly at the beginning but rapidly from the 4th day after harvest. On the other hand, the F-IV calcium content increased slowly at the beginning and rapidly from the 4th day of observation. This result suggests that the increase in F-IV calcium is related to the decrease in vitamin C content. This phenomena was more distinctly observed at 2$0^{\circ}C$ than 5$^{\circ}C$.

• Current Research on Agriculture and Life Sciences
• /
• v.17
• /
• pp.31-38
• /
• 1999

Trend of some hydrologic features such as precipitation, runoff and reservoir storage rates in the five great river systems of Han, Nakdong, Keum, Yeongsan and Seomjin river watershed areas were surveyed and analysed. The sample period of Sept. 1994 to Aug. 1998 (four years) was chracterized by unusual climatic features such as El Nino, La Nina and areal terrible storms. And also average values of rainfall and runoff of the priod of 1961 to 1990 (30 years) were surveyed and analysed compared with the sample preiod events for the same river systems. In case of the monthly mean rainfall of the sample period (Sept. 1994 to Aug. 1998 : 48 months) in the five great river systems, 20 months, 19 months, 20 months, 21 months and 18 months in the Han, Nakdong, Keum, Yeongsan and Seomjin river system respectively were higher than monthly average rainfall records of the 30 year records. For the monthly runoff in the same river systems, 7 months, 9 months, 7 months, 11 months and 11 month in the Han, Nakdong, Keum, Yeongsan and Seomjin river systems respectively were higher than the monthly average runoff of the period of 30 years. For the storage rates, most of the dams in the Han river systems were highly stored through the year continuously and Paldang dam was specially higher than the other dams in the same river system. And most of the dams in the other river systems were stored irregularly but getting much better than early time during the 48 months. And special climatic features were not found during the sample period of 48 months, Sept. 1994 to Aug. 1998.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.780-787
• /
• 2019

As a carbon-free, green growth alternative, internal and external interest in hydrogen energy and technology is growing. Hydrogen was added to co-axial methane, methane-propane, and methane-propane-ethane diffusion flames, which are the main ingredients of LNG, to evaluate its effect on flame formation and combustion products. The variation in combustion products produced by adding hydrogen gradually to diffusion pyrolysis at room temperature and normal pressure conditions was observed experimentally by using a gas analyzer, and the shape of diffusion pyrolysis was observed step by step using a digital camera. The experimental results showed that the production volume of nitrogen oxides tended to increase and became close to linear as hydrogen was added to the diffusion pyrotechnic. This is because the relatively high temperature of heat insulation and fast combustion speed of hydrogen facilitated the production of thermal NOx. On the other hand, CO2 production tended to decrease as hydrogen was added to reduce the overall carbon ratio contained in the mixed diffusion flame of methane, methane-propane, and methane-ethane-propane. This means that the mixed fuel use of LNG-hydrogen in ships may potentially reduce emissions of CO2, a greenhouse gas.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.6
• /
• pp.433-438
• /
• 1999

Magneto-acoustic emission (MAE) energy and hardness were measured in the reactor pressure vessel steel (SA508 Steel) for the various neutron fluence, irradiated dose up to $10^{18}n/cm^2$. The hardness was nearly a constant up to $10^{16}n/cm^2$, but it was rapidly increased with an increase of the neutron irradiation above $10^{17}n/cm^2$. It may be considered that the increase of hardness is due to the hindrance of dislocation motion induced defect clusters by irradiation. On the other hand. the MAE energy was slowly decreased as the neutron irradiation increased up to $10^{16}n/cm^2$ and it was rapidly decreased with an increase of the neutron irradiation above $10^{17}n/cm^2$. The decrease of the MAE energy may be considered as an increase of the defect clusters which is very sensitive to the $90^{\circ}$ domain wall motion. Furthermore, the change of MAE energy and hardness had nearly a linear relationship. but the change of MAE energy was more significant than the change of the hardness. Therefore, MAE may be considered as a very useful technique for the nondestructive evaluation of irradiation damage.

• Journal of the Korean Vacuum Society
• /
• v.11 no.2
• /
• pp.87-96
• /
• 2002

Outgassing from such sources as paints, coatings, adhesives and other non-metallic surfaces can contaminate satellites, especially second surface mirror and optical lens, it cause satellite to fail in own missions. The vacuum bake-out test using high temperature(more than $85 ^{\circ}C$)and high vacuum(less than $5.0{\times}1-^{-3}$ Pa) certify that the components of satellite work properly and can survive and operate in space environment like high vacuum. In the bake-out chamber installed at SITC of KARI, Rotary vacuum pump and Booster pump produce low vacuum of 5.0 Pa, and then two cryopumps produce high vacuum of below $5.0{\times}10^{-3}$ Pa. Also 48 ceramic heaters were provided to simulate high temperature. During the vacuum bake-out test, we detected contaminants using RGA(Residual Gas Analyzer) and measure the outgassing rate of the contaminant using the TQCM(Thermoelectric Quartz Crystal Microbalance). Also, IR/UV Spectrometer and witness plate be used to certify that the components were suitable for the spacecraft. This paper includes the preparation and procedures of the bake-out test for SAR(Solar Array Regulator) and MLI(Multi Layer Insulator), which were the components of the spacecraft. Especially, we discussed the methods and results of the contamination measurement. In the bake-out for SAR, the contamination was measured continuously although it was on the decrease from TQCM results. And RCA established that it is a highly polymerized compound. In the MLI bake-out using RGA and witness plate, we didn't detect any contamination materials.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.86-92
• /
• 2012

A characteristic study of chlorine dioxide generation by the electrolysis system was performed after chlorite ($ClO_2^-$) is adsorbed from sodium chlorite by a polymer ion exchange resin. A strongly basic anion exchange resin was used and a Ti plate coated with Ru and Ir was used as an electrode. Various parameters such as reaction stirring velocity, reaction temperature, chlorine dioxide product concentration, ion exchange resin content and product maker type for the adsorption quantity in the chlorite adsorption of ion exchange resin were investigated and found the ion exchange resin with the maximum adsorption quantity. A generation trend of chlorine dioxide was observed by the electrolysis system and optimum conditions on the desired value were found using response surface design of DOE (Design of Experiments). The strongly basic anion exchange resin with the maximum adsorption quantity was SAR-20 (TRILITE Gel type II) and the adsorption quantity was around 110 mg/IER (g). Observed generation optimum conditions of chlorine dioxide were constant-current (electrode area base; $A/dm^2$) and flow rate of $N_2$ gas (4.7 L/min) at the desired value of sterilization (900~1000 ppm, 1 h).