Kim, Suk-Goo;Kwack, Kae-Dal;Yoon, Sahng-Hyun;Park, Chul-Hyun
Proceedings of the KIEE Conference
/
1999.07d
/
pp.1827-1829
/
1999
반도체 소자가 고집적화 되고 미세화 될수록 좁은 면적에 여러 기능을 가진 우물을 형성시켜야하나 기존의 우물로는 고온 장시간 열처리로 인하여 측면 확산이 깊게 되고, 불순물 농도 분포는 표면으로부터 농도가 점차 낮아진다. 따라서 기존 우물의 불순물 분포로는 기생 트랜지스터에 의한 렛치-엎과 알파 입자에 의한 SER의 감소를 위하여 필요한 벌크에서의 고농도 분포를 유지하기가 곤란하다. 이러한 문제는 차세대 반도체 개발을 위해서는 반드시 해결해야 할 것이며 이것을 해결할 수 있는 공정으로는 고 에너지 이온 주입과 저온, 단시간 열처리이다. 고 에너지 이온 주입 시의 불순물 분포를 어떻게 제어할 것인가에 대한 것과 여기서 부수적으로 나타나는 격자 손상과 그 회복 및 잔류결함의 성질을 어떻게 알고 이를 게터링 등에 이용할 것이냐에 대한 것이다. 실리콘 기판 내로 가속된 이온은 실리콘 격자와 충돌하면서 많은 1차 결함이 생기고. 이들은 후속 열처리 과정에서 활성화되면서 대부분은 실리콘 격자의 위치에 들어가 활성화되고. 그 나머지는 실리콘내의 격자간 산소, 격자간 실리콘. 격자 빈자리와 상호 작용을 하여 2차 결함을 형성한다. 에피택셜 웨이퍼와 p-type웨이퍼에 비소 이온을 고에너지로 주입후 2단계 열처리에 의한 농도분포변화와 핵생성과 결함성장에 관해 실험하였고, 핵생성온도는 $600^{\circ}C$이하이고, 성장에 필요한 온도는 $700^{\circ}C$이상이다.
In order to improve the thermal stability of wood plastic composites (WPC), thermal degradation behavior of WPC in this study was investigated by the addition of wood flour and fire retardant after hybridization of wood flour and ammonium polyphosphate (APP) into polypropylene (PP) matrix. Thermal degradation behavior of all formulations was analyzed with thermogravimetric analyzer under nitrogen environment at heating rate of $10^{\circ}C/min$. As the thermal degradation temperature of wood flour is lower than that of PP, char layer formed by the wood flour decreases the speed of heat transfer to PP. In addition, the char layer increases the 2nd thermal degradation temperature and decreases the 2nd thermal degradation speed. The WPC treated with APP increases the 1st and 2nd degradation temperatures. In the case of WPC with high loading level of wood flour, the 1st thermal degradation temperature and 2nd thermal degradation rate were increased by the addition of APP, and then the amount of remnants at high temperature was increased by the increase of the APP loading level. In the case of WPC treated with APP, the amount of the remnants at high temperature was increased with the increase of wood flour content from 10 wt% to 50 wt%, indicating that char formation of the APP and wood flour occurred at the same time, resulting in high thermal stability effect by the increase of wood flour content.
소성 영역(Sintering zone)에서 클링커(Clinker)의 형상 형성은 시멘트 생산 공정에서 가장 중요한 생산 공정중의 하나이다. 소성공정의 진단 및 최적 제어의 핵심은 써모그래프(Thermo graph), 즉 적외선 카메라를 이용한 온도 분포의 측정이다. 여기에서 다룰 ''PIT Indicator'' 시스템은 분진이 많은 열악한 산업 현장의 연소 시스템에 적용할 수 있도록 특별히 설계한 공냉식의 2개 채널을 가진 광학 장비에 기초하고 있다. 비디오 영상과 써모그래프 이미지 그리고 다양한 연소 특성이 카메라를 통하여 얻어지고 자기 학습 기능을 가진 소프트웨어에서 기록되고 분석된다. 이때 얻은 데이터는 수학적 모델에서 온라인으로 Free Lime 함유율을 예측하는데 이용된다. 열분포의 써모그래프 표시와 공정상의 다양한 운전 특성을 분석하여 주는 ''PIT Indicator'' 소프트웨어를 통하여 다른 공정 제어 시스템과 연결이 가능하다. 이와 같은 하드웨어와 소프트웨어를 이용하여 최적화가 필요한 여러요소들의 최적화를 동시에 그리고 온라인으로 수행할 수가 있다. Free Lime 함유율의 연속적인 온라인 연산을 통해 생산 설비 및 공정에 맞는 최소한의 에너지를 Kiln 에 공급함으로써 근본적으로 1차 연료의 절감이 가능하고 NOx와 같은 유해 가스의 배출량도 제어할 수 있다. 또한 별도로 NOx에 대한 모델을 개발하여 NOx를 정확하게 예측하는 것도 가능하다.
EV(Electric Vehicle) 차량에서 BMS(Battery Management System) 은 모터에 공급되는 고전압 배터리의 충전상태를 감지하여 VCU(Vehicle Control Unit)에 전송하게 된다. VCU에서는 배터리의 충전상태를 확인하여 모터 구동 전략을 수립하여 각 제어기에 전송하게 된다. 위와 같이 EV에서 배터리 충전상태를 정확하게 감지하지 못한다면, 모터 구동을 위한 전략 수립에 많은 제약이 따르게 된다. 정확한 배터리 충전 상태를 감지하기 위해서는 배터리 각 셀의 전압/전류/온도 등을 측정하여 연산에 의해 결정된다. 그 중 셀 전압 측정 방식은 Photomos relay를 이용한 방식으로 하드웨어적인 오차에 ${\pm}$수십mV보다 더둑 더 정밀하게 측정할 수 있는 방법이 없었다. 하지만, 셀 전압 측정 정밀도를 향상시키기 위해 신규로 개발된 battery monitoring IC를 이용한 BMS의 H/W 개발에 대해 설명할 것이다. 또한, Monitoring IC를 이용한 BMS의 셀 전압 측정 정밀도를 얼마나 개선시킬 수 있는지에 대해 연구하였다.
A maximum power point tracking(MPPT) converter, to enhance the converter efficiency is evaluated within the laboratory. The converter is controlled to track the maximum power point of the input photovoltaic(PV) source by varying the input and output parameter-conditions of irradiation, temperature, etc. The purpose of this paper is to develop a new maximum power point tracking(MPPT) using neural controller. Neural controller are applied to control of MPPT by boosting converter duty ratios compensation effect with 8 bit single chip 8051 microcontroller.
Transactions of the Korean Society of Mechanical Engineers B
/
v.33
no.8
/
pp.573-579
/
2009
A thermal mass air flow sensor, which consists of a micro-heater and thermal sensors on the silicon-nitride thin membrane structure, is micro-fabricated by MEMS processes. Three thermo-resistive sensors, one for the measurement of microheater temperature, the others for the measurement of membrane temperature upstream and downstream of the micro-heater respectively, are used. The micro-heater is operated under the constant temperature difference mode via a real time controller, based on inlet air temperature. Two design models for microfabricated flow sensor are compared with experimental results and confirmed their applicabilities and limitations. The thermal characteristics are measured to find the best flow indicator. It is found that two normalized temperature indicators can be adopted with some advantages in practice. The flow sensor with this control mode can be adopted for wide capability of high speed and sensitivity in the very low and medium velocity ranges.
Ha, Ju-Hyung;Cho, Yun-Gu;Lee, Kewn-Chu;Lim, Chang-Keun
Journal of the Korea Concrete Institute
/
v.26
no.3
/
pp.287-297
/
2014
Heat of hydration of mass concrete is one of the most important factors that significantly affect structural quality and construction period. Therefore, appropriate methods to control heat of hydration are essential technologies for mass concrete construction. In this study, probability of thermal cracking was checked by thermal analysis prior to the construction of a turbine foundation in a domestic power plant. Subsequently, changes of concrete mix proportion and an effective curing method were proposed to control heat of hydration of mass concrete structures. Concrete manufactured by slag cement was proposed instead of concrete produced by ordinary Portland cement, and an automated curing method was proposed to improve the curing method using typical moist curing with blanket. The automated curing method maintains the temperature difference between center and surface of concrete below a setting value by temperature monitoring. Concrete with slag cement was used for actual construction. One of two identical turbine foundations was cured by an insulated curing method, and the other was cured by the automated curing method to compare the curing methods. And then, the effects of control of heat of hydration were evaluated based on temperature/strain monitoring and crack investigations.
The heat temperature of a light emitting diode (LED) is investigated with the thermoelectric device (TED). The Peltier effect of the thermoelectric device is used to control the heat radiation and the junction temperature of high-power LEDs. For the typical specific current (350 mA) of high-power (1 W) LEDs, the LED temperature and the p-n junction temperature become $64.5^{\circ}C$ and $79.1^{\circ}C$, respectively. For 0.1~0.2 W driving power of TED, the LED temperature and the junction temperature are reduced to be $54.2^{\circ}C$ and $68.9^{\circ}C$, respectively. As the driving power of the TED increases over 0.2 W, the temperature of LED itself and the junction temperature are increased due to the heat reversed from the heat-sink to LED. As the difference of temperature between LED and the heat-sink is increased, the quantity of reversed heat becomes larger and it results to degrade the cooling capability of TED.
Proceedings of the Korean Society for Bio-Environment Control Conference
/
2002.04a
/
pp.110-114
/
2002
단동형 비닐하우스는 연동형 비닐하우스에 비해 생력화 및 자동화가 미흡한 재배시설이다. 그러나 전국 시설면적 52,189 ha 중 90%이상이 단동형 비닐하우스로서 대부분 초기투자 부담이 적고 파이프를 이용하여 손쉽게 설치할 수 있는 단동형 비닐하우스를 선호하고 있는 실정이다. 단동형 비닐하우스는 각 지역의 특성에 적합한 고유형 시설로 발전하여 왔기 때문에 폭이 5-6m, 높이가 2-3.5m 정도인 대형 터널형태와 폭이 l0m 이상인 광폭형태 등 규격이 다양하게 설치되어있다. (중략)
본 연구는 LED를 활용한 기능성 숟가락에 관한 것으로, 누구나 쉽게 접하는 기호식품인 차를 뜨겁게 마실 때와 차갑게 마실 때 부주의에 의한 신체 손상을 유발하는 것을 사전에 예방하기 위한 것이다. 특히 유아에게 이유식을 수유하는 경우 어머니들은 차고 뜨거움을 손수 확인하고 있는 실정으로 안전성에 노출되어 있다. 따라서 본 연구에서는 이러한 문제를 해결하기 위하여 온도제어 기술을 이용하여 LED 색의 차이로 기준온도 이하이면 파란 색을, 기준온도 이상이면 빨간 색을 발광하는 원리를 통해 LED 색상 변화로 차고 뜨거움을 사용자에게 쉽게 인지시켜 안전성을 확보하기 위함이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.