• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.237-243
• /
• 2011

As the effluent quality standard of the municipal wastewater treatment plant (MWTP) has been strengthened, the treatment of the recycle water containing high concentration of ammonium nitrogen has been considered as one of retrofit methods for upgrading the exising MWTPs. In this study, nitritation, economic nitrogen removal process, was induced by laboratory-scale reactor at the $35^{\circ}C$, $20^{\circ}C$, and $10^{\circ}C$ temperature conditions using anaerobic digester supernatant. The stable nitritation was achieved over $20^{\circ}C$, but nitrification was induced at $10^{\circ}C$. It means that the nitritation was affected by SRT and temperature. SRT, demanded for nitritation, is changed according to the temperature. Therefore, it is considered that SRT and temperature are important factors in nitritation. Also, it is approved that inducing the ammonium nitrogen removal and the nitritation are more beneficial over $20^{\circ}C$. The conclusion of this study can be used for the important basic reference when nitritation process is applied for MWTPs.

• Food Engineering Progress
• /
• v.15 no.1
• /
• pp.28-33
• /
• 2011

UV-C and -B types of lamps, and $H_2O_2$ as a photocatalytic material were applied to optimize processing conditions for pesticides removal in Mandarine orange peel. Factors to affect the removal of pestrcides were arranged as a function of irradiation temperature, irradiation time, and $H_2O_2$ spray concentration. The optimum processing conditions for the chloropyrifos and the EPN removals in Mandarine orange peel were irradiation time of 60 min, irradiation temperature of $45^{\circ}C$ and $H_2O_2$ spray concentration of 1000 ppm. However, the optimum processing conditions for methidathion removal were 60 min of irradiation time, $40^{\circ}C$ of irradiation temperature and 1000 ppm of $H_2O_2$ spray concentration. The residual percentages of chloropyrifos, EPN and methidathion were 46, 49 and 28% after above irradiation processing, respectively.

• Korean Journal of Optics and Photonics
• /
• v.30 no.4
• /
• pp.167-173
• /
• 2019

In this paper, we studied characteristics of stimulated Brillouin scattering (SBS) suppression in high-power fiber lasers by using apparatuses applying a temperature gradient (i.e. a step, a sine shape, and random temperature distribution) along the fiber. From the ytterbium-doped polarization-maintaining fiber master oscillator power amplifier built in house, we measured the back-reflection spectrum and power for each temperature gradient, showing that the step shape temperature distribution was the most effective way to suppress SBS. In addition, we investigated the interaction of pseudo-random binary sequence phase modulation conditions and temperature gradients for SBS suppression.

• Composites Research
• /
• v.35 no.5
• /
• pp.328-333
• /
• 2022

In this study, the fabrication conditions of CFRP rebar were controlled to derive the correlation between flexural strength and pore characteristics. The fabrication conditions of CFRP rebar were adjusted for presence or absence of rib, resin temperature, and curing furnace temperature. Flexural strength and pore characteristics of fabricated CFRP rebar were analyzed. The flexural strength of CFRP rebar was changed depending on the fabrication condition, such as the presence or absence of rib, the resin temperature, and the curing furnace temperature. It was confirmed that the flexural strength of CFRP rebar was significantly lowered when the rib was not wound. As a result of Nano X-ray CT analysis, the max. pore diameter was shown in CFRP rebar prepared at a resin temperature of 60℃. According to optical microscopic analysis, the maximum porosity was 6.89% in No. 1, and the minimum porosity was 2.88% in No. 7. The correlation coefficient between porosity used optical microscopy and flexural strength was -0.64, which was higher than the correlation coefficient between porosity or pore size used Nano X-ray CT and flexural strength.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.2
• /
• pp.43-47
• /
• 2009

Respiration and quality of persimmon fruits were monitored through the storage at 0, 5, 15 and $25^{\circ}C$. Respiration rate data at different temperatures were used for determining the $O_2$ and $CO_2$ permeabilities required to maintain the optimal package atmosphere (1~3% $O_2$, 4~7% $CO_2$). The estimated gas permeabilities were then compared to those of available plastic films for examining their potential application at various temperature conditions. $O_2$ consumption and $CO_2$ production were at similar order and leveled at stable value after initial time span with higher rates measured at higher temperatures. Major quality indexes during storage were observed to be ascorbic acid content change and firmness destruction with the most significant changes at $25^{\circ}C$ Higher $O_2$ and $CO_2$ permeabilites were required at higher temperatures, and common plastic films were shown to be unable to satisfy those requirements. Films or devices of high permeation property such as silicone rubber or microporous film may be combined to increase the permeation properties satisfying the required high gas permeabilities.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.3
• /
• pp.17-26
• /
• 2022

Domestic district heating system needs safety management guidelines using the change of surface temperature to detect damages to buried heat pipes. This paper performed numerical analyses on the temperature change of ground surface due to the burial and leakage of heat pipes. Temperature difference between the ground surface above the buried heat pipes and the surrounding surface rises to a crescendo between 3 am and 8 am. It is more significant in winter rather than in summer. Low groundwater level magnifies the temperature increase of the ground surface by the heat pipe, which is smaller in the asphalt pavement than in the bare soil. Without leakage of the buried heat pipe, the temperature increment on the ground surface by the heat pipe is within 3.0℃ in the bare soil and 3.5℃ in the asphalt pavement. Leakage of the supply heat pipe in the bare soil increases the temperature on the ground surface gradually in the summer but rapidly in the winter. Asphalt pavement shows a lower increment and increasing rate of the temperature on the ground surface due to pipe leakage than bare soil surface. And leakage on both sides of the supply pipe takes 1-2 days for the temperature difference from the surrounding soil surface to reach 10℃.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.782-786
• /
• 2009

Thiocapsa roseopersicina NCIB 8347은 purple sulfur bacteria이며 광합성종속영양 조건에서는 nitrogenase 효소계가 유도되어 질소를 고정하며, 수소를 발생한다. 또한 광합성독립영양 조건에서는 hydrogenase 효소계가 유도되어 3~4개 종류의 특성이 다른 hydrogenase가 membrane에 결합되어 있거나, cytoplasma에 존재하며, 이 중의 일부는 산소농도와 온도의 상승에도 비교적 안정하다. 본 연구에서는 T. roseopersicina NCIB 8347이 광합성종속영양 조건에서 수소를 생산할 수 있는 제반 배양조건을 최적화하고, nitrogenase와 일부 hydrogenase역가를 측정하여 purple non-sulfur bacteria, Rhodobacter sphaeroides KD131의 nitrogenase와 비교하여 수소생산을 최적화하였다. 할로겐램프를 8-9 $Klux/m^2$로 조사할 때와 배양온도 $26{\sim}30^{\circ}C$, 배양시간 72시간에서 균체 성장과 수소생산이 가장 높았다. T. roseopersicina NCIB 8347는 광합성 독립영양, 종속영양 조건에서 모두 성장 할 수 있었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.37-37
• /
• 1998

중형항공기용 터보펜 엔진의 성능모사와 LQR 제어기 설계에 대한 연구를 수행하였다. 동적 성능모사를 설계점으로 선정한 지상최대이륙조건과 탈설계점으로 선정한 최대상승조건과 순항조건에 대하여 Step 증가, Ramp 증가, Ramp 감소, Step증가 후 Ramp 감소의 4가지 연료공급에 조건에 대하여 수행되었다. 성능모사 결과 모든 비행조건에서 연료를 Step 증가시킬 경우 고압터보빈의 입구온도가 제한온도인 3105$^{\circ}$R을 초과함을 확인하였고, 최대 상승조건에서 연료를 Step 증가시킬 경우가 4.5초 이내에 Ramp 증가시킬 경우 고압압축기에 서지가 발생함을 확인하였다. 따라서 고압터어빈의 오버슈트와 고압압축기의 서지를 동시에 제어할 수 있는 다변수 제어기의 설계가 필요함을 확인하였다.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.3
• /
• pp.399-407
• /
• 2008

The clamping of torque shear bolt is based on KS B 2819. It was misunderstood that the tension force of the TS bolt was induced generally at the break of pin-tail specified. However, the clamping forces on slip critical connections do not often meet the intended tension, as it considerably varies due to torque coefficient dependent on temperature variables despite the break of the pin tail. In this study, the tension of torque shear bolts were compared with two types of high-strength hexagon bolts by temperature parameters from ${-10^{\circ}C}$ to ${50^{\circ}C}$. Torque shear bolts showed that the average clamping force increased to 20kN as the temperature increased. In case of galvanized high-strength hexagon bolts, the average clamping forces at $0^{\circ}C$, $20^{\circ}C$, $50^{\circ}C$ were recorded over standard bolt tension, 178kN, and the worst standard deviation was 50kN. In case of high-strength hexagon bolts, ave rage clamping forces increased as the temperature went up, and the worst standard deviation was 33kN lower than that of galvanized high-strength hexagon bolts. As for the turn-of-the-nut method, at nut rotation of ${90^{\circ}}$, two types of high-strength hexagon bolts did not met the intended design bolt in tension, 162kN.it is neccessary to re-evaluate the range of turn of nut, ${120^{\circ}{\pm}30^{\circ}}$.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.122-129
• /
• 1995

질소 기체의 온도변화에 따른 질소 레이저의 동작 특성을 조사하고 실험에 의해 얻은 E/P값을 이론치와 비교 연구하였다. 이를 위하여 레이저 관의 길이가 200mm이고, 다중 평행판 축전기형 전송 회로 및 질소 기체의 온도 조정 장치로 구성된 질소 레이저를 제작하였다. 반복률 20Hz에서 스파크 갭의 전극 거리 4mm일 때 최대출력을 얻었으며 최적동작 조건은 질소 기체 온도 $30^{\circ}C$, 기체 압력 70torr이었다. 이때의 E/P는 411V/cm.torr이었다. 한편 질소 기체의 온도가 증가함에 따라 최적 동작 조건은 높은 압력 쪽으로 이동하는 경향을 보였고 이때 E/P값은 감소하는 것으로 나타나 이론과 어느 정도 일치함을 알 수 있었다.