• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.599-605
• /
• 2012

It is important to decide traffic opening time for construction plan of epoxy asphalt pavement. For this purpose, strength prediction model of epoxy asphalt concrete is required. In this study, Marshall stability was measured according to temperature and time for making strength properties equation. Strength prediction model was developed using chemical kinetics considering temperature variation. The traffic opening time of epoxy asphalt pavement on bridge deck has been predicted using the developed model. The prediction and actual traffic opening times were different by 17-days, because weathers of year 2009-2011 used in prediction model were different from weather of year 2012. When the prediction model used the actually measured temperatures of pavement, the difference between real opening time and prediction opening time was two days. The correlation analysis result between measured strength and prediction strength revealed that the $R^2$ using accurate temperature of pavement was 0.95. An improved precise prediction result is to be obtained if the prediction model uses accurate temperature data of pavement.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.325-331
• /
• 1990

The most important factors in the cooking process which is a main process in the sausage manufacture are cooking temperature and relative humidity. In order to design energy efficient processes in cooking, accurate data for the process parameters are necessary. Therefore, texture profiles were analysed and weight losses were measured at different process conditions of the forementioned factors and at different sizes of sausage, The prediction model for the sausage cooking time was then developed by the SPSS computer program The models were developed as a function of cooking temperature, relative humidity and the diameter of sausage by analyszing the scattergram. Then the model obtained could predict the values within 2.5% error. The higher temperature and relative humidity are the less changes of weight during sausage cooking. As the results of measuring physical properties, the values of hardness and cohesiveness at different temperatures and humidities were so much changed, while the values of elasticity and chewiness had little differences.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.139-144
• /
• 1996

핵분열 생성물 방출량을 계산하는 모델들에 대한 비교 분석을 위해 GAPCON-THERMAL-2 Revision 2 (GT2R2) 코드를 이용하여 Beyer-Hann , Beyer-Hann with NRC High Burnup Correction, ANS5.4와 Modified ANS5.4 핵분열 생성물 방출 모델들을, RISO-M2-2C 핵연료봉의 실험결과와 비교하였다. Beyer-Hann 모델은 실험결과보다 낮게 예측한반면 ANS5.4 모델은 실험결과 보다 높게 예측하였다. 한편 NRC High Burnup Correction을 한 Beyer-Hann 모델과 Modified ANS5.4 모델은 실험 결과와 비슷한 방출비를 예측하였다. 이러한 결과를 확인하기 위해 국부적인 핵연료 온도와 연소도를 검토한 결과 ANS5.4 모델이 Modified ANS5.4 모델보다 온도와 연소도에 따라 더 민감한 반응을 보이고 있으며, Beyer-Hann 모델은 연소도 영향이 없이 각 온도 영역에서 일정하였고, Beyer-Hann with NRC High Burnup Correction 모델은 20,000MWd/MTU 연소도 이상영역에서 연소도 영향을 보이고 있다.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.253-263
• /
• 2016

Chrysanthemum production would benefit from crop growth simulations, which would support decision-making in crop management. Chrysanthemum is a typical short day plant of which floral initiation and development is sensitive to photoperiod. We developed a model to predict phenological development and leaf appearance of chrysanthemum (cv. Baekseon) using daylength (including civil twilight period), air temperature, and management options like light interruption and ethylene treatment as predictor variables. Chrysanthemum development stage (DVS) was divided into juvenile (DVS=1.0), juvenile to budding (DVS=1.33), and budding to flowering (DVS=2.0) phases for which different strategies and variables were used to predict the development toward the end of each phenophase. The juvenile phase was assumed to be completed at a certain leaf number which was estimated as 15.5 and increased by ethylene application to the mother plant before cutting and the transplanted plant after cutting. After juvenile phase, development rate (DVR) before budding and flowering were calculated from temperature and day length response functions, and budding and flowering were completed when the integrated DVR reached 1.33 and 2.0, respectively. In addition the model assumed that leaf appearance terminates just before budding. This model predicted budding date, flowering date, and leaf appearance with acceptable accuracy and precision not only for the calibration data set but also for the validation data set which are independent of the calibration data set.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.98-104
• /
• 1996

핵분열 생성물 방출량을 계산하는 모델들에 대한 비교 분석을 위해 GAPCON-THERMAL-2 Revision 2 (GT2R2) 코드를 이용하여 Beyer-Hann , Beyer-Hann with NRC High Burnup Correction, ANS5.4와 Modified ANS5.4 핵분열 생성물 방출 모델들을, RISO-M2-2C 핵연료봉의 실험결과와 비교하였다. Beyer-Hann 모델은 실험결과보다 낮게 예측한반면 ANS5.4 모델은 실험결과 보다 높게 예측하였다. 한편 NRC High Burnup Correction을 한 Beyer-Hann 모텔과Modified ANS5.4 모델은 실험 결과와 비슷한 방출비를 예측하였다. 이러한 결과를 확인하기 위해 국부적인 핵연료 온도와 연소도를 검토한 결과 ANS5.4 모델이 .Modified ANS5.4 모델보다 온도와 연소도에 따라 더 민감한 반응을 보이고 있으며, Beyer-Hann 모텔은 연소도 영향이 없이 각 온도 영역에서 일정하였고, Beyer-Hann with NRC High Burnup Correction 모델은 20,000MWd/MTU 연소도 이상영역에서 연소도 영향을 보이고 있다.

• The Korean Journal of Rheology
• /
• v.3 no.1
• /
• pp.56-67
• /
• 1991

압출공정에서 발생하는 전달현상을 이해하기 위하여 싱글-스크류 압출기에서의 비 뉴톤성 유체의 비등온유동에 대한 수치해석을 위한 유한요서법(FEM)을 개발하였다. FEM 은 준-3차원 물리적 모델을 기본으로 하였고 온도분포해석을 위하여 전진방법을 도입하였 다. 본 연구에서 도입한 수치해석적 모델과 더 간단한 준-2차원 모델을 온도분포의 예측에 관하여 초점을 맞추어서 비교 하였다. 압출기의 내부채넬에서 순환유동이 온도분포에 미치 는 영향의 중요성이 강조되었다. 순환유동의 효과를 파악하기 위하여 유한 요소식에서 순환 과 관련된 대류항을 빼도록 유한요소 프로그램을 개조 하였고 개발된 원래의 프로그램과 개 조된 프로그램의 해석을 수행한후 해석결과 중에서 특히 온도분포에 있어서의 차이점을 비 교하였다. 이로부터 간단한 준-2차원 모델은 순환효과를 무시했기 때문에 속도분포의 예측 에서는 별문제가 없으나 온도분포의 예측에 있어서는 크게 잘못될 수 있음을 알수 있다.

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.87-94
• /
• 2003

Construction plan and strength control have limitations in construction production field because it is difficult to predict the form removal strength and development of specified concrete strength. However, we can have reasonable construction plan and strength control if prediction of concrete strength is available. In this study, firstly, the newly proposed strength prediction model with maturity method was compared with the logistic model to test the adaptability. Secondly, the determination of time of form removal was verified through the new strength prediction model. As the results, it is found that investigation of the activation energy that are used to calculate equivalent age is necessary, and new strength prediction model was proved to be more accurate in the strength prediction than logistic model in the early age. Moreover, the use of new model was more reasonable because it has low SSE and high decisive factor. If we adopt new strength prediction model at construction field, we can expect the reduced period of work through the reduced time of form removal.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.5 s.311
• /
• pp.60-67
• /
• 2006

Thermal analysis and prediction of electronic components is required to predict and optimize the reliability of onboard electronic unit employed in space vehicles. This paper introduces a methodology on thermal prediction that uses isothermal PCB model, thermal force model, thermal resistance matrix and superposition principle to calculate electronic devices temperatures undergoing thermal conduction environment. An example is Presented including a prediction result by this method and simulation results performed by commercial program.

• Journal of the Korean Vacuum Society
• /
• v.4 no.1
• /
• pp.26-31
• /
• 1995

본 연구에서는 Co/Si 계에 대한 이온선 혼합실험을 온도와 이온선량을 변수로 하여 실시하였고, Co/Si 계에 대한 상형성 과정을 금속/Si 계에 대한 이온선 혼합시의 비정질상 및 결정상 형성예측 모델(ADF Model)과 초기 결정상 예측 모델(PDF Model)을 이용하여 해석하였다. 이온선 혼합은 80KeV 가속기를 이용하여 상온$-400^{\circ}C$의 온도 범위에서 1.0X1015Ar+/$\extrm{cm}^2$-2.0X1016Ar+/$\textrm{cm}^2$의 이온선량을 변화시키면서 실험하였으며 상분석은 투과전자현미경(TEM)과 X선 회절 분석을 이용하였다. Co/Si 계에서 이온선 혼합시 형성되는 초기 결정상은 Co2Si이며 이온선량의 증가에 따라 CoSi로 상전이하였다. 이러한 실험 결과는 비정질상 및 결정상 형성 예측 모델(ADF model)과 초기 결정상 예측모델(PDF model)의 예측결과와 매우 잘 일치하고 있다. 이상의 연구 결과로부터 ADF 모델과 PDF모델을 이용하여 박막에서 형성되는 상을 보다 정확히 예측할 수 있음을 알 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.643-648
• /
• 1993

A simple approximate model using equivalent time at a reference temperature ($t_{eq}$) was derived to predict quality changes caused by temperature fluctuations. The validity and effectiveness of this model have been assessed with experimental data of sucrose hydrolysis. Kinetic parameters of sucrose hydrolysis were estimated by one step method using equivalent time at a reference temperature with linearly increasing temperature profile. Sucrose hydrolysis was a first order reaction, and the activation energy was 25.84 kcal/mol. The extent of sucrose hydrolysis of liquid model system under accelerated test with sinusoidal temperature fluctuations were determined. The proposed model yielded accurate prediction with the correlation coefficient in the range of $0.92{\sim}0.99$.