• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2609-2614
• /
• 2010

Temperature compensation circuit is implemented by using the temperature sensor, and Intermodulation (IM) Specification of Power Amplifier is satisfied in the temperature range of $-30^{\circ}C{\sim}60^{\circ}C$ with this temperature compensation circuit. The output voltage of temperature compensation circuit which vary 170mV with the temperature is applied to the gate of TR in 3W output power Amplifier. As the result, right 3rd IM component is -18.5~-26dBm, left 3rd IM component is -18.5~-35dBm, and the left and right 5th IM component is -24~-26dBm in the temperature range of $-30^{\circ}C{\sim}60^{\circ}C$. It is confirmed that IM specification of power amplifier which is under -17dBm in the whole temperature range is satisfied.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.36-42
• /
• 2007

In this paper, we have studied temperature compensation architecture for a bust mode optical transmitter to convert the electric burst mode date signal to a optical one through the laser diode. In order to get stable high speed data transmission, we used digital sampling technique with a microprocessor for the temperature compensation of the laser diode, not the previous real time analog technique. Though the digital automatic power control circuit should be complemented the previous analog one with accuracy and effectiveness. So the digital technique will be more effective in further future in development for the over Gb/s transmitting speed.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.11
• /
• pp.82-87
• /
• 1999

To temperature-compensate the Bragg wavelength of fiber grating filters two materials with different thermal expansion coefficients were depolyed for packaging. After temperature-compensation packaging the maximum difference of the Bragg wavelength in the temperature range of $-10^{\circ}C$ to $70^{\circ}C$ was 0.03nm, which is only about one thirtiety of the Bragg wavelength shift of the temperature-uncompensated fiber grating filter.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.332-333
• /
• 2003

Optical Add／Drop Multiplexer (OADM)은 WDM, 즉 파장분할을 이용하여 보다 많은 정보를 보다 빠르게 전송할 수 있는 광통신 시스템에서 가장 중요한 소자 중의 하나이다. WDM (특히, DWDM) 시스템에서는 광신호의 전송 대역이 파장 영역에서 0.8 nm 정도의 매우 좁은 간격으로 배치되기 때문에, 파장 가감을 위한 광필터들은 높은 파장 정확성과 환경적 조건에 대한 안정성을 가져야만 한다. 그러나 광섬유 단주기 격자의 온도 의존성은 일반적으로 0.01 nm／$^{\circ}C$ 정도로 너무 크기 때문에 WDM 시스템에서 응용되기 위해서는 패키징을 통한 온도 보상이 필요하다. (중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.673-675
• /
• 2011

본 논문은 GHz 대역 소자 응용을 위한 프로그램 가능 보상 회로를 제안한다. 이러한 회로는 5.2GHz대에서 동작하는 고주파 회로의 칩 제작과정에서 예기치 않게 발생한 미세한 PVT (공정, 전압, 온도) 변동을 검출하여 미세 변동된 회로 성능 변수들을 자동으로 보상한다. 자동으로 보상 가능한 고주파 회로 성능 변수들은 중요한 요소인 입력 임피던스, 전압이득과 잡음지수를 포함한다. 이러한 회로는 미세 변동을 자동으로 보상할 수 있도록 고주파 신호를 직류 신호로 변환하는 DFT (Design-for-Testability) 회로를 포함한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.1-10
• /
• 2005

In this paper, we proposed predistortion algerian that can compensate temperature distortion by digital. Predistortion algorithm produces compensation value of distortion by temperature as well as system nonlinear distortion by input level, and warps beforehand signal of baseband. To prove excellency of such algorithm we applied predistortion algorithm to Saleh's high power amplifier model, and did computer simulation. As a result, P1dB increased about 0.5 dBm phase shift reduced about $0.8^{o}$ than existent the A&P PD, and predistiortion algorithm to apply temperature compensation techniques improved P1dB about 2dBm and stabilized phase shift by about $0.1^{o}$ low. When approved UMTS's sample signal to this amplifier, IMD3 of amplifier decreased 10dBm than is no temperature compensation techniques, and reduced 19dBm than signal that is no distortion.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.718-721
• /
• 2010

본 논문은 고주파 시스템-온-칩 응용을 위한 자동 보상 시스템을 제안한다. 이러한 시스템은 고주파 회로 칩 제작과정에서 예기치 않게 발생한 미세한 PVT(공정, 전압, 온도) 변동으로 인한 회로 성능 변수들의 미세변동을 검출하여 이를 자동으로 보상한다. 자동으로 보상 가능한 고주파 회로 성능 변수들은 중요한 요소인 입력 임피던스, 전압이득 및 잡음지수를 포함한다. 이러한 시스템은 미세 변동을 자동으로 보상할 수 있도록 고주파 신호를 직류 신호로 변환하는 DFT(Design-for-Testability) 회로를 포함한다.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.269-272
• /
• 2001

실리콘 마이크로머시닝 기술과 바이폴라 공정으로 집적화된 압력센서를 제작하고 동작특성 평가를 수행하였다. 센서부 보상파라미터를 추출하였고 트리밍 공정을 통하여 출력전압의 보상을 수행하였다. 센서 특성은 압저항 위치, 마스크 정렬 오차, 다이어프램 정밀두께제어 정도, 보호막의 과도식각 정도 등에 의하여 민감하게 좌우됨을 알 수 있었다. 웨이퍼별 샘플추출을 통하여 센서부 감도는 평균 0.653mV/kPa, 감도의 온도계수는 -2078.8ppm/℃, 옵셋 전압은 30.78mV, 옵셋전압의 온도계수는 32.11㎶/℃로 측정되었다. 추출된 샘플의 다이어프램 두께오차는 27±2.5㎛였다. 센서부 특성평가 결과를 통하여 신호처리회로의 옵셋 및 스팬보상, 온도보상을 위한 트리밍 공정을 수행한 결과 개발사양을 만족하는 결과를 얻을 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2407-2414
• /
• 1992

Constant temperature hot wire air flow meter for automobiles requires temperature compensation system because hot wire output signal is sensitive to ambient temperature variations as well as fluid velocity. The objectives of the present study are to design an air flow meter circuit which is capable of compensating the hot wire output signal for ambient temperature variations and to investigate the mechanism of such temperature compensation. This circuit is composed of platinum hot wire, platinum resistor, two variable resistors, a constant resistor and a DC-amplifier. In particular, by simply replacing a constant resistor in one of the bridge arms of the conventional circuit with platinum resistor and a variable resistor for the purpose of temperature compensation, the deviation of output signal with respect to ambient temperature variations between 27deg. C 70deg. C could be reduced to less than 2.5% for mass flow rate and to less than 5% for velocity respectively. The mechanism of temperature compensation against ambient temperature variations was explained by means of measuring the heat transfer coefficient with hot wire temperature variations and analyzing and analyzing conventional empirical equations qualitatively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.129-133
• /
• 2020

In this paper, a temperature compensation circuit is presented in order to mitigate gain variability due to temperature in the W-band low-noise amplifier (LNA). The proposed cascode temperature compensation bias circuit automatically controls gate bias voltages of the common-source LNA in order to suppress variations of small-signal gain. The designed circuit was realized in a 100-nm GaAs pHEMT process. The simulated voltage gain of W-band LNA including the proposed bias circuit is >20 dB with gain variability less than ±0.8 dB in the range of temperatures between -35 to 71℃. We expect that the proposed circuit contributes to millimeter-wave receivers for stable performances in radar applications.