• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.21-21
• /
• 2003

Pb(Zn/sub 1/3/Nb/sub 2/3/)O₃(PZN)은 전형적인 완화형 강유전체로서 급격하게 상전이를 일으키는 것이 아니라 온도에 따라 완만하게 변화하는 물질이다. 완화형 강유전체의 경우, 저온에서는 ㎛ 이상의 거시분역이 존재하고 일반적인 강유전체와 유사한 특성을 가지지만, 온도가 증가하면서 거시분역이 불안정해 지고 크기가 자가져서 수 nm 크기의 미소 극성 영역으로 나뉘는데, 이때 결정구조, 유전율, 유전 손실등의 온도와 주파수에 따른 변화를 관찰하여 강유전 상전이 현상의 특징을 살펴보고자 하였다. 이를 위해 본 연구에서는 융제법에 의해 PZN-xPT 단결정을 성장시킨 후 온도에 따른 결정구조를 변화를 측정하고, 이러한 결정구조의 변화가 강유전 특성에 미치는 영향에 대해 알아보았다. 순수한 PZN은 전형적인 완화형 강유전체의 상전이거동을 나타내었으며, PT의 함량이 증가하면서 점차 일반적인 강유전체로 전이하는 것이 관찰되었다. 그러나 PZN-0.12PT의 경우도 완전한 일반적 강유전체는 아니었으며 완화형거동을 일부 나타내었다. 모든 조성에서 온도가 감소하면서 국부적인 응력의 증가가 관찰되었으며, 응력의 인가 정도는 H 함량에 따라 증가하였다. 이상의 변화는 순수한 PEW에서 나타나는 미소분역들이 온도의 감소와 H 양의 증가에 따라 정전기적 상호작용을 일으키면서 강유전분역으로 성장하기 때문이었으며, Vogel-fulture식에 따른 유전율 최대온도와 측정주파수간의 관계는 분역들간의 상호작용을 됫받침해주었다.

• Journal of Climate Change Research
• /
• v.6 no.3
• /
• pp.209-221
• /
• 2015

Temperature is one of the most important factors affecting crop growth. The diurnal cycle of the scale factor [Tsc] for air temperature and the surface temperature of crop leaf and soil could be estimated by the following equation : $[Tsc]=0.5{\times}sin(X+C)+0.5$. The daily air temperature (E[Ti]) according to the E&E time [X] can be estimated by following equation using average (Tavg), maximum (Tm) and minimum (Tn) temperature : $E[Ti]=Tn+(Tm-Tn){\times}[0.5{\times}sin\;\{X+(9.646Tavg+703.65)\}+0.5]$. The crop leaf temperature in 24th June 2014 was high as the order of red pepper without mulching > red pepper with mulching > soybean under drought > soybean with irrigation > Chinese cabbage. The case in estimating crop leaf surface temperature using air temperature and soil surface temperature was lower in the deviation compared to the case using air temperature for Chinese cabbage and red pepper. These results can be utilized for the crop models as input data with estimation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.1
• /
• pp.18-27
• /
• 2009

The purpose of this study is to understand the scale of temperature change following large-scale urban developments in paddy fields to present possible measures to preserve suburban area paddy fields and to lower the scale of temperature increase after developing paddy fields in urban areas. The study was conducted in Bupyeong and Bucheon of Incheon Metropolitan City. The satellite image($1989{\sim}2000$) before and after the development of old paddy fields were used to analyze the land surface temperature changes according to the land use types. Building coverage, green coverage, non-permeable pavement coverage, and floor area ratio(FAR) were selected as the factors that influence urban temperature changes and the temperature estimation model was constructed by using correlation and regression analyses. The before and after satellite images of Bupyeong and Bucheon were classified into forests, greens and plantations, paddy fields, unused lands, and urban areas. The results indicate that most of the paddy fields that existed in the center of Bupyeong and Bucheon were converted into unused lands which were undergoing construction to become new urban areas. The difference between the surface temperatures of May 17th, 1989 and May 7th, 2000 was analyzed to reveal that most land converted from paddy fields to unused lands or urban areas saw an increase in surface temperature. Han River was used as a comparison to analyze the average surface temperature changes($1989{\sim}2000$) in former paddy fields. The scale of temperature changes were: $+1.6697^{\circ}C$ in urban parks; $+2.5503^{\circ}C$ in residential zones; $+2.9479^{\circ}C$ on public lands, $+3.0385^{\circ}C$ in commercial zones, and $+3.1803^{\circ}C$ in educational zones. The correlation between building coverage, green coverage, non-permeable pavement coverage, or floor area ratio(FAR) and surface temperature increases was also analyzed. The green coverage to temperature increases, but building coverage, non-permeable pavement coverage, and floor area ratio(FAR) had no statistically significant temperature increases. The factors that influence urban temperature changes were set up as independent variables and the surface temperature changes as dependent variables to construct a surface temperature change model for the land use types of former paddy fields. As a result of regression analysis, green coverage was selected as the most significant independent variable. According to regression analysis, if farmland is converted into an urban area, a temperature increase of $+3.889^{\circ}C$ is anticipated with 0% green coverage. The temperature saw a decrease of $-0.43^{\circ}C$ with every 10% increase of green coverage.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.969-972
• /
• 2008

This study investigated the effect of the fundamental condition such as release agent, form conditions and types to the surface of concrete with aluminum form on the various temperatures. On the observation with the naked eyes, coated plywood and aluminum form without a scratch showed similar result, and the surface quality of the concrete with aluminum form was gradually decreased corresponding to the increase of the temperature.For the surface roughness, there is no remarkable tendency according to the temperature. However, the difference in accordance with release agent occurred.As void on the surface corresponding to the various temperature, the micro voids ranged $0.1{\sim}1mm$ were increased corresponding to the increasing temperature, so it was confirmed that the chemical reaction wae accelerated. And the voids of the other range also increased. the fundamental condition such as release agent, form conditions and types

• Journal of the KSME
• /
• v.32 no.6
• /
• pp.514-523
• /
• 1992

스트레인 게이지를 이용하여 변형측정을 할 때 온도변화의 영향으로 나타나는 겉보기 변형도와 게이지 상수의 변화에 대하여 설명하였고 실제 측정시 정확한 측정값을 얻기위한 온도보상 방 법에 대하여 기술하였다. 온도변화에 의한 겉보기 변형도의 값은 기계적 하중에 의한 변형도에 비하여 무시할 수 없는 큰 값을 나타내기 때문에 적절한 보상에 의하여 정확한 측정값을 얻어 내야 한다. 항공우주산업, 원자력산업 등의 분야에서 널리 응용되는 극저온 환경에서 겉보기 변 형도와 게이지 상수의 측정결과를 제시하였다. 극저온에서는 자체 온도보상된 스트레인 게이지라 할지라도 대단히 큰 온도영향을 받기 때문에 본시험에서 제시한 바와 같이 측정결과를 온도보 상하여 처리해야만 의미있는 결과를 얻을 수 있다. 본 시험에서 4차식으로 구해진 겉보기 변형 도에 대한 특성곡선과 게이지 상수에 대한 시험결과는 극저온에서 변형을 측정할 때 직접적으로 보상하여 사용될 수 있다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.12-13
• /
• 2000

광섬유형 센서는 전자기 간섭에 강하고 높은 감도와 원거리측정 등의 장점이 있어 이에 대한 연구가 활발하게 진행되고 있다. 온도센서의 경우 다양한 구조의 센서 구현이 용이하고 넓은 온도범위에서의 측정이 가능하다. 하지만 이러한 광섬유형센서는 대부분 온도변화를 물리량의 변화로 감지하기 때문에 작은 온도의 감지에는 구조적인 한계를 가지는 경우가 많으며 이러한 문제점을 개선하기 위하여 많은 연구가 시도되고 있다$^{[1]}$ . 본 논문은 이러한 점을 인지한 측면연마된 광섬유와 평면도파로 결합기형 고감도 온도센서에 관한 연구이다. 본 연구에서는 온도의 감지를 열광학 평면도파로의 열광학계수에 의존하기 때문에 물질의 변화에 따라 다양한 온도감도 조절과 높은 분해능을 가지는 센서의 구현이 가능하다. (중략)

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.187-188
• /
• 2018

본 논문에서는 영구자석 동기 전동기의 온도 변화를 인공신경망을 통해 예측 및 추정하는 방법을 제시한다. 고정자와 회전자의 온도와 속도, 토크를 입력으로 하여 다음 샘플링 주기까지의 온도 변화를 출력하는 인공 신경망이 제시되었다. 여러 운전점에서 수집된 온도 데이터를 사용하여 훈련된 신경망은 임의의 온도를 시작 온도로 설정하고 출력인 온도 변화를 적분하여 현재의 온도를 추정한다. 제시된 방식은 시뮬레이션을 통해 검증되었고 훈련에 사용되지 않았던 운전경로에 대해 항상 $2^{\circ}C$ 이하의 추정 오차 성능을 보였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1376-1385
• /
• 2000

The phase characteristic of delay line in feedfarward linearizer has been changed due to variation of operating temperature. In this paper, design method of fixed phase control circuit of group delay line using adaptive vector control is derived. To maintain transfer characteristics of nominal operating temperature, the error correlated signals, which are changed adaptively due to changing of temperature, are added to main signals. The proposed method maintains transfer characteristics under 0.06dB of insertion loss and 0.36$^{\circ}$ of phase variation in case of 1-tone(880 MHz) and under 0.07 dB of insertion loss and 0.35$^{\circ}$ of phase variation in case of 2-tones(877 MHz, 882 MHz) for 10dB input power dynamic range and +/-10$^{\circ}$ phase variation respectively.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.4 s.34
• /
• pp.59-65
• /
• 2005

It is very important to detect land cover/land use change from the past and to use it for future urban plan. This paper investigated the application of Landsat satellite imagery for detecting urban growth and assessing its impact on surface temperature in the region. Land cover/land use change detection was carried out by using 30m resolution Landsat satellite images and hierarchial approach was introduced to detect more detail change on the changing area through high resolution aerial photos. Also, surface temperature according to land cover/land use was calculated from Landsat TM thermal infrared data and compared with real temperature to analyze the relationship between urban expansion and surface temperature. As a result, the urban expansion has raised surface radiant temperature in the urbanized area. The method using remote sensing data based on GIS was found to be effective in monitoring and analysing urban growth and in evaluating urbanization impact on surface temperature.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.67-74
• /
• 2008

This paper provides the test results of bonding behavior of the interface between concrete substrate and carbon fiber in the rehabilitation method applying carbon fiber with epoxy based resin adhesive. The difference in each components was gradually increased subjected to the repetition of temperature variation, regardless of the strength of the substrate concrete, while the ultrasonic interface between each component occurred. An increase in difference of the temperature resulted in a decrease in bond strength of each component. Associated failure mode was shown to be interfacial failure and substrate concrete failure. No remarkable changes were found in the deformation and ultrasonic velocity of each component until the four cycles of the dry and moisture test. Hence, the moisture condition may not affect the bonding behavior of each component. After the repetition of dry and moisture test, corresponding bond strength was reduced to 40% of that before test. For the effect of freeze and thaw test, the cycle of freeze and thaw within 4 cycles resulted in debonding of each component.