• Journal of Cadastre & Land InformatiX
• /
• v.52 no.1
• /
• pp.5-16
• /
• 2022

Based on the general formula for the area error of a polygon and rectangular parcel, the constant term 0.026² × M (scale denominator) of the area error calculation formula prescribed by the Enforcement Decree was analyzed. As a result, it is found that the formula appropriately reflects the characteristics of the graphical surveying as a typical rectangular parcel model, but quantitatively allows a relatively large area error. In addition, it is found that, even if the area is the same, 50% more area error than a square parcel could be calculated depending on the shape of the parcel, and that the allowable area error should be different when dividing a parcel. Based on the analysis, furthermore, this study shows a solution that can solve the problems at once from the point of cadastral surveying. These are, the problem of reflecting the accuracy of the surveying, the problem of reflecting the size and shape of the parcel, and the problem whether a single area error formula can be used without having to distinguish between graphical and numerical surveyings. The new formula that solves these problems will bring about improvements in many related factors and promote the development of digital cadastral system.

• Korean Journal of Organic Agriculture
• /
• v.32 no.1
• /
• pp.75-90
• /
• 2024

Biochar is a solid substance with a high carbon content, as it is made out of biomass pyrolyzed under the condition of limited oxygen. This product has attracted attention as an environment-friendly soil amendment because it contributes to carbon neutrally and has improvement effects on the soil environment. This study conducted an experiment to evaluate soil physiochemical properties and microbial community changes in a melon greenhouse according to the applied amount of biochar to investigate the growth characteristics and yields of melons accordingly. In soil physical properties, an increase in the applied amount of biochar resulted in a decrease in bulk density and an increase in porosity of the soil, improving air permeability. In soil chemical properties, an increase in the applied amount of biochar led to a increasing of pH, organic matter and available phosphate content. In the growth characteristics of melons, there was a growing tendency of plant height, leaf length and leaf width according to the increasing application of biochar until 10,000 kg/ha. Moreover, melon yields also increased as the amount of biochar, 13~16% higher in 10,000 kg/ha biochar application than no treatment. Compared differences among microbial communities in the soil according to the application of biochar and found that plant beneficial bacteria dominated in biochar treatments. This study demonstrated the potential of biochar as an effective soil amendment in melon greenhouse by showing improvements in soil physicochemical properties and microbial communities.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.281-282
• /
• 2016

영구자석 동기전동기의 회전자 위치검출센서를 사용하지 않는 센서리스 제어를 위해서는 모터에 인가되는 전압과 전류를 정확하게 알아야 한다. 일반적으로 영구자석동기전동기 모델기반의 회전자 위치검출 관측기에 사용되는 전압은 전류제어기의 출력인 전압지령 값을 사용한다. 그러나 전압지령 값은 인버터에 사용되는 데드타임의 영향으로 인해 실제 모터에 인가되는 전압과 차이를 갖는다. 특히 고속운전 시 과변조 구간에서의 전압지령 값은 실제 모터에 인가되는 전압과 큰 오차를 갖게 된다. 데드타임에 의한 전압 오차는 회전자 위치검출 오차에 미치는 영향이 비교적 작게 나타나지만, 과변조 구간에서의 전압 오차는 회전자 위치검출 오차를 매우 크게 만들어 센서리스 제어를 불가능하게 만들 수 있다. 본 논문에서는 추가적인 전압검출회로를 사용하여 모터에 인가되는 3상 전압을 검출하여 회전자 위치검출 관측기에 적용함으로써 과변조 구간까지 센서리스 제어 범위를 확장하는 방법을 시뮬레이션을 통하여 타당성을 검증하였다.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.38-43
• /
• 2002

Simple principles of self-imaging in Multi-Mode Interference (MMI) devices are based on the approximation of propagation constants. The analysis of the basic nature of the self-imaging principle reveals the problems of previous optimization methods, and provides a new scheme to optimize the external variables for the reconciliation of approximation problems by considering two different tendencies of approximation effects. Furthermore, the representative mode method is proposed to make the application easy. This optimization method provides an essential method for stable design and fabrication of MMI devices with improved characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.168-177
• /
• 2003

The performance sensitivity analysis due to manufacturing/alignment errors is performed for the Ku-band offset parabola antenna of the domestic Communications and Broadcasting Satellite. The performance variations due to reflector random surface error, which inevitably happens during reflector manufacturing, are statistically analyzed using RMS error and correlation interval. The impact on the antenna performance of the fred hem's position and angular errors is investigated, and the sensitive directions are identified. When the target tolerances are applied, the performance degradations are found to be within the loss budget or corresponding performance margins.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.4
• /
• pp.387-397
• /
• 1992

The spatial domain design of 2-dimensional separable denominator digital filters(SDDF) based on the reduced dimensional decomposition can be realized when the given 2-D impulse response specifications are decomposed into a pair of 1-D specifications via singular value decompositions(SVD). Because of use of the balaned approximation and equivalent transform as 1-D design algorithm, 2-D design algorithm retains the advantage that is numerically stable and can minimize quantization errors. In this paper in order to analyze and reduce these errors, minimum comfficient quantization realization is directly derived from impulse response specification. And using the equivalent trans form relation between mininum coefficient quantization error and minimum roundoff error realizations, we optimally realize a SDDF. This algorithm is analyzed by the simulation, which shows that it is superior to direct or balanced realization in quantization errors.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.182-188
• /
• 2002

We have analyzed the phase-calculation-error of a three-dimensional shape measurement system using the projection of phase shifted fringe patterns. In this study, we have dealt various errors; an error caused by the variation of quantization levels, an error caused by the defocus of fringe pattern projected images, an error caused by phase-shifting errors, an error caused by the intensity variation of the background and modulation amplitude of fringe pattern projected images during the projection of multiple patterns, an error caused by the distortion of sinusoidal shape of a fringe pattern. The results will contribute to the design of a three-dimensional shape measurment system and give an important meaning to the calculation and the analysis of the accuracy of a system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.74-83
• /
• 2011

For launcher applications, different from other applications, very high flow rate is required which can lead to supply pressure drop against required setting pressure. The supply pressure decrease is closely related to regulator characteristics. In this paper, supply pressure offset is investigated considering regulators as kinds of control systems. Pressure offset of self-operated regulator is analyzed with sensitive parameter defined as the ratio of valve travel to pressure offset. It is shown that pressure offset of self-operating regulator can be improved by incorporating proportional and integral controls and they can be materialized with pilot regulator systems.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.8
• /
• pp.48-53
• /
• 1999

This paper presents an analytic derivation of the erroneous effect when the sliding-DFT is implemented in a recursive way with the finite-bit approximation of the twiddle factors. The analysis result is obtained in a closed form equation of the noise-to-signal power ratio(NSR) employing the zero-mean white Gaussian signal as the target input of the DFT. The parameters of the wordlength used in representing the twiddle factors and the blocklength of the DFT appear in the NSR explicitly as its function variables. The derivation is based on the error dynamic equation which is derived from the recursive SDFT, and on the analytic exploration of the statistical characteristics of the approximation coefficients treating them as random variables of having spatial distributions. The analytically derived results are verified through the comparison with the data actually measured from the computer simulation experiment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.31-36
• /
• 2014

A study on the indoor positioning system has been active recently for the location based service indoors. In the 3 dimensional positioning system based on the acoustic signal and TDOA technology, the error characteristics of the estimated source position would be changed depending on the number of microphones and the pattern of the microphone array. In this paper, the estimated position error according to the measured distance error between the microphones and the signal source is analyzed, and the optimum microphone array is decided considering the estimated position error patterns and the total amount of the estimated position error.