• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.62-72
• /
• 2015

Nowadays the issue of aging society has received considerable critical attention, especially in transportation planning and demand forecasting. This study identified the factors related to travel time budget for elderly by purpose using seemingly unrelated regression model (SUR model). The SUR model is suitable when error terms of each equation are assumed to be correlated across the equations in terms of travel time budget which is constant in 2 hours per day commonly. The results showed that elderly's travel time budget was affected by individual, household, urban facility and transportation service. The leisure travel comprised a large proportion of total travel time and had a positive relationship with elderly, sports, religious facilities. Moreover, the elderly who had low income or unemployed person had low frequency of social activity such as leisure, shopping and business. This study can provide a comprehensive implications of forecasting the future travel demand and analyzing the travel behavior.

• The Journal of Engineering Geology
• /
• v.3 no.3
• /
• pp.231-239
• /
• 1993

This paper presents a result on the determination of velocity distribution by a tomographic inversion of crosshole seismic traveltimes in transversely isotropic(aniso tropic) media. The crosshole traveltimes used in this study are synthetic ones computed by ray tracing for some models having isotropic and transversely isotropic velocity distributions. The traveltimes are inverted by a general ART and ansotropic ART which considers the transversely isotropic effect during inver sion. The aniotropic ART gives accurate velodty distributions of transversely isotropic and isotropic models, while the isotropic ART determines accurate velocities only for the isotropic model but inaccurate for the transversely isotropic one. Therefore, the anisotropic ART may be used in case where no information is known on the isotropy or transverse isotropy of a survey area.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.1029-1037
• /
• 2004

High-speed/precision servomechanisms have been widely used in the manufacturing and semiconductor industries. In order to ensure the required high-speed and high-precision specifications in servomechanisms, an integrated design methodology is required, where the interactions between mechanical and electrical subsystems will have to be considered simultaneously. For the first step of the integrated design process, it is necessary to obtain not only strict mathematical models of separate subsystems but also formulation of an integrated design problem. A two-degree-of-freedom controller described in the discrete-time domain is considered as an electrical subsystem in this paper. An accurate identification process of the mechanical subsystem is conducted to verify the obtained mathematical model. Mechanical and electrical constraints render the integrated design problem accurate. Analysis of the system performance according to design and operating parameters is conducted for better understanding of the dynamic behavior and interactions of the servomechanism. Experiments are performed to verify the validity of the integrated design problem in the x-Y positioning system.

• Explosives and Blasting
• /
• v.18 no.2
• /
• pp.14-22
• /
• 2000

The estimation of proper prediction method and the alteration of transformation method of environmental regulation standard were carried out by measuring blasting noise in construction field. The correlation of scaled distance with sound pressure level were better than with sound level, but it was proved to be difficult to control blasting noise because the correlation factor was too 1ow. three methods to transform sound pressure levee to sound level were examined. The method is the transformation by correlation equation of sound pressure level and sound level which are measured at the same time, and simplified transformation of A-weighting network corresponding to dominant frequency, and the transformation of sound pressure level by FFT. There were many errors to transform. The best effective method is the transformation using correlation equation of sound pressure level and sound level which are measured at the same time.

• Tunnel and Underground Space
• /
• v.11 no.1
• /
• pp.14-19
• /
• 2001

The estimation of proper prediction method and the transformation method of environmental regulation standard were carried out by measuring blasting vibration. Vibration velocity was more adequate than vibration level in the blasting design by scaled distance. Thus, design and construction mutt be controlled by vibration velocity, and it is required that the vibration velocity is transformed to vibration level to meet regulation standard. Three transformation methods were studied. First, transformation formula is derived from the shock vibration data only. The second method it the transformation by correlation equation of vibration velocity and vibration level measured at the same time. The last one is the transformation of vibration velocity by FFT. It seems to be difficult to estimate damages by these methods because that every method shows considerable error. But transformation formula of PPV component to vibration level was most practical.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1900-1904
• /
• 2007

지금까지 수공구조물의 설계와 기존 시설의 안전도를 평가시 수문, 수리 및 경제학적 함수들에서 발생하는 불확실성을 설명하기 위하여 안전율 또는 여유고를 증가시키거나 이들 정보의 양과 질을 증가시켜 데이터베이스를 확장하고 측정오차를 최소화시키며, 전통적인 통계해석을 적용하였다. 공공의 안전을 확보하기 위하여 설계과정에 안전율 또는 여유고가 도입되었으나 이것은 단순히 보다 높은 재현기간의 적용을 의미하며, 수문현상이 가지는 추계학적 특성보다 확정론적인 근거로부터 안전설계 개념이 개발되었다. 수자원 계획시 고려되는 부하와 저항은 확정론적인 고정치가 아니라 시간에 따라 변하고 동적이며, 무작위적이므로 확률 변수로서 고려되어야 한다. 이에 따라 최근 수자원 계획과정에서 불확실성 해석에 의한 위험도 분석 개념이 도입되고 있으며, 특히 이상기후 및 집중호우의 빈발, 급격한 도시화로 인한 유출양상의 변화 등으로 급증하고 있는 훙수피해를 감안할 때 설계빈도의 상향조정과 같은 확정론적인 방법보다는 매개변수 또는 함수의 불확실성을 고려한 위험도 해석의 필요성이 더욱 증대되고 있는 실정이다. 따라서 본 논문에서는 수자원 계획시 입력자료 및 매개변수의 불확실성과 불확실성의 분리를 고려한 홍수량의 산정 및 각 매개변수의 영향을 평가하여 홍수위험도 해석에 있어서 모델 매개변수의 영향 규명과 처리방안을 제시하고자 한다.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.433-438
• /
• 1997

The enhancing effect of n-octanol on the fluorescence intensity of the $Eu^{3+}$-thenoyltrifluoroacetone(TTA) system in the presence of Triton X-100 was studied using spectrofluorometric method. This complex exhibited very intense $Eu^{3+}$ ion fluorescence at 619nm, when optically excited at 345nm. Optimum conditions for the determination of n-octanol have also been investigated. The calibration graph was linear over the range $1{\times}10^{-5}M{\sim}1{\times}10^{-7}M$ and the detection limit for n-octanol is $1{\times}10^{-9}M$. The result obtained in the analysis of the synthetic sample agreed with the known value in the error range and the relative standard deviation was ca. 3.5%.

• Geotechnical Engineering
• /
• v.8 no.2
• /
• pp.81-96
• /
• 1992

This paper dealt with the influence of experimental error generated inevitably during performing experiments on the granular soil behaviour analysis selecting Lade's Single Work-Hardening constitutive model. Several isotropic compression-expansion tests and a series of drained conventional triaxial tests with various confining pressures for Baekma river sands were performed and the values of parameters for the above model were determined using computer program developed for this study based on regression analysis. By finding the range of the upper and lower bound for deviator stress and volumetric strain versus axial strain dependant on the increase and decrease of the standard deviation from mean value of parameters, sensitivities of all the parameters were examined. Practical use of program to determine the parameters and capability to predict the behaviour of granular soil by Lade's Single Work -Hardening model verified.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.33-34
• /
• 2015

The voyage and cargo volume passing through the Arctic route (NSR) have been gradually increased. The ship-ice collision is one of the most biggest factors threatening the safety navigation of ice-going ships. A lot of researchers are trying to reveal the ship-ice collision mechanism. In this study, some tests that a model ship is forced to collide with disk-shaped synthetic ice are carried out in a towing tank. Then, ice floe's motion (velocity and trajectory) is measured by machine vision inspection.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.29-29
• /
• 1997

각광 받는 구조재료인 섬유강화 복합적층재에 대한 기계적 체결 거동은 본질적인 재료의 이방성에 의해서 파단강도가 파단 모우드와 매우 밀접한 관련을 갖는 것으로 알려져 있다. 따라서, 복합적층판 체결부의 정밀 구조 설계에서는 단순화에 따른 오차를 줄이고 정밀해에 의한 설계 및 해석이 요청된다. 특히, 층간응력 성분을 무시할 수 없는 두께를 갖는 복합적층 판의 기계적 체결부 해석이나 실제 구조물의 체결부에서 발생하는 굽힘이나 비틀림과 같은 하중 상태를 묘사하기 위해서도 정밀한 3차원 응력 해석은 필요하다. 하지만, 지금까지 기계적 체결부의 거동에 관한 연구는 층간응력 성분들을 어느정도 무시할 수 있는 얇은 평판에 대한 2차원 응력해석에 주로 국한되어 왔으며, 일부 수행된 체결부에 대한 3차원 응력 해석의 경우 여러 단점을 갖는 3차원 연속체 요소에 의한 유한요소 해석이 수행되었을 뿐이다.본 연구는 층간응력 성분들을 무시할 수 없는 두께를 갖는 복합적층판의 기계적 체결부 해석에 지금까지 사용되어온 3차원 연속체 요소에 의한 유한요소 방법이 갖는 단점들을 개선한 Layerwise 유한요소법을 이용하여 3차원 응력해석을 수행하였다. 특히, 선형상보성원리에 근거한 최적설계 기법을 응용하여, 기계적 체결시 핀과 적층판의 홀 사이에 발생하는 하중 전달 과정을 모사하고, 접촉력에 의한 홀 주위의 복잡하고 국부적인 응력 집중현상을 규명하여본다.