• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.493-496
• /
• 2001

본 논문에서는 선박에서 사용하는 유수 경계면 및 온도 검출기 센싱 모듈을 설계하였다. 설계된 모듈들은 구체적으로 세부분으로 나눌 수 있다. 첫째는 유수 경계면 검출부분이고, 둘째는 온도 건출부분, 셋째는 전체를 제어하는 제어부분으로 나눌 수 있다. 처음으로 유수 경계면 검출부분은 각 물질의 고유한 유전율을 이용하여 설계하였다. 이것을 이용하여 추출된 경계면의 값은 제어부에서 스피커를 통해 사람이 들을 수 있는 신호음으로 나타난다. 두 번째는 온도 검출부분이다. 기름이나, 가스는 온도에 따라 부피가 변하게 된다. 이러한 온도를 측정함으로써 실제 부피를 정확하게 계산할 수 있다. 마지막으로 전체를 제어하는 제어부분이다. 위에서 언급한 것처럼 제어부는 PIC16F84를 사용하여 유수면 경계검출부분과 온도 검출부분을 통합적으로 제어한다. 설계된 모듈들의 결과를 보면 우선 유수 경계면 검출을 오차 $\pm$2mm 내에서 거리 측정이 이루어지며, 온도 검출은 0.2$^{\circ}C$의 정확도를 가지는 성능을 보였다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.1
• /
• pp.57-71
• /
• 2005

Purpose : To evaluate radiation dose and accuracy with TLD and diode detector when treat total skin with electron beam. Materials and Methods : Using Stanford Technique, we treated patient with Mycosis Fungoides. 6 MeV electron beam of LINAC was used and the SSD was 300 cm. Also, acrylic speller(0.8 cm) was used. The patient position was 6 types and the gantry angle was 64, 90 and $116^{\circ}$. The patient's skin dose and the output were detected 5 to 6 times with TLD and diode. Result : The deviations of dose detected with TLD from tumor dose were CA $+\;6\%$, thigh $+\;8\%$, umbilicus $+\;4\%$, calf $-\;8\%$, vertex $-\;74.4\%$, deep axillae $-\;10.2\%$, anus and testis $-\;87\%$, sole $-\;86\%$ and nails shielded with 4mm lead $+4\%$. The deviations of dose detected with diode were $-4.5\%{\sim}+5\%$ at the patient center and $-1.1\%{\sim}+1\%$ at the speller. Conclusion : The deviation of total skin dose was $+\;8\%{\sim}-\;8\%$ and that deviation was within the acceptable range(${\pm}\;10\%$). The boost dose was irradiated for the low dose areas(vertex, anus, sole). The electron beam output detected at the sootier was stable. It is thought that the deviation of dose at patient center detected with diode was induced by detection point and patient position.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.1-7
• /
• 2006

Lattice decoding concept has been proposed for the implementation of the Maximum-Likelihood detection which is the optimal receiver from the viewpoint of the BER (Bit Error Rate) performance for MIMO (Multiple Input Multiple Output) systems. Sphere decoding algorithm and K-best decoding algorithm are based on the lattice decoding concept. A K-best decoding algorithm shows a good BER performance with relatively low complexity. However, with small K value, the error propagation effect severely degrades the performance. In this paper, we propose an adaptive K-best decoding algorithm which has lower average complexity and better BER performance than conventional K-best decoding algorithm.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.309-314
• /
• 1996

가압 경수로형 원전 안전정지/ 안전 주입 변수와 관련된 계기는 관련 기술 기준에 따라 정기 보수시 교정이 이루어지면, 정지 신호를 모의 주입하여 물리량 검출기로 부터 원자로 정지집계 권선의 풀림시간까지의 총 응답 시간이 사고해석시 가정된 계통의 응답 지연시간이내에 들어 있는 지를 확인한다. 이 정지 신호에 응답하는 동적 보상기의 특성과 관련하여 설계과정에서 삽입된 근사화 오차에 대한 정략적인 평가가 이미 알려진 바 있고, 시간 응답 측정시 삽입되는 지연 요소로 인한 오차도 이에 포함시켜 분석한 바 있어 실제 교정시 정밀도 향상을 위하여 활용하고 있다. 이 논문을 통하여 원자로 정지계통의 응답시간 측정시 노 냉각수 평균 온도 변화율 동적 보상 미분-지연 카드에 모의입력으로 스텝신호를 주입할 경우, 이를 과도하게 큰 신호로 인식하여 매우 짧은 시간(1초 이내)에 응답되고, 스텝신호대신 1%P.U./초로 평균온도 변화율만을 주입할 경우, 보다 늦게 응답됨을 밝혔다. 따라서 모의 시험 방범에 있어서 입력 선택을 적합하게 하여야만 계통의 건전성을 응답시간으로 확인한 수 있는 데, 이에 적합한 모의 입력 방법을 제안하였다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.1
• /
• pp.1-4
• /
• 1998

A compact scanning confocal microscope has been constructed using a quad-detector in a CD-player. The variation of error signal on depth which obtained by a quad-detector is used in the scanning confocal microscope. Bipolar error signals, which is sensitive near a focus, give a surface following effect whiout following the surface. In the case of small depth difference, the difference of materials through the reflection signal has been identified. The image which uses reflection signal only, has been obtained with the same setup. And, the results obtained in two different way were compared and analyzed.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.56-62
• /
• 2008

In this study, we have investigated the dose characteristics of PTW-LinaCheck designed to detect output of medical LINAC and discussed clinical use of the detector. The reproducibility, linearity, and dose rate dependency of the dosimeter were measured for photons of 6 and 15MV and the electrons of 4, 6, 9, 12, and 16MeV. To know the error ranges of the measured data in daily output measurement, the response variations due to geometrical setup errors were measured. As a result of measurement, the error range from the geometrical setup and the reproducibility was less than ${\pm}0.6%$ for given beam qualities in daily output measurement, where the errors from the linearity and the dose rate dependency were negligible. Finally, we concluded that the LinaCheck dosimeter has a good characteristics in terms of dose and setup convenience in daily output measurement. In addition we have shown an examples of clinical use of this dosimeter for measuring daily output more than 60 days.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.8-17
• /
• 1999

In this paper, a proposal for improving the performance of IF in-phase combiner is presented in view of simple hardware design and good performance for space diversity application. By adding the stable normalization circuit to the phase detector, better performances are obtained even for a severe notch depth of 30 dB. To check the validity of this proposal, various results based upon numerical simulation and laboratory test are presented here in conjunction with 64-QAM digital radio relay system.

• Journal of the Korean Society of Radiology
• /
• v.14 no.6
• /
• pp.725-731
• /
• 2020

A radiation spectroscopy detector using a spherical scintillator was designed, and a system was developed to track the position of a radiation source using several detectors. The position tracking algorithm was designed based on the theory that the number of radiations decreases according to the inverse square law of distance, and the position of the radiation source was calculated by measuring the number of radiations generated from the radiation sources at various positions. The radiation generated from the radiation source is detected by different coefficients in each detector, and the difference between these detected coefficients varies in proportion to the inverse square of the distance. Geant4 Application for Tomographic Emission (GATE) simulation was performed to verify and evaluate the performance of the designed radiation source position tracking system, and radiation generated from radiation sources placed at different positions was counted with each detector. The number of measured radiations was tracked through the radiation source position tracking algorithm, and the error between the actual radiation source position and the position calculated by the algorithm was evaluated. The error between the position of the actual radiation source and the calculated position was measured as an average of 0.11% on the X-axis and 0.37% on the Y-axis, and it was verified that the position can be measured very accurately.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.705-713
• /
• 2021

The modulation transfer function (MTF) is calculated to analyze the resolution of the spatial frequency of the image acquired from the x-ray imaging system. In general, the response function of the detector acquires a line spread function (LSF) using a slit-camera, and derives a modulation transfer function through a Fourier transform. Because of the fact that the x-ray must always be incident on the center of the slit-camera, the tilt of the detector and slit-camera caused by the experimenter will affect the detector performance. In addition, if the tilt increases, the performance evaluation of the x-ray image system will be problematic. In this study, we analyzed the experimental and analytical models in the modulation transfer function, ie, the Fourier domain, based on the experimental error and analyzed the effect on the spatial frequency. Furthermore, performance evaluation is being carried out for various x-ray imaging systems, and experimental errors are indispensable, and the extent to which they can be tolerated should be reviewed.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.7-13
• /
• 2014

In this paper, an effect on a GPS receiver by spoofing signal is analyzed and a GPS spoofing signal detection algorithm for GPS L1 C/A spoofing signal is proposed. A proposed detection algorithm monitors the correlation function distortion by the spoofing signal. If detected distortion is over a detection threshold, we can determine that the spoofing signal is received. The detection threshold is calculated from the statistical characteristics of a thermal noise. For verifying the suggested algorithm, a MATLAB-based simulation platform is implemented. This platform has functionalities to track GPS signal and measure the correlation values. By using this platform, the correlation function distortion by spoofing signal is observed. Also a performance of the algorithm proposed in this paper is applied and confirm the detection of a spoofing signal.