• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.15-21
• /
• 2020

In this paper, the observation performance of the electro-optical telescope system which surveils the unknown space objects, is analyzed by the Modeling & Simulation(M&S). The operation concept for the observation of the unknown space objects using two telescope systems is considered and the M&S models are constructed. Based on the operation concept for observing the unknown space objects, the estimated orbit is generated by Initial Orbit Determination(IOD) and the observation performance is analyzed according to the offset compensation cycle for the estimated orbit. The result of the M&S based analysis in this paper shows that the observation performance increases with the shorter offset compensation cycle, and decreases with the longer offset compensation cycle. Therefore, to improve the performance of the telescope system which surveils the unknown space objects, the observation system with accurate initial orbit determination or shorter offset compensation cycle should be designed and constructed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.288-288
• /
• 2021

수문 모델링을 이용하여 미계측 유역의 유출을 예측하고 나아가 수문 현상을 이해하기 위해서는 기존과는 다른 새로운 모형 보정 전략과 평가 방법이 필요하다. 위성 관측자료의 가용성 증가는 미계측 유역에서 수문 모형의 예측 성능을 확보할 기회를 제공한다. 유역 내 증발산 과정은 물 순환 과정을 설명하는 주요한 부분 중 하나이다. 또한 식생에 대한 정보는 증발산 과정과 밀접한 연관을 가지기 때문에 간접적으로 유역의 증발산 과정을 이해할 수 있는 중요한 정보이다. 본 연구는 미계측 유역의 하천유량을 예측하기 위해 위성 관측 기반의 식생 정보만을 이용하여 보정된 생태 수문 모형의 잠재력을 조사한다. 이러한 보정 방법은 관측된 하천유량 자료가 있어야 하지 않기에 미계측 유역의 하천유량 예측에 특히 유용할 것이다. 모델링 실험은 관측 하천유량 자료가 존재하는 5개의 댐 유역(남강댐, 안동댐, 합천댐, 임하댐)에 대해 수행되었다. 본 연구에서는 식생동역학이 결합 된 집체형 수문 모델을 이용하였으며, MODIS 잎면적지수(Leaf Area Index, LAI) 자료를 이용하여 모형을 보정하였다. 보정된 모형으로부터 생산된 일 유량 결과는 관측 유량 자료와 비교된다. 또한, 전통적인 관측 유량 기반의 모형 보정 방법과 비교된다. 그 결과 LAI 시계열을 이용한 모형의 보정으로 획득한 유량의 적합도는 남강댐, 안동댐, 합천댐 유역에서 KGE가 임계치 이상으로 나타나 만족스러운 결과를 보여주지만, 임하댐 유역은 KGE가 임계치 이하로 계산되었다. 그러나 해당 유역에 대해 관측 유량을 기반으로 모형 보정 결과 또한 좋지 않은 적합도를 보여주기에 이는 LAI 자료 기반 접근법의 문제가 아닌 입력정보 또는 모형 자체에 포함된 오차로 인해 해당 유역의 특성을 반영하기에 어려운 것으로 판단된다. 이러한 결과는 증발산 과정에 주요한 식생 정보의 제약만으로도 비교적 만족스럽게 유역의 수문 순환을 재현할 수 있다는 가능성을 보여준다.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.1
• /
• pp.80-85
• /
• 1998

본 논문에서는 음성합성기에서 합성음의 자연성을 향상시키기 위한 한 방법으로 운 율 제어요소중 세기 제어 모델을 통계적인 방법을 이용하여 제안하였다. 세기 제어 모델을 구성하기 위하여, 음성의 세기는 피치에 비례한다는 사실에 기반하여, 녹음된 음성 데이터에 서 음절의 각 모음에 대한 평균파워와 평균피치를 구하고, 피치를 종속변수로 하는 모음의 세기 예측식을 만들었다. 예측식에 의하여 얻어진 세기값과 실제 측정된 세기값과의 상관도 는 전체모음에 대하여 약 0.63으로 나타났다. 본 논문에서는 예측 세기와 실제 세기와의 상 관도를 향상시키기 위하여 피치만을 고려하여 예측된 세기값을 음운환경을 고려하여 선형 오차를 보정하는 방법을 제안하였고, 이 방법을 이용하여 얻어진 세기값은 전체모음에 대하 여 실제 세기값과 0.71의 상관도로 향상시킬 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.268-273
• /
• 2008

A linear wind prediction program, WAsP, was employed to predict wind speed at two different sites located in complex terrain in South Korea. The reference data obtained at locations more than 7 kilometers away from the prediction sites were used for prediction. The predictions from the linear model were compared with the measured data at the two prediction sites. Two compensation methods such as a self-prediction error method and a delta ruggedness index (RIX) method were used to improve the wind speed prediction from WAsP and showed a good possibility. The wind speed prediction errors reached within 3.5 % with the self prediction error method, and within 10% with the delta RIX method. The self prediction error method can be used as a compensation method to reduce the wind speed prediction error in WAsP.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.205-210
• /
• 2021

In this study, I studied how to generate input values to achieve the same value as the target value. The general procedures are explained to regenerate the excitation input, which is made by using the frequency response function between input-output. In this study, a mount model connected by a bushing was used as a numerical model. The response value for the excitation input was compared with the target value. The excitation input was corrected to obtain the same response as the target value. Through the iterative process, the reconstructed input value was obtained to have the same response as the test.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.2
• /
• pp.145-154
• /
• 2020

Steel set is a structure that stabilize the NATM tunnel until the installation of shotcrete, and it is combined after the shotcrete is installed to improve stability. In this study, determination approach for the equivalent elastic modulus of shotcrete-lattice girder composite is newly suggested for tunneling simulation. Also, a method was presented to calibrate the equivalent elastic modulus through the comparison of the full 3D model and equivalent model. When the conventional equivalent elastic modulus is used for shotcrete-lattice girder composite, the flexural strength of equivalent model is 130% smaller than that of full 3D model. Equivalent elastic modulus is adjusted considering the error of flexural strength. It is found that the error of flexural strength obtained from adjusted equivalent model using adjusted equivalent elastic modulus is reduced less than 1%.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.4
• /
• pp.9-19
• /
• 2019

As light-weight embedded devices become widely used in the area of low-power networking and high-precision sensor data acquisition, support for time-critical applications becomes essential for the light-weight embedded devices. This paper addresses the accuracy issue of a software timer for small or tiny embedded devices equiped with light-weight MCUs(Micro controller units). We first explore the characteristics of overhead in a typical implementation of a software timer, and then measure the overhead through a realistic implementation. Using the measurement result, we propose an overhead compensation technique which reduces the overhead from the hardware timer-tick.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.5
• /
• pp.593-598
• /
• 2005

The standard Kalman filter has been used to estimate the states of the target, but in the presence of a maneuver, its error is occurred and performance may be seriously degraded. To solve this problem, this paper presents a new intelligent tracking algorithm using the fuzzy Kalman filter. In this algorithm, the unknown acceleration is regarded as an additive process noise by using the fuzzy logic based on genetic algorithm(GA) method. And then, the modified filter is corrected by the new update equation method which is a fuzzy system using the relation between the filter residual and its variation. To shows the feasibility of the suggested method with only one filter, the computer simulations system are provided, this method is compared with multiple model method.

• Geophysics and Geophysical Exploration
• /
• v.22 no.4
• /
• pp.225-238
• /
• 2019

Migration velocity analysis (MVA) for creating optimum depth-domain velocities in seismic imaging was applied to marine long-offset multi-channel data, and the effectiveness of the MVA approach was demonstrated by the combinations of conventional data processing procedures. The time-domain images generated by conventional time-processing scheme has been considered to be sufficient so far for the seismic stratigraphic interpretation. However, when the purpose of the seismic imaging moves to the hydrocarbon exploration, especially in the geologic modeling of the oil and gas play or lead area, drilling prognosis, in-place hydrocarbon volume estimation, the seismic images should be converted into depth domain or depth processing should be applied in the processing phase. CMP-based velocity analysis, which is mainly based on several approximations in the data domain, inherently contains errors and thus has high uncertainties. On the other hand, the MVA provides efficient and somewhat real-scale (in depth) images even if there are no logging data available. In this study, marine long-offset multi-channel seismic data were optimally processed in time domain to establish the most qualified dataset for the usage of the iterative MVA. Then, the depth-domain velocity profile was updated several times and the final velocity-in-depth was used for generating depth images (CRP gather and stack) and compared with the images obtained from the velocity-in-time. From the results, we were able to confirm the depth-domain results are more reasonable than the time-domain results. The spurious local minima, which can be occurred during the implementation of full waveform inversion, can be reduced when the result of MVA is used as an initial velocity model.

• Korean Journal of Remote Sensing
• /
• v.28 no.4
• /
• pp.393-407
• /
• 2012

This study focuses on the correction of topographic effects caused by a combination of solar elevation and azimuth, and topographic relief in single optical remote sensing imagery, and by a combination of changes in position of the sun and topographic relief in comparative analysis of multi-temporal imageries. For the Jeju Island, Republic of Korea, where Mt. Halla and various cinder cones are located, a Landsat 7 ETM+ imagery and ASTER GDEM data were used to normalize the topographic effects on the imagery, using two topographic normalization methods: cosine correction assuming a Lambertian condition and assuming a non-Lambertian c-correction, with kernel sizes of $3{\times}3$, $5{\times}5$, $7{\times}7$, and $9{\times}9$ pixels. The effects of each correction method and kernel size were then evaluated. The c-correction with a kernel size of $7{\times}7$ produced the best result in the case of a land area with various land-cover types. For a land-cover type of forest extracted from an unsupervised classification result using the ISODATA method, the c-correction with a kernel size of $9{\times}9$ produced the best result, and this topographic normalization for a single land cover type yielded better compensation for topographic effects than in the case of an area with various land-cover types. In applying the relative radiometric normalization to topographically normalized three multi-temporal imageries, more invariant spectral reflectance was obtained for infrared bands and the spectral reflectance patterns were preserved in visible bands, compared with un-normalized imageries. The results show that c-correction considering the remaining reflectance energy from adjacent topography or imperfect atmospheric correction yielded superior normalization results than cosine correction. The normalization results were also improved by increasing the kernel size to compensate for vertical and horizontal errors, and for displacement between satellite imagery and ASTER GDEM.