Journal of the Korea Convergence Society (한국융합학회논문지)

Korea Convergence Society (한국융합학회)
권호 표지
DOI QR코드

DOI QR Code

Development of 3-ch. Vibration Generator S/W for Virtual Test

가상시험을 위한 소프트웨어 기반 3채널 가진기 개발

  • Kim, Kwang-Suk (Department of Automotive Engineering, Inha Technical College)
  • 김광석 (인하공업전문대학 자동차과)
  • Received : 2020.12.07
  • Accepted : 2021.01.20
  • Published : 2021.01.28
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, I studied how to generate input values to achieve the same value as the target value. The general procedures are explained to regenerate the excitation input, which is made by using the frequency response function between input-output. In this study, a mount model connected by a bushing was used as a numerical model. The response value for the excitation input was compared with the target value. The excitation input was corrected to obtain the same response as the target value. Through the iterative process, the reconstructed input value was obtained to have the same response as the test.

본 연구에서는 대상 시스템의 목표 값과 동일한 응답 특성을 얻기 위한 가진 입력 데이터의 생성 방법에 대해 연구하였다. 입력-출력 사이의 전달함수인 주파수 응답함수를 사용하여 가진 입력을 재구성하는 방법에 대해 논하였다. 이를 위하여 수치모델로 세 점에서 부싱으로 연결된 엔진 마운트 모델을 사용하였다. 3 방향의 입력에 대한 응답을 시험값과 비교하고, 목표 값과 동일한 응답을 얻을 수 있도록 가진 입력을 보정하였다. 오차함수를 계산한 다음 이 값이 수렴하는지 판단하여 반복 시뮬레이션을 수행하였다. 반복과정을 통해 시험과 동일한 응답을 가질 수 있도록 조정된 가진 입력 값을 얻을 수 있었다.

Keywords

References

  1. Y. S. Garud. (1981). A New Approach to the Evaluation of fatigue under Multiaxial Loadings, Journal of Engineering Materials and Technology, Trans. ASME, 103, 118-125. https://doi.org/10.1115/1.3224982
  2. R. W. Murphy. (1982). Endurance Testing of Heavy Duty Vehicles, SP-506, SAE Paper No.820001.
  3. T. Liu. (1986). Computational Methods for Life Prediction of mechanical Components of Dynamic System, Ph.D. Thesis, The Univ. of Iowa, Iowa City, Iowa.
  4. E. J. Haug, T. S. liu, L. Johnson, W. K. Baek et al. (1986). Progress in Flexible system Dynamics and Vehicle Life Prediction, Technical Report 86-20, The Univ. of Iowa.
  5. W. K. Baek, R. I. Stephens & B. Dopker. (1993). Integrated Durability Analysis, Trans. of the ASME, Journal of Engineerinf for Industry, 115(4), 492-499. https://doi.org/10.1115/1.2901795
  6. W. K. Baek. (1990). Computational Life Prediction Methodology for Mechanical Systems Using Dynamic Simulation, Finite Element Analysis, and Fatigue Life Prediction Methods, Ph.D. Thesis, The Univ. of Iowa, Iowa City, Iowa.
  7. M. K. Kim, K. S. Kim, W. S. Yoo. (1999). Modified Road Profile Generation Using Road-Wheel FRF and Simulation of Dynamic Load Transfer in Vehicle Suspension. SAE 1999-01-0937.
  8. M. K. Kim, K. S. Kim & W. S. Yoo. (1999). Regeneration of Road Profile to Compensate Nonlinearties of Tires. KSAE, 7(8), 199-207.
  9. K. S. Kim. (2017). A Study on Program Development for Static Design Factor of Automotive Suspension System, The Korean Journal of The Korea Convergence Society, 8(12), 283-289. https://doi.org/10.15207/JKCS.2017.8.3.283
  10. Thomas D. Gillespie. (1992). Fundamentals of Vehicle Dnamics, Society of Automotive Engineering.
  11. ISO/TC108/SC2/WG4 N5. (1982). Reporting Vehicle Road Srface Irregularities.
  12. Ingle, Vinay K & Proakis, John G. (2017). Digital Signal Processing Using MATLAB, Cengage Learning.
  13. N. Kehtarnavaz & N. J. Kim. (2013). Digital Signal Processing System-Level Design Using LabVIEW, elsevier.
  14. K. Steiglitz. (2020). A Digital Signal Processing Primer, Dover Publications.
  15. J. S. Bendat & A. G. Piersol. (1986). Random Data : Analysis and Measurement Procedure, John Wiley & Sons, New York.