• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.11a
• /
• pp.130-131
• /
• 2001

페놀류화합물의 경우 오존단독반응에서 보다 오존/과산화수소반응이 더 속도가 느림을 알 수 있었는데 이는 Hoigne 등이 이미 제시한 .OH라디칼반응보다 오히려 ortho위치의 오존삽입반응메카니즘으로 진행됨을 알 수 있으며, 반대로 benzophenone의 경우는 .OH라디칼에 의한 산화반응이 더 잘 진행됨을 볼 수 있었다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.267-268
• /
• 2002

최근의 서울과 인근 수도권지역을 비롯하여 공장이 밀집되어 있는 산업도시나 교통량이 많은 대도시 지역에서 고농도의 오존이 종종 측정되고 있다. 일반적으로 대기중에 VOCs가 존재하지 않을 때 자연적으로 오존은 생성ㆍ소멸을 반복하여 순환하면서 일정한 농도를 유지하지만 오존생성 전구물질인 질소산화물(NOx), 휘발성유기화합물(VOCs)이 자외선을 흡수하여 산화되면서 오존의 농도를 증가시키는 것으로 알려져 있다. (중략)

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.413-416
• /
• 2004

매립장 침출수로 인해 오염된 매립장 주변 지하수 정화를 위한 실내실험을 실시하였다. 오염물로는 대표적 염화용제인 TCE와 PCE, 그리고 중금속인 As, Cd, Cr, Pb에 대하여 Air-sparging, 오존 산화법, 화학적 처리방법에 의한 정화효율 실험을 실시하였다. Air-sparging은 TCE, PCE에서 높은 제거효율을 가졌으며, 오존 산화법은 Cr, Pb에서 제거 효율이 좋았다. 반응제를 첨가한 공침방법의 경우, 모든 중금속에 대하여 소석회 첨가시 매우 높은 제거효율을 보였으며, As는 황산제일철에서, Cd, Cr, Pb는 탄산칼슘과 제올라이트 첨가시 높은 제거효율을 나타내었다. 실험결과로부터, 유기오염물과 중금속이 혼합되어 나타나는 매립장 주변 오염 지하수의 경우 휘발성 유기오염물의 제거를 위해서는 폭기방법이, 중금속의 경우에는 공침방법에 의해 수산화물, 탄산염으로 만들어 고형물로 처리하는 방법이 제거효과가 좋은 것으로 나타났다.

• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.237-241
• /
• 2014

Benzene is a hazardous air pollutant, classified as carcinogenic to humans, that requires special management. Benzene exists both indoors and outdoors and the control measure of indoor benzene is different from that of outdoor benzene. The removal of indoor benzene needs to be accomplished at low temperatures (normally below $100^{\circ}C$), while outdoor benzene is usually removed at much higher temperature ($300-400^{\circ}C$) by using catalytic oxidation. This review paper summarizes the recent trend in catalytic treatment of airborne benzene, focusing on catalytic oxidation and catalytic ozone oxidation. Particular attention is paid to Mn-based catalysts for low-temperature oxidation of benzene, which are more economical than the other noble-metal catalysts. Various methods are used to generate more efficient Mn-based catalysts for benzene removal. Ozone oxidation is attracting particularly significant attention because it can remove benzene effectively below $100^{\circ}C$, even at room temperature.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.463-469
• /
• 2015

Bisphenol A (BPA) in aqueous solution was measured using HPLC technique, which was established by acetonitrile analysis and KDP solution analysis methods. In these experiments the decomposition characteristics of BPA were compared using the ozone alone, ozone/pH 10, and ozone/hydrogen peroxide processes. About 70% of 10 mg/L of BPA was removed during 60 min by the ozone alone process, while 10 mg/L of BPA was completely removed by the ozone/pH 10 and ozone/hydrogen peroxide processes in 40 min and 60 min, respectively. The final decomposition efficiency drawn from results of TOC and HPLC analyses showed that the ozone/hydrogen peroxide process was the best among them, whereas the concentrations of TOC and reaction intermediates when using the ozone/pH 10 process were higher than those of the ozone alone process after 60 min of reaction. The ozone/hydrogen peroxide process was the most efficient among them when oxidizing organic carbons in water to $CO_2$ and $H_2O$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.457-457
• /
• 2014

오존발생방법은 다양한 방식으로 구현이 가능하나 대용량 장치를 만들기 위해서는 DBD (Dielectric barrier discharge) 구조의 형태의 가지고 있다. 이러한, DBD는 반도체의 MOS (Metal On Semiconductor)의 반대 구조를 가진 SOM (Semiconductor On Metal)의 형태를 가지고 있으며 대부분이 Oxidation 산화물을 가지고 구현한다. 오존발생기는 반도체 공정, 환경 및 정화 등 다양한 분야에 사용이 되고 있는 상황으로 성능개선을 위한 연구가 필요한 상황이다. 대표적으로 사용되는 물질인 $SiO_2$를 가지고 있는 상황이며 Silicon은 에너지 Bandgap이 1.1 eV로 금속위에 증착되어 통상적으로 사용되는 문턱전압은 0.7 V에 해당이 된다. 현재 점차적으로 연구가 진행되고 있는 $Al_2O_3$는 8.8 eV의 bandgap을 가지고 있으며 유전 상수가 9로 $SiO_2$인 3.9보다 높은 유전률 특징을 가지고 있다. 따라서, 본 연구는 오존 발생장치에 사용되는 방전관을 기존의 $SiO_2$에서 $Al_2O_3$ 방식으로 대체하므로써 실제적인 유전율의 값의 차이와 오존 발생시 오존변화율 증대에 관하여 연구하였다. $SiO_2$ 방전관은 Fe 메탈위에 약 3 mm정도의 두께를 binding시켜 N4L사의 PSM1700 모델 LCR meter를 사용하여 1.3 kHz시 7.2 pF의 유전율 확인 할 수 있으며 동일한 조건의 금속 메탈위에 $Al_2O_3$를 binding 시켜 측정한 결과 1.07 kHz시 10.7 pF의 유전율을 가지게 되어 40% 이상 높은 유전율을 가지게 되는 것을 확인 할 수 있다. 오존발생을 위하여 가변 주파수형 트랜스 드라이버를 통한 공진 주파수를 생성하여 방전 증폭을 위한 Amplifier를 통하여 변환률을 높이는 방식을 적용하여 MIDAC사의 I1801모델 적외선 분광기(FT-IR)를 통한 오존발생량을 측정하여 기존의 $SiO_2$의 방전관은 시간당 54 g의 오존 발생률 가지게 된다. $Al_2O_3$는 시간당 70 g 정도의 오존 발생률 가지므로 기존의 $SiO_2$ 보다 발생률 높은 것을 확인 할 수 있다.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.4
• /
• pp.273-279
• /
• 2017

Optimal processes to remove chromaticity at E water treatment plant(WTP) mainly caused by algae of E lake in Jeju island were investigated based on lab-tests of chlorine and ozone oxidation. 42.9% of chromaticity of filtered water was removed by chlorine oxidation under pH 7.0~8.0, dose of 1.0 mg/L with contact time of 30~60 min. On the other hand, chromaticity removal was 71.4% when post-ozone dose of 0.9~1.9 mg/L and pH 9.0, while it was increased to 86.7% under post-ozone dose of 3.1~7.3 mg/L and pH 9.0. However, there was no significant chromaticity removal efficiency increase when ozone doses were higher than 5.0 mg/L regardless of feeding point(i.e., pre-ozonation and post-ozonation) and pHs(i.e., 7.0 and 9.0.) under the experimental conditions. Based on the results, chlorine oxidation using existing chlorination facilities at the WTP is recommended for lower chromaticity while ozone oxidation is recommended for higher chromaticity by installing new ozone feeding facilities.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.354-361
• /
• 2008

Effects of operational conditions and solution chemistry on permeate flux in a hybrid ozone-ceramic ultra-filtration (UF) membrane system treating natural organic matter (NOM) were investigated. Results showed that the extent of permeate flux decline was higher at higher cross-flow velocity and ozone dosage, but it was higher at lower transmembrane pressure (TMP). The mechanism of fouling mitigation was found to be more dependent upon reaction between ozone and natural organic matter at/near catalytic membrane surface than scouring effect due to ozone gas bubbles. Addition of calcium into model NOM solution at high pH led to significant decline in permeate flux while the calcium effect on permeate flux decline was less pronounced at lower pH. After permeate flux decline during the early stage of filtration, the flux started recovering and approached fully to the initial value of it due to degradation of NOM by catalytic ozonation at ceramic membrane surface in the hybrid ozone-ceramic membrane system.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.103-111
• /
• 2000

Ozonation and advanced oxidation($H_2O_2/O_3$) process were investigated under various experimental conditions to improve the efficiency of biological filter used for the treatment of recycled wastewater from aquaculture. Ammonia removal followed the first-order reaction whose reaction rate constant(k) was $2.0{\times}10^{-2}min^{-1}$ in ozonation. The ammonia removal rate increased according as the bicarbonate alkalinity is increased. About 46% $NH_3$ was oxidized by ozone at 200 mg/L as $CaCO_3$. When alkalinity existed in wastewater, ammonia removal rate by advanced oxidation was very low due to the inhibition effect of bicarbonate. However, when initial pH was adjusted to about 8.2 by 0.1 N KOH, ammonia removal rate was improved higher than that by ozonation. Especially. ammonia removal rate was the highest at $H_2O_2/O_3$ of 0.25 and about 90% of ammonia was removed in 30 min at this ratio as pH was maintained over 9. In the case of wastewater containing ammonia and organic constituents, ammonia removal efficiency by both ozonation and advanced oxidation decreased seriously because organic constituents consumed the oxidant faster than ammonia. In addition the optimal $H_2O_2/O_3$ ratio was changed. Like ammonia removal, DOC(dissolved organic carbon) increased for first 10 min and then decreased slowly because the particulate organic constituents were oxidized rapidly and then produce DOC. Even when the ammonia concentration by twice, oxidation of DOC was not retarded.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.237-242
• /
• 2021

Simultaneous removal technologies of multi-pollutants such as particulate matters (PMs), NOx, SOx, VOCs and ammonia have received consistent attention due to the enhancement of pollutant abatement efficiency in addition to the stringent environmental regulation and emission standard. Pretreatment of insoluble NO by an ozone oxidation can be considered to be more effective route for saving space occupation as well as operation cost in comparison with that of traditional selective catalytic reduction (SCR) process. Moreover the primary advantage of ozone oxidation process is that the simultaneous removal with acidic gas including SOx is also available. Herein, we highlight recent studies of multi-pollutant abatement via ozone oxidation process and the promising research topics for better application in industrial sectors.