• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.698-702
• /
• 2005

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.153-153
• /
• 2014

건식 진공펌프(dry vacuum pump)는 기계적 저진공펌프 중 펌프 내부의 기체 배기통로에 오일을 전혀 사용하지 않는 펌프의 통칭으로써, 대개 비접촉형으로 여러 형태의 회전자가 고속으로 회전하면서 흡기구로부터 들어온 기체를 압축해 배기를 한다. 비접촉형에는 루츠(roots)형, 클로(claw)형, 스크류(screw)형, 스크롤(scroll)형 등이 있다. 그 중 스크류형 펌프는 큰 배기속도를 갖는 펌프의 설계에 유리하고 높은 운용온도가 가능하여 다수공정에 쉽게 적용할 수 있는 장점이 있다. 그러나 1단 펌프 구성을 갖게 됨에 따라 루츠형 대비 높은 소비전력 특성을 보이는 약점을 가지고 있다. 본 논문에서는 건식 진공펌프 중의 하나인 스크류형 진공펌프에 대하여, 기본적인 1단 펌프 구성에 스크류 리드(lead)의 변화를 주어 기존의 똑같은 리드의 스크류 진공펌프에 대한 소비전력 및 배기구 온도 등 스크류 형상에 대한 성능평가 연구를 진행 하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.354-355
• /
• 2010

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.8
• /
• pp.717-724
• /
• 2000

It is important to investigate characteristics of flow of refrigerant/oil mixture circulating in a refrigeration system. Therefore the oil concentration in refrigerant/oil mixture should be measured exactly by the adequate measuring instrument. In this paper, the oil concentration was measured by density monitoring system(DMS) in the liquid-line of a inverter-driven heat pump. Experimental result follows ; the main factor that have an effect on oil concentration refrigerant/oil mixture circulating in a refrigeration system is the momentum and kinematic viscosity of refrigerant/oil mixture compressed by scroll compressor.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.539-542
• /
• 2002

• JOURNAL OF ELECTRICAL WORLD
• /
• no.3 s.87
• /
• pp.80-81
• /
• 1984

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1994.06a
• /
• pp.42-48
• /
• 1994

고압하에서 고속으로 작동하는 유압 피스톤 펌프(hydraulic piston pump) 또는 모터(motor) 등의 유압기계(hydrostatic machine)에서 피스톤과 실린더 사이의 간극(clearance)을 흐르는 유압유(hydraulic oil)의 유동에 관한 연구는 이러한 유압기계의 피스톤부 설계에서 특히 중요하다. 본 연구에서는 원통형 피스톤이 원통부와 테이퍼가 진 부분으로 나누어져 있는 복합(composite)형상의 피스톤에 대한 이론해석을 수행하여 피스톤의 형상이 유압 피스톤 펌프의 윤활성능에 미치는 영향을 조사하고자 한다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.5
• /
• pp.408-413
• /
• 2004

An experimental study has been carried out to investigate overheating of oil and bearing housing during pump operation. This problem is of particular interest in the pre diction of lifetime and failure of pump. Transient variation of oil temperature as well as bearing housing temperature is measured to study the effect of oil viscosity, oil amount, and discharge flow rate of pump. It is found that optimal oil quantity as well as proper viscosity of oil is required to keep the safe temperature level of oil and bearing housing in a pump. The oil temperature at steady state is almost not affected by discharge flow rate in the range of discharge flow rates considered in the present study.

• The KSFM Journal of Fluid Machinery
• /
• v.6 no.4 s.21
• /
• pp.7-13
• /
• 2003

Flow characteristics of an automotive oil pump of gerotor type have been investigated numerically. For the simulation of a gerotor whose inner and outer rotors rotate at different speeds, node expansion and contraction method was adopted. ASI (Arbitrary Sliding Interfaces) method was also applied at interface between rotating gerotor and stationary volute. Studied are the flow rates depending on various gerotor in the gap are also studied. The present results showed good agreement with the experimental data.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.1
• /
• pp.50-58
• /
• 2003

An analytical study was carried out to investigate the performance of an oil pumping system of a variable speed compressor using a commercial CFD program. The simulations for the oil supplying system with the oil and air mixture were performed by varying compressor speed from 40 Hz to 90 Hz. Comparing the predicted with the measured data on the modified scroll compressor validated the simulation model. The predicted results were consistent with the test data with a maximum deviation of 12.8%. The oil flow rate significantly increased with a rise of compressor speed due to a higher oil flow rate from the swing pump and a greater centrifugal force on oil gallery.