• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.619-630
• /
• 2022

The concrete mix design and compressive strength evaluation are used as basic data for the durability of sustainable structures. However, the recent diversification of mixing factors has created difficulties in calculating the correct mixing factor or setting the reference value concrete mixing design. The purpose of this study is to design a predictive model of bidirectional analysis that calculates the mixing elements of ternary concrete using deep learning, one of the artificial intelligence techniques. For the DNN-based predictive model for calculating the concrete mixing factor, performance evaluation and comparison were performed using a total of 8 models with the number of layers and the number of hidden neurons as variables. The combination calculation result was output. As a result of the model's performance evaluation, an average error rate of about 1.423% for the concrete compressive strength factor was achieved. and an average MAPE error of 8.22% for the prediction of the ternary concrete mixing factor was satisfied. Through comparing the performance evaluation for each structure of the DNN model, the DNN5L-2048 model showed the highest performance for all compounding factors. Using the learned DNN model, the prediction of the ternary concrete formulation table with the required compressive strength of 30 and 50 MPa was carried out. The verification process through the expansion of the data set for learning and a comparison between the actual concrete mix table and the DNN model output concrete mix table is necessary.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.736-741
• /
• 2022

Lattice-based cryptography is the most practical post-quantum cryptography because it enjoys strong worst-case security, relatively efficient implementation, and simplicity. Ring learning with errors (R-LWE) is a public key encryption (PKE) method of lattice-based encryption (LBC), and the most important operation of R-LWE is the modular polynomial multiplication of rings. This paper proposes a method for optimizing modular multipliers based on approximate computing (AC) technology, targeting the medium-security parameter set of the R-LWE cryptosystem. First, as a simple way to implement complex logic, LUT is used to omit some of the approximate multiplication operations, and the 2's complement method is used to calculate the number of bits whose value is 1 when converting the value of the input data to binary. We propose a total of two methods to reduce the number of required adders by minimizing them. The proposed LUT-based modular multiplier reduced both speed and area by 9% compared to the existing R-LWE modular multiplier, and the modular multiplier using the 2's complement method reduced the area by 40% and improved the speed by 2%. appear. Finally, the area of the optimized modular multiplier with both of these methods applied was reduced by up to 43% compared to the previous one, and the speed was reduced by up to 10%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.409-418
• /
• 2021

As the amount of construction for aerial photography increases, the need for automation of quality inspection is emerging. In this study, an experiment was performed to classify or detect clouds in aerial photos using deep learning techniques. Also, classification and detection were performed by including satellite images in the learning data. As algorithms used in the experiment, GoogLeNet, VGG16, Faster R-CNN and YOLOv3 were applied and the results were compared. In addition, considering the practical limitations of securing erroneous images including clouds in aerial images, we also analyzed whether additional learning of satellite images affects classification and detection accuracy in comparison a training dataset that only contains aerial images. As results, the GoogLeNet and YOLOv3 algorithms showed relatively superior accuracy in cloud classification and detection of aerial images, respectively. GoogLeNet showed producer's accuracy of 83.8% for cloud and YOLOv3 showed producer's accuracy of 84.0% for cloud. And, the addition of satellite image learning data showed that it can be applied as an alternative when there is a lack of aerial image data.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.45-55
• /
• 2022

BIM models allow building spaces to be instantiated and recognized as unique objects independently of model elements. These instantiated spaces provide the required semantics that can be leveraged for building code checking, energy analysis, and evacuation route analysis. However, theses spaces or rooms need to be designated manually, which in practice, lead to errors and omissions. Thus, most BIM models today does not guarantee the semantic integrity of space designations, limiting their potential applicability. Recent studies have explored ways to automate space allocation in BIM models using artificial intelligence algorithms, but they are limited in their scope and relatively low classification accuracy. This study explored the use of Graph Convolutional Networks, an algorithm exclusively tailored for graph data structures. The goal was to utilize not only geometry information but also the semantic relational data between spaces and elements in the BIM model. Results of the study confirmed that the accuracy was improved by about 8% compared to algorithms that only used geometric distinctions of the individual spaces.

• Journal of Intelligence and Information Systems
• /
• v.29 no.1
• /
• pp.265-288
• /
• 2023

Process mining has generally analyzed the default logs of Information Systems such as SAP ERP, but as the use of automation software called RPA expands, the logs by RPA bots can be utilized. In this study, the actual status of RPA automation in the field was identified by applying RPA bots to the work of three domestic manufacturing companies (cosmetic field) and analyzing them after leaving logs. Using Uipath and Python, we implemented RPA bots and wrote logs. We used Disco, a software dedicated to process mining to analyze the bot logs. As a result of log analysis in two aspects of bot utilization and performance through process mining, improvement requirements were found. In particular, we found that there was a point of improvement in all cases in that the utilization of the bot and errors or exceptions were found in many cases of process. Our approach is very scientific and empirical in that it analyzes the automation status and performance of bots using data rather than existing qualitative methods such as surveys or interviews. Furthermore, our study will be a meaningful basic step for bot behavior optimization, and can be seen as the foundation for ultimately performing process management.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.462-469
• /
• 2023

In this study, we propose a method for evaluating the risk of collision between ships to support determination on the risk of collision in a situation in which ships encounter each other and to prevent collision accidents. Because several uncertainties are involved in the navigation of a ship, must be considered when evaluating the risk of collision. We apply the Dempster-Shafer theory to manage this uncertainty and evaluate the collision risk of each target vessel in real time. The distance at the closest point approach (DCPA), time to the closest point approach (TCPA), distance from another vessel, relative bearing, and velocity ratio are used as evaluation factors for ship collision risk. The basic probability assignments (BPAs) calculated by membership functions for each evaluation factor are fused through the combination rule of the Dempster-Shafer theory. As a result of the experiment using automatic identification system (AIS) data collected in situations where ships actually encounter each other, the suitability of evaluation was verified. By evaluating the risk of collision in real time in encounter situations between ships, collision accidents caused by human errora can be prevented. This is expected to be used for vessel traffic service systems and collision avoidance systems for autonomous ships.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.1
• /
• pp.34-41
• /
• 2022

Recently, digital technology and computer-aided design/computer-aided manufacturing (CAD/CAM) environment have changed the clinician treatment method in the fabrication of dentures. The denture manufacturing method with CAD/CAM technology simplifies the treatment and laboratory process to reduce the occurrence of errors and provides clinical efficiency and convenience. In this case, complete dentures were fabricated using stereolithography (SLA)-based 3D printing in patient with mandibular deviation. Recording base were produced in a digital model obtained with an intraoral scanner, and after recording a jaw relation in the occlusal rim, a definitive impression was obtained with polyvinyl siloxane impression material. In addition, facial scan data with occlusal rim was obtained so that it can be used as a reference in determination of the occlusal plane and in arrangement of artificial teeth during laboratory work. Artificial teeth were arranged through a CAD program, and a gingival festooning was performed. The definitive dentures were printed by SLA-based 3D printer using a Food and Drug Administration (FDA)-approved liquid photocurable resin. The denture showed adequate retention, support and stability, and results were satisfied functionally and aesthetically.

• Journal of Appropriate Technology
• /
• v.5 no.2
• /
• pp.70-81
• /
• 2019

The garment industry is one of the most labor-intensive manufacturing industries, with its sewing process relying almost entirely on manual labor. Its costs highly depend on the efficiency of this production line and thus is crucial to determine the production rate in real-time for line balancing. However, current production tracking methods are costly and make it difficult for many Small and Medium-sized Enterprises (SMEs) to implement them. As a result, their reliance on manual counting of finished products is both time consuming and prone to error, leading to high manufacturing costs and inefficiencies. In this paper, a production tracking system that uses the sewing machines' energy consumption data to track and count the total number of sewing tasks completed through Convolutional Neural Network (CNN) classifiers is proposed. This system was tested on two target sewing tasks, with a resulting maximum classification accuracy of 98.6%; all sewing tasks were detected. In the developing countries, the garment sewing industry is a very important industry, but the use of a lot of capital is very limited, such as applying expensive high technology to solve the above problem. Applied with the appropriate technology, this system is expected to be of great help to the garment industry in developing countries.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.7
• /
• pp.325-332
• /
• 2023

Currently, the world's population has already entered a super-aging era, and the rate is expected to increase rapidly to about 40% by 2050. However, the rapid development of automation technology and the online service sector, the main technologies of the Fourth Industrial Revolution, are still further isolating them in a world where many inconveniences and development technologies are applied. As such, alienation in daily life is widely expanded in various fields, but the financial service sector is one of the must-use areas regardless of age because of its strong nature in the public service sector, and is a very important factor in the period when branches are rapidly decreasing. However, the current utilization rate of mobile banking services is not around 5%, so users over 60 are rarely able to use them. The UX design of the most frequently used remittance service screen in mobile banking services was proposed, and the difficulty of trying to find the preferred bank among 56 or more banks was solved by analyzing the usage rate of each bank and dividing it into three stages by age group from 50 or older. In addition, it was designed to strengthen customized services by showing their recently used banks as the top priority. The design proposed in this study obtained an average of 4.8 points or more out of 5 points as a result of usability satisfaction through interviews with less than 50 senior groups. This study is believed to help each bank upgrade its different mobile banking designs in a unified manner.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.1
• /
• pp.1-9
• /
• 2024

Bridges, which are construction structures, have increased from 584 to 38,405 since the 1970s. However, as the number of bridges increases, the number of bridges with a service life of more than 30 years increases to 21,737 (71%) by 2030, resulting in fatal accidents due to basic human resource maintenance of facilities. Accordingly, the importance of bridge safety inspection and maintenance measures is increasing, and the need for decision-making support for supervisors who manage multiple bridges is also required. Currently, the safety inspection and maintenance method of bridges is to write down damage, condition, location, and specifications on the exterior survey map by hand or to record them by taking pictures with a camera. However, errors in notation of damage or defects or mistakes by supervisors are possible, typos, etc. may reduce the reliability of the overall safety inspection and diagnosis. To improve this, this study visualizes damage data recorded in the BIM model in an AR environment and proposes a maintenance plan for bridges with a small number of people through maintenance decision-making support for supervisors.