• 한국정보전자통신기술학회논문지
• /
• 제16권6호
• /
• pp.472-477
• /
• 2023

본 논문에서는 쿼드콥터 드론이 동적인 외부 환경 아래서도 외란에서도 효과적으로 경로를 추종하고 비행 안전성을 유지할 수 있도록 모델 예측 제어(MPC) 기법을 제안한다. MATLAB/Simulink에서 수행된 시뮬레이션을 통해, 외란이 주어지는 비행 시나리오에서 PID와 MPC 두 제어기의 성능을 비교한다. 제안된 설계 방법으로 MPC 제어기가 압력 변화와 공기 밀도 변동과 같은 외란에 대하여 MPC와 PID 제어기의 성능을 비교했을 때에 쿼드콥터 드론의 입력받은 주행 경로와 실제 경로의 Mean Squared Error 수치가 외란을 주기 전에는 0.2의 성능 차이를 보였다. 그리고, 외란을 주었을 때에는 0.8을 차이를 보이며 MPC 제어기의 향상된 경로 추종 정확도를 보여준다.

• 제어로봇시스템학회논문지
• /
• 제18권12호
• /
• pp.1132-1138
• /
• 2012

The MPC (Model Predictive Control) is one of the techniques that can be used to control an unmanned vehicle. It predicts the future vehicle trajectory using the dynamic characteristic of the vehicle and generate the control value to track the reference path. If some obstacles are detected on the reference paths, the MPC can generate control value to avoid the obstacles imposing the inequality constraints on the MPC cost function. In this paper, we propose an obstacle modeling algorithm for MPC with inequality constraints for obstacle avoidance and a method to set selective constraint on the MPC for stable obstacle avoidance. Simulations with the field test data show successful obstacle avoidance and way point tracking performance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.402-403
• /
• 2018

본 논문에서는 5-레그 인버터(Five-leg Inverter)를 이용하여 2대의 유도전동기를 구동하는 시스템의 모델 예측 제어 기법을 제안한다. 기존 모델 예측 제어 기법인 FS-MPC(Full-Set MPC)는 5-레그 인버터에서 가능한 32가지의 모든 스위칭 상태를 고려하기 때문에 제어 성능은 뛰어나지만 계산량이 많아지는 단점이 있다. 본 논문에서는 FS-MPC보다 제어 성능의 저하를 최소화하고 계산량은 현저히 감소시킨 모델 예측 제어 기법을 제안하며 시뮬레이션을 통해 제안하는 기법의 성능 및 타당성 검증을 검증한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1400-1403
• /
• 1996

In this study, we applied the model predictive control(MPC) to Multi-loop control structure. Since MPC has many advantage for MIMO process and constraints handling, it induces the better performance to apply MPC to multi-loop control. And we suggest the advanced method to reduce the calculation load using the wavelet transform. It shows the possibility to substitute the existing PID control based structure with MPC.

• 전력전자학회논문지
• /
• 제19권3호
• /
• pp.249-256
• /
• 2014

This paper proposes a torque control method of permanent magnet synchronous motor, which has small torque ripple. The proposed control method is using the finite control set-model predictive control(FCS-MPC) strategy. An optimal input voltage vector minimizing a cost function is chosen among 6 passible active input voltage vectors following the FCS-MPC strategy. Then, a modulation factor for the optimal input voltage vector is computed to minimize the torque ripple. Thus, the proposed control method yields fast torque response and small torque ripple. The efficacy of the proposed method was verified through simulation and experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.396-397
• /
• 2019

본 논문은 유한요소 모델예측제어(FCS-MPC)의 샘플링 시간을 가변하여 표면부착형 영구자석 동기 전동기(SPMSM)의 토크 리플을 개선하고 스위칭 손실을 저감하는 가변 샘플링 시간이 적용된 모델예측제어 기법을 제안한다. 기존 FCS-MPC는 토크 리플을 저감하기 위해 고정 샘플링 시간을 짧게 설정하였다. 고정 샘플링 시간을 짧게 설정함에 따라, 전압벡터의 변경횟수가 증가하여 스위칭 손실이 증가하였다. 본 논문은 이러한 문제점을 해결하기 위해 가변 샘플링 시간이 적용된 FCS-MPC를 통해 토크 리플을 저감하고, 전압벡터의 변경횟수를 감소시켜 스위칭 손실을 저감하였다. 본 논문에서 제안하는 기법은 시뮬레이션을 통해 증명되었다.

• 제어로봇시스템학회논문지
• /
• 제12권12호
• /
• pp.1202-1208
• /
• 2006

Development of a model predictive control(MPC) algorithm and its application to the condensate recycle process of a cogeneration power station has been conducted. The cogeneration power station has different characteristics from other industrial processes where MPC has been dominantly applied in that the operating mode changes continuously with seasons and we Ether. Such a characteristic makes it difficulty, a linearized model was derived from mass and pressure balances and linearization. The MPC algorithm has been developed so that the controller tuning is easy with one tuning knob for each output and the constrained optimization is solved by an interior point method. Performance of the MPC algorithm has been verified with the numerically simulated process under various disturbance scenarios and mode changes.

• 제어로봇시스템학회논문지
• /
• 제22권6호
• /
• pp.453-462
• /
• 2016

This paper proposes a torque control method for surface mounted permanent magnetic synchronous motor (PMSM) driven by a 2-level voltage source driven inverter, which has fast torque response and small torque ripple. The proposed torque control method follows the finite control set model predictive control (FCS-MPC) strategy. A reference state is derived at each time step for the given time varying torque reference and the cost index is defined so that the tracking error for this reference state should be penalized. The choice of an optimal output voltage vector is made first from the 6 possible active voltage vectors of the 2-level voltage source inverter. Then a modulation factor for the chosen optimal voltage vector is obtained so that the torque ripple can be reduced further. It is shown that the proposed FCS-MPC control method yields fast torque tracking response and small torque ripple through simulation and experiments.

• 제어로봇시스템학회논문지
• /
• 제21권3호
• /
• pp.237-242
• /
• 2015

This paper presents a method to enhance tracking performance of an input-constrained bilinear system using MPC (Model Predictive Control) when a feasible tracking control is known. Since the error dynamics induced by the known tracking control is asymptotically stable, there exists a Lyapunov function for the stable error dynamics. By defining a cost function including the Lyapunov function and describing tracking performance, an MPC law is derived. In simulation, the performance of the proposed MPC law is demonstrated by applying it to a converter model.

• 전기학회논문지
• /
• 제61권5호
• /
• pp.735-743
• /
• 2012

In this paper, we present model predictive control (MPC) applied to lane keeping system (LKS) based on a vision module. Due to a slow sampling rate of the vision system, the conventional LKS using single rate control may result in uncomfortable steering control rate in a high vehicle speed. By applying MPC using multi-rate Kalman filter to active steering control, the proposed MPC-based active steering control system prevents undesirable saturated steering control command. The effectiveness of the MPC is validated by simulations for the LKS equipped with a camera module having a slow sampling rate on the curved lane with the minimum radius of 250[m] at a vehicle speed of 30[m/s].