• Journal of Korean Society of Transportation
• /
• v.14 no.2
• /
• pp.89-118
• /
• 1996

The development and implementation of a real-time, traffic adaptive control scheme based on fuzzy logic through Video Image Detector systems (VIDs) is presented. Through VIDs based image processing, fuzzy logic can be used for a real-time traffic adaptive signal control scheme. Fuzzy control logic allows linguistic and inexact traffic data to be manipulated as a useful tool in designing signal timing plans. The fuzzy logic has the ability to comprehend linguistic instructions and to generate control strategy based on a priori verbal communication. The implementation of fuzzy logic controller for a traffic network is introduced. Comparisons are made between implementations of the fuzzy logic controller and the actuated controller in an isolated intersection. The results obtained from the application of the fuzzy logic controller are also compared with those corresponding to a pretimed controller for the coordinated intersections. Simulation results from the comparisons indicate the performance of the system is between under the fuzzy logic controller. Integration of the aforementioned schemes into and ATMS framework will lead to real-time adjustment of the traffic control signals, resulting in significant reduction in traffic congestion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.10
• /
• pp.948-956
• /
• 2014

Today, Intelligent Vehicle Detection System seeks to reduce the negative factors, such as accidents over to get the traffic information of existing system. This paper proposes detection algorithm for the illegal U-turn vehicles which can cause critical accident among violations of road traffic laws. We predicted that if calculated optical flow vectors were shown on the illegal U-turn path, they would be cause of the illegal U-turn vehicles. To reduce the high computational complexity, we use the algorithm of pyramid Lucas-Kanade. This algorithm only track the key-points likely corners. Because of the high computational complexity, we detect center lane first through the color information and progressive probabilistic hough transform and apply to the around of center lane. And then we select vectors on illegal U-turn path and calculate reliability to check whether vectors is cause of the illegal U-turn vehicles or not. Finally, In order to evaluate the algorithm, we calculate process time of the type of algorithm and prove that proposed algorithm is efficiently.

• Journal of Korean Society of Transportation
• /
• v.33 no.3
• /
• pp.284-293
• /
• 2015

The objective of this paper is to determine the conditions of road surface by utilizing the images collected from closed-circuit television (CCTV) cameras installed on roadside. First, a technique was examined to detect wet surfaces at nighttime. From the literature reviews, it was revealed that image processing using polarization is one of the preferred options. However, it is hard to use the polarization characteristics of road surface images at nighttime because of irregular or no light situations. In this study, we proposes a new discriminant for detecting wet and dry road surfaces using CCTV image data at night. To detect the road surface conditions with night vision, we applied the wavelet packet transform for analyzing road surface textures. Additionally, to apply the luminance feature of night CCTV images, we set the intensity histogram based on HSI(Hue Saturation Intensity) color model. With a set of 200 images taken from the field, we constructed a detection criteria hyperplane with SVM (Support Vector Machine). We conducted field tests to verify the detection ability of the wet road surfaces and obtained reliable results. The outcome of this study is also expected to be used for monitoring road surfaces to improve safety.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.25-31
• /
• 2020

In this study, for the safe use of a portable ultrasonic skin-beauty device, an android app was developed to show the irradiation locations of focused ultrasound to a user through augmented reality (AR) and enable stable self-surgery. The utility of the app was assessed through testing. While the user is making a facial treatment with the beauty device, the user's face and the ultrasonic irradiation location on the face are detected in real-time with a smart-phone camera. The irradiation location is then indicated on the face image and shown to the user so that excessive ultrasound is not irradiated to the same area during treatment. To this end, ML-Kit is used to detect the user's face landmarks in real-time, and they are compared with a reference face model to estimate the pose of the face, such as rotation and movement. After mounting a LED on the ultrasonic irradiation part of the device and operating the LED during irradiation, the LED light was searched to find the position of the ultrasonic irradiation on the smart-phone screen, and the irradiation position was registered and displayed on the face image based on the estimated face pose. Each task performed in the app was implemented through the thread and the timer, and all tasks were executed within 75 ms. The test results showed that the time taken to register and display 120 ultrasound irradiation positions was less than 25ms, and the display accuracy was within 20mm when the face did not rotate significantly.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.85-96
• /
• 2004

The study begin with a basic concept, if the occupancy length of vehicle detector is directly proportional to the delay of vehicle. That is, it analogize vehicle's delay of a occupancy time. The results of a study was far superior in the estimation of a queue length. It is a very good points the operator is not necessary to optimize s1, s2, Thdoc. Thdoc(critical congestion degree) replaced 0.7 with 0.2 - 0.3. But, if vehicles have been experience in delay was not occupy vehicle detector, the study is in existence some problems. In conclusion, it is necessary that stretch queue detector or install paired queue detector. Also I want to be made steady progress a following study relation to this study, because it is required traffic signal control on congestion.

• Journal of Korean Society of Transportation
• /
• v.23 no.4 s.82
• /
• pp.71-79
• /
• 2005

Existing arterial link travel time estimation methods relying on either aggregate point-based or individual section-based traffic data have their inherent limitations. This paper demonstrates the utility of data fusion for improving arterial link travel time estimation. If the data describe traffic conditions, an operator wants to know whether the situations are going better or worse. In addition, some traffic information providing strategies require predictions of what would be the values of traffic variables during the next time period. In such situations, it is necessary to use a prediction algorithm in order to extract the average trends in traffic data or make short-term predictions of the control variables. In this research. a multi-step ahead prediction algorithm using Data fusion was developed to predict a link travel time. The algorithm performance were tested in terms of performance measures such as MAE (Mean Absolute Error), MARE(mean absolute relative error), RMSE (Root Mean Square Error), EC(equality coefficient). The performance of the proposed algorithm was superior to the current one-step ahead prediction algorithm.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.241-244
• /
• 2003

Nowadays image processing is very useful for some field of traffic applications. The one reason is we can construct the system in a low price, the other is the improvement of hardware processing power, it can be more fast to processing the data. In this study, I propose the traffic monitoring system that implement on the embedded system environment. The whole system consists of two main part, one is host controller board, the other is image processing board. The part of host controller board take charge of control the total system, interface of external environment. and OSD(On screen display). The part of image processing board takes charge of image input and output using video encoder and decoder, image classification and memory control of using FPGA, control of mouse signal. And finally, fer stable operation of host controller board, uC/OS-II operating system is ported on the board.

• Journal of Korean Society of Transportation
• /
• v.16 no.3
• /
• pp.113-121
• /
• 1998

본 연구에서는 신호제어 및 ITS 분야에 활용하기 위한 검지 시스템을 구성하기 위 한 알고리즘의 하나인 대기 행렬 계측 알고리즘을 개발하였다. 본 연구에서는 대기열의 속 성을 standing queue와 moving queue로 구분하여, 각 속성에 따라 대기열의 발생지점을 계측한다. 알고리즘의 평가는 아주대학교 앞 4지교차로의 한 접근로에서 실시되었다. 평가 항목으로는 오차율과 통계적 검정을 실시하였으며, standing queue와 moving queue에 대 하여 주·야간 각 50개씩 sample을 가지고 실시하였다. 평가 결과 standing queue는 주·야 간 모두 비교적 우수한 것으로 평가되었으나, moving queue는 미흡한 결과를 나타내어, 좀 더 보완이 필요한 것으로 나타났다. 대기열의 속성을 standing queue와 moving queue로 분리함으로써 접근로의 상황을 더욱 정확하게 판단할 수 있을 것으로 기대된다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.57-62
• /
• 2011

Recently, various interaction was demanded from rapid development and use of portable device. So, operation of touch interface in tablet and smart phone needs many requirements and proactivity. In this paper, for variety of users and convenient interaction, It is aimed to realize virtual reality mouse of portable device. It reflected similar interaction of an existing mouse and it used infrared image without intensity of illumination. Also, It analyzed finger point information of middle and index finger of users and it designed virtual mouse without proactivity and constraint of space.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.74-91
• /
• 2023

Several that analyzed the effectiveness of traffic safety facilities a method of comparing changes in the number of accidents, accident severity, speed through traffic accident data before and after installation or speed data collected from vehicle detection systems (VDS). , when traffic accident data is used, it takes a long time to collect because must be collected for at least one year before and after installation. , the road environment may change during this period, such as the addition of other traffic safety facilities in addition to the facilities to be analyzed. , the location of the VDSs for speed data is often different from the location where analysis is required, and there is a problem in that the investigators are exposed to the risk of traffic accident during on-site investigation. Therefore, this study a case study by establishing a methodology to determine effectiveness video images with a drone, extracting data using a program, and comparing vehicle driving speeds before and after speed reduction facilities. Vehicle speed surveys using drones are much safer than observational surveys conducted on highways and have the advantage of tracking speed changes along the vehicle, it is expected that they will be used for various traffic surveys in the future.