• Korean Journal of Materials Research
• /
• v.6 no.9
• /
• pp.919-924
• /
• 1996

사염화우라늄을 제조하기 위한 가장 효율적인 반응계는 이산화우라늄, 염소가스와 탄소분말이다. 여러 가지 실험변수 가운데 이산화우라늄의 염소화반응에 사용된 염소가스 주입량과 탄소의 양이 사염화우라늄 제조에 미치는 영향에 관하여 연구하였다. 각각의 실험변수들에 대한 전화율과 휘발률 계산을 통해 효율적인 반응을 위한 적정 염소가스 주입량과 탄소의 양을 구하였고, 이산화우라늄의 증가함에 따라 직접접촉에 의한 기체-고체반응에서는 전화율과 휘발률은 증가했으나 이후 과량을 첨가함에 따라 감소하였고, 용융염내의 기체-액체반응에서는 전화율의 미미한 증가와 휘발률의 감소를 확인하였가. 염소주입량이 증가함에 따라 전화율과 휘발률이 증가했으며, 과량의 염소가수 주입시 고이온가 염화물의 생성량이 증가하였다.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.643-648
• /
• 2010

Production of biodiesel from soybean oil catalyzed by Lewis acidic ionic liquids(ILs) containing metal chloride salts was investigated in this study. Metal chloride salts, such as $SnCl_2$, $ZnCl_2$, $AlCl_3$, $FeCl_3$ and CuCl, were screened for oil transesterification in the range of 363-423 K. Among these metal chlorides, tin chloride showed particularly high catalytic property for the oil transesterification. Similarly, among these Lewis acidic ionic liquid catalysts, $[Me_3NC_2H_4OH]Cl-2SnCl_2$ resulted in a high fatty acid methyl esters(FAMEs) content of 91.1% under the following reaction conditions: 403 K, 14 h, and a molar ratio of 1:12:0.9 (oil:methanol:catalyst). Unlike the pure tin chloride catalysts, Lewis acidic ILs containing tin chloride $[Me_3NC_2H_4OH]Cl-2SnCl_2$ catalyst could be recycled up to five times without any significant loss of activity by separating from the FAMEs with simple decantation. The Lewis acidity and high moisture-stability of this catalyst appeared to be responsible for the excellent catalytic performance. The effects of reaction time and the molar ratio of methanol/catalyst to oil on the FAMEs production were also studied in this work.

• Clean Technology
• /
• v.25 no.2
• /
• pp.107-113
• /
• 2019

Numerical model that considered the shrinking core model and elutriation and degradation of particles was developed to predict selective chlorination of ilmenite and carbo-chlorination of $TiO_2$ in a two stage fluidized bed chlorination furnace. It is possible to analyze the fluidized bed chlorination reaction to be able to reflect particle distribution for mass balances and the chlorination reaction. The numerical model showed an accuracy with error less than 6% compared with fluidized bed experiments. The chlorination degree with particle size change was greater with a smaller particle size, and there was a 100 min difference to obtain a chlorination degree of 1 between $75{\mu}m$ and $275{\mu}m$. This was not shown to such a great extent with variation of temperature ($800{\sim}1000^{\circ}C$), and there was only a 10 min difference to obtain a chlorination degree of 0.9. In the first selective chlorination process, the mass reduction rate approached to the theoretical value of 0.4735 after 180 min, and chlorination changed the Fe component into $FeCl_2$ or $FeCl_3$ and showed nearly 1. In the second carbo-chlorination process, the chlorination degree of $TiO_2$ approached 0.98 and the mass fraction reached 0.02 with conversion into $TiCl_4$. In the first selective chlorination process, 98% of $TiO_2$ was produced at 180 min, and this was changed into 99% of $TiCl_4$ after an additional 90 min. Also the mass reduction rate of $TiO_2$ was reduced to 99% in the second continuous carbo-chlorination process.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.3
• /
• pp.1-8
• /
• 2017

The present study aimed to investigate the effect of calcium chloride($CaCl_2$) on the growth and physiological responses of Pinus strobus and the variables that are sensitive to $CaCl_2$. Thus, changes in the visible damage, growth of root collar diameter, plant water content, chlorophyll content and composition, maximum PS II photochemical efficiency, and electron transport rate of P. strobus was analyzed in relation to treatment witih $CaCl_2$. A $CaCl_2$ solution(0.5, 1.0 and 3.0%) was applied in the root zone before leaf unfolding. Leaf browning, defoliation, and drying were observed with $CaCl_2$ application and this pattern was aggravated as the $CaCl_2$ concentration increased and the treatment period became longer. The decrease of growth in root collar diameter and height and leaf water content were observed at $CaCl_2$ 1.0% and 3.0%. The total chlorophyll content indicated that photopigment, PS II photochemical efficiency and electron transport rate significantly decreased at $CaCl_2$ 3.0%. In conclusion, $CaCl_2$ affected leaf water content and led to a decrease of capability in light harvesting and photochemical responses. Also, as a result of the correlation between calcium chloride concentration and growth and physiological response parameters, it was found that the leaf moisture content and the ratio of chlorophyll a and b reflect the damage level of calcium chloride sensitively because their coefficient of determinations were relatively high.

• Journal of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.281-288
• /
• 1978

Pseudo-first order rate constants $k_{obs}$ were determined for the reactions of naphthalenesulfonyl chlorides (1-NSC and 2-NSC) and anilines. The second order rate constant $k_2$ and third order catalytic $k_3$ were then determined from $k_{obs}$. For 1-NSC peri-hydrogen effect was observed. The large Brønsted ${\beta}$ and large negative slopes ${\rho}$ for the Hammett plots were obtained. These results with the unsually low values of activation parameters were consistent with the $S_AN$-elimination mechanism, but these can be equally well interpreted with the associative $S_N2$mechanism.

• Resources Recycling
• /
• v.16 no.6
• /
• pp.34-38
• /
• 2007

For recycling of tantalum from obsolete condenser, physical separations and chlorination of tantalum scraps with $Cl_2$ and $CCl_4$ were investigated. The recovery ratio of tantalum from obsolete condenser was 98% by using a multidisciplinary process of crushing by stamp mill, wet gravity separation by the shaking table, and air classification. In the chlorination reaction of non-oxidized Ta anode with $Cl_2$, the highest weight loss ratio is at least 60%, while in the chlorination reaction of Ta anode with $CCl_4$, the reaction rate for the oxidized Ta anode is faster than that of the non-oxidized Ta anode.

• Clean Technology
• /
• v.23 no.2
• /
• pp.172-180
• /
• 2017

Thermodynamic evaluation indicates that nearly 100% conversion of elemental mercury to oxidized mercury can be attained by HCl of several tens of ppm level at the temperature window of SCR reaction. Cu-, Fe-, Mn-chloride loaded $V_2O_5-WO_3/TiO_2$ catalysts revealed good NO removal activity at the operating temperature window of SCR process. The catalysts with high desorption temperature indicating adsorption strength of $NH_3$ revealed higher NO removal activity. The HCl fed to the reaction gases promoted the oxidation of mercury. However, the activity for the oxidation of elemental mercury to oxidized mercury by HCl was suppressed by $NH_3$ inhibiting the adsorption of HCl to catalyst surface under SCR reaction condition containing $NH_3$ for NO removal. Metal chloride loaded $V_2O_5-WO_3/TiO_2$ catalysts showed much higher activity for mercury oxidation than $V_2O_5-WO_3/TiO_2$ catalyst without metal chloride under SCR reaction condition. This is primarily attributed to the participation of chloride in metal chloride on the catalyst surface promoting the oxidation of elemental mercury.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.5
• /
• pp.129-137
• /
• 1998

본 연구에서는 해수 및 염화나트륨이 공급되는 환경에서 실리카 흄의 알칼리실리카 반응에 대한 억제효과를 구명한 것이다. 연구에 사용된 염화나트륨 농도는 2.8%, 10%, 20%여Tdmaum 반응성 골재는 일본산 안산암이었다. 실리카 흄은 노르웨이산으로 비표면적인 20$m^2$/g인 것을 사용했다. 실리카 흄의 치환율은 시멘트 중량에 대해 5%, 7%, 10%로 하였다. 연구결과, 20%의 염화나트륨이 공급되는 환경에서 알칼리실리카반응에 의한 유해한 팽창이 억제는 본 연구에서 사용된 실리카 흄의 경우, 치환율 % 이상에서 달성되었다.

• Journal of the Korean Chemical Society
• /
• v.50 no.4
• /
• pp.328-337
• /
• 2006

purpose of this study was to find out problems in experiments for electrolysis of an aqueous CuCl2 solution in high school science textbooks and to suggest an improved experiment considering students' capability of experimenting and laboratory safety in high schools. For this study, the experiments for electrolysis of an aqueous CuCl2 solution presented in 11 high school science textbooks were classified by their experimental methods. After high school chemistry teachers performed the experiments as presented in the high school science textbooks, an analysis was performed on problems of the experiments, and an improved experiment was devised. According to the results of this study, in the experiments for electrolysis of an aqueous CuCl2 solution using a U type tube and a U type tube with branch, reaction velocity of the electrolysis was slow, therefore, a side reaction was generated. In the experiment using a beaker, reaction of each electrode could not be observed separately. And in the experiment using an electrolysis instrument, it was difficult to identify property of the reaction product. In the improved experiment using a reaction vessel of ㅂshape, reaction velocity of the electrolysis was fast, reaction of each electrode could be observed separately, and the side reaction decreased. From these results, it was suggested that the improved experiment would help high school students understand scientific conception regarding electrolysis.

• Journal of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.262-269
• /
• 1977

The solvolysis of 1-naphthalene-and 2-naphthalenesulfonyl chlorides in acetone-water mixtures have been studied by means of conductometry. The solvent effect and mechanism have been discussed in terms of variation in solvent composition and activation parameters. The reaction was predominantly $S_N2$ type, but bond breaking increased with the increase of water content. The rate constant for 1-naphthyl compound was smaller than that of 2-naphthyl compound due to the ground state stabilization effect and peri-hydrogen effect, and the latter effect was similar to that in ethanol-water mixtures.