• 제목/요약/키워드: 염소 발생

검색결과 323건 처리시간 0.024초

초기 휨균열이 철근콘크리트 부재의 염화물침투저항성에 미치는 영향 (Effect of Initial Flexural Crack on Resistance to Chloride Penetration into Reinforced Concrete Members)

  • 양은익;진상호;김명유;최윤석;한상훈
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제15권2호
    • /
    • pp.79-87
    • /
    • 2011
  • 본 연구에서는 초기 균열을 도입한 철근콘크리트 부재에 대한 침지 염화물 침투 실험을 수행하였다. 염화물 확산 특성과 임계 균열폭을 비교하였으며, 콘크리트 자기복원 특성을 검토하였다. 실험결과에 따르면, 표면 균열폭이 증가할수록 염화물 침투저항성이 크게 감소하였으며, 광물질 혼화재를 사용할 경우, 비균열 부재의 염화물 침투저항성은 크게 개선되었지만, 고로슬래그 및 플라이애쉬 혼화재를 사용할 경우에 균열이 발생하게 되면 도리어 염화물 침투저항성은 보통 콘크리트에 비해 크게 저하하였다. 임계 균열폭은 침지 염화물 침투 실험 결과 평균 $29{\mu}m$으로 측정되었다. 자기복원 현상에 의해 $4{\sim}15{\mu}m$ 범위의 균열이 복원되었다. 그러나 콘크리트 자기복원 현상에 의해 시각적으로 복원된 부분의 염화물 침투 저항성은 완전히 회복되지 않았다.

조사료원 종류가 거세 염소(Capra hircus)의 영양소 소화율 및 온실가스 발생량에 미치는 영향 (Nutrient Digestibility and Greenhouse Gas Emission in Castrated Goats (Capra hircus) Fed Various Roughage Sources)

  • 나영준;황석진;최용준;박기태;이상락
    • 한국초지조사료학회지
    • /
    • 제38권1호
    • /
    • pp.39-43
    • /
    • 2018
  • The objective of this study was to determine the effect of various roughage sources on nutrient digestibility and enteric methane ($CH_4$), and carbon dioxide ($CO_2$) production in goats. Four castrated black goats ($48.5{\pm}0.6kg$) were individually housed in environmentally controlled respiration-metabolism chambers. The experiment design was a $4{\times}4$ balanced Latin square design with 4 roughage types and 4 periods. Alfalfa, tall fescue, rice straw, and corn silage was used as representative of legume, grass, straw, and silage, respectively. Dry matter digestibility was higher (p < 0.001) in corn silage than in alfalfa hay. Dry matter digestibility of alfalfa hay was higher than those of tall fescue or rice straw (p < 0.001). Neutral detergent fiber digestibility of tall fescue was lower (p < 0.001) than those of alfalfa, rice straw, or corn silage. Daily enteric $CH_4$ production and the daily enteric $CH_4$ production per kilogram of $BW^{0.75}$, dry matter intake (DMI), organic matter intake (OMI), digested DMI, and digested OMI of rice straw did not differ from those of tall fescue but were higher (p < 0.001) than those of alfalfa or corn silage. Roughage type had no effect on enteric $CO_2$ emission in goats. Straw appeared to generate more enteric $CH_4$ production than legume or silage, but similar to grass.

수돗물 병입수 중 염소소독부산물 및 aldehyde의 발생 특성 (Characteristics of Chlorination Byproducts and Aldehyde Occurrence in Bottled Tap Water)

  • 이연희;박주현;김현구;안경희;김태승;김동훈;권오상
    • 한국물환경학회지
    • /
    • 제28권5호
    • /
    • pp.754-761
    • /
    • 2012
  • Several drinking water treatment plants (DWTPs) produce the bottled tap waters (BTWs) as pilot production and provide them for noncommercial use. In 2008, acetaldehyde and chloral hydrate were detected in some BTWs and the public worry over the safety of the water. In this study, the BTWs produced from 7 DWTPs were tested for 13 chemicals including disinfection byproducts (DBPs). The level of four trihalomethanes (THMs) were increased up to 15 days. The average concentration of them was 0.0075 mg/L at the time of bottling and it was increased to 0.0214 mg/L after 15 days. The average acetaldehyde concentration was 0.0406 mg/L at the time of bottling but it was went up to 0.2251 mg/L after 11 days and then decreased. Although the initial concentrations of DBPs were below the drinking water standard, we also traced them at different storage conditions. Temperature affected the formations of THMs and acetaldehyde concentrations significantly. While the average concentration of THMs ranged from 0.0113 to 0.0182 mg/L at $25^{\circ}C$, it was increased to 0.0132 ~ 0.0256 mg/L at $50^{\circ}C$. In case of acetaldehyde, concentration ranged from 0.0901 to 0.2251 mg/L at $25^{\circ}C$, it was increased to 0.3394 ~ 1.0591 mg/L at $50^{\circ}C$. Throughout the tests with 7 BTWs samples, none of the chemicals was exceeded the drinking water standard of Korea. Therefore, it is recommended to avoid the exposure of BTWs to sunlight or high temperature during distribution and storage.

싸이폰원리를 이용한 콩나물 자동재배기 개발 (Development of Soybean Sprouter Using Principle of Siphoning)

  • 김중만;최용배;양동근
    • 한국식품과학회지
    • /
    • 제29권3호
    • /
    • pp.460-463
    • /
    • 1997
  • 콩나물 재배시 수주방식은 콩나물 재배기 자동화에 중요한 관건이다. 본 재배기는 기존 콩나물 재배기의 단점을 획기적으로 개선한 재배기로 싸이폰이 내설된 저수조와 분수통 및 재배통으로 구성되어 구조가 간단하면서 완전 자동으로 수주가 가능하고 고장이 없는 내구성 콩나물 재배기이다. 수주방법은 적수(滴水)를 모아 일정시간 간격으로 자동 수주가 이루어 지는데 수주간격은 분당 떨어지는 적수량을 조절하여 쉽게 조절할 수 있다. 이 재배기는 사용할 때 경제적이며 사용중 고장이 없고 소음이 발생하지 않고, 특히 염소 가스로 살균된 수돗물을 이용하여 건전하게 콩나물을 재배할 수 있다. 더욱이 중요한 것은 본재배기는 콩나물 속성재배 적온인 $25{\sim}30^{\circ}C$에서 건전한 재배가 가능하였으나 다른 재배기는 $20^{\circ}C$ 이하에서만 재배가 가능하였다.

  • PDF

콘크리트 구조물 보수용 라텍스개질 모르타르의 내구성능 평가 (Evaluation of Durability on Latex Modified Mortar for maintenance in concrete structure)

  • 성상경;박성기;이상우;원종필;박찬기
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.633-636
    • /
    • 2008
  • 콘크리트 구조물은 시간이 지남에 따라 각종 열화현상이 발생하고 그로 인해 구조물의 내하력 및 내구성능이 저하되어 콘크리트 구조물의 내구연한을 증가시키기 위한 보수 및 보강이 필요하며 현재 다양한 종류의 보수재료 및 공법이 개발되어 적용되고 있는 실정이다. 본 연구의 목적은 콘크리트 구조물 보수재료로서 라텍스개질 모르타르의 내구성능을 평가하기 위한 것으로 현재 국내에서 널리 적용되고 있는 2가지 종류의 뿜칠용 보수재료와의 비교 실험을 실시하여 내구성능(소성수축, 건조수축, 동결융해저항성, 염소이온 침투저항성, 내약품성)을 비교 분석하였다. 라텍스개질 모르타르의 경우 기존에 적용되고 있는 제품에 비해 우수하거나 동등한 성능을 보이는 것으로 나타났으며 현장적용에 있어 라텍스개질 모르타르는 문제가 없을 것으로 판단되나 추가적인 연구가 필요할 것이다.

  • PDF

식물계활성탄과 석탄계활성탄에서의 세균재생장 비교 (Comparison of Bacterial Regrowth on Plant- and Coal-based Granular Activated Carbon)

  • 이동근;박성주;하배진;하종명;이상현;이재화
    • KSBB Journal
    • /
    • 제19권2호
    • /
    • pp.104-109
    • /
    • 2004
  • 정수용 입상활성탄 (granular activated carbon, GAC)으로 사용되는 식물계와 석탄계 활성탄의 미생물 재생장 현상을 파악하고 비교하기 위해 활성탄 칼럼을 대상으로, 유입수와 유출수 비교와 함께 활성탄 상의 종속영양세균의 분포와 활성을 분석하였다. 활성탄 칼럼은 총유기탄소와 잔류염소를 잘 제거하였으며 이온은 잘 제거하지 못하는 것을 알 수 있었으며, 칼럼 유출수의 세균수는 10일째 파과 (breakthrough)가 발생한 후 증가하여 최종적으로 석탄계와 식물계 활성탄에서 각각 1.1 ${\times}$ $10^3$, 6.2 ${\times}$ $10^2$ CFU/mL로 나타났다. 칼럼 내부 활성탄 상의 미생물 활성은 GAC-C가 15.35~29.06$\mu\textrm{g}$ INT-formazan/g-GAC/h이었고, 세균수와 세균활성 모두 석탄계가 조금 높았다. 입상활성탄 상의 미생물 재생장 현상이 확인되었고, 석탄계 활성탄이 야자계 활성탄보다 미생물 재생장 유발 효과가 큰 것으로 판명되었으며, 활성탄 상의 세균에 의한 유기물 제거능력이 확인되었다.

PWM 전압제어로 생체에 필요한 알칼리 이온수의 농도(ph)변화에 관한 연구 (Study about a density (ph) change of an alkaline ion by PWM voltage control necessary for a living body)

  • 권윤중;이성창
    • 전자공학회논문지SC
    • /
    • 제41권6호
    • /
    • pp.37-42
    • /
    • 2004
  • 사람의 체질이 산성화로 변화되는 것을 막고 생체 밸런스를 유지하기위해 알칼리수를 인간의 인체에 공급할 필요가 있다. 알칼리수는 인체에 유익한 칼슘(Ca/sup +/), 칼륨(K/sup +/), 마그네슘(Mg/sup +/), 나트륨(Na/sup +/)등을 포함한 물로 되어있다. 이러한 알칼리수를 생성하기 위해서는 물을 전기분해하여 격막(격리된 특수막)을 통해 - 전극 쪽으로 미네랄들을 모아 생성한다. 물론 반대로 + 전극쪽으로는 염소(Cl), 인(P), 유황(S) 등의 - 이온을 띈 유기물들이 모여 산성수도 발생되어 다른 용도의 물로 사용할 수 있다. 이 전기분해 과정에서 - 극판과 + 극판에 PWM(pulse width modulation)전압을 Microprocessor를 이용하여 4종류의 PWM 전압을 구현하고, 전압별 ph농도 변화를 고찰해 보았다. 이와 같이 PWM제어를 이용하면 필요한 ph농도 값의 알칼리 이온수를 설정 값으로 하면 정확하게 얻을 것으로 예상된다.

저심도 철도시스템 구축을 위한 저탄소 친환경 PC 박스용 콘크리트의 성능 평가 (A Performance Evaluation of Concrete for Low-carbon Eco-friendly PC Box for Near-surface Transit System)

  • 고태훈;하민국;정호진
    • 한국산학기술학회논문지
    • /
    • 제16권5호
    • /
    • pp.3587-3595
    • /
    • 2015
  • 본 연구에서는 저비용의 저심도 도시철도시스템을 구축하기 위하여 산업부산물인 고로슬래그 미분말, 플라이애시 및 급냉 전기로 산화슬래그를 사용하여 개발된 저탄소 친환경 PC 박스용 콘크리트의 역학적 성능 및 내구성을 평가 하였다. 역학적 특성을 평가한 결과, 재령 1일 압축강도는 모든 조건에서 설계기준강도($f_{ck}$) 35MPa의 90% 이상 강도 발현 하는 것으로 나타나 공기단축 가능으로 건설비용을 절감할 수 있을 것으로 판단된다. 또한, 소요의 물성 및 설계기준강도($f_{ck}$) 35MPa를 만족하는 범위에서 시멘트 단독 사용 조건보다 염소이온침투성 및 확산계수가 낮게 나타나 내염성능이 우수한 것으로 나타났으며, 동결융해 저항성 및 화학저항성의 경우에도 내구성능이 우수한 것으로 나타났다. 따라서 저탄소 친환경 PC 박스용 콘크리트를 사용할 경우, 시멘트 제조 시 발생되는 이산화탄소 및 환경부하를 저감할 수 있을 것으로 기대된다.

원유 증류 공정 탑 상부의 부식 예측 모델 개발 (Development of a Forecasting Model for Refinery Crude Column Overhead Corrosion Control)

  • 김승남;김정환;문일
    • 대한기계학회논문집A
    • /
    • 제35권2호
    • /
    • pp.143-148
    • /
    • 2011
  • 정유 석유화학 플랜트에서 탑 상부의 부식은 현장에서 자주 발생되는 심각한 문제이다. 특히 정유 공정 탑 상부에는 황화수소, 염소 등의 부식 물질들로 인하여 그 피해 정도가 심각하다. 따라서 본 연구에서는 정유 공정 탑 상부의 부식 메커니즘을 분석하고, 부식률을 예측하는 모델을 개발하였다. 정유 공정 탑 상부의 부식 메커니즘을 분석한 결과, 부식에 가장 큰 영향을 미치는 네 가지 성분인 $H_2S$, $CO_2$, $H^+$, $Cl^-$을 고려하여 예측 모델을 개발하였다. 부식 메커니즘을 해석하는 데에 이동 현상 및 반응 공학의 관점으로 접근하여 모델을 개발 하였다. 또한 실제 정유공장에서 측정된 데이터들을 토대로 그 신뢰성을 검증하였다.

전기분해 염소소독공정의 반응표면분석법을 이용한 차아염소산나트륨 발생 최적화 (Application of Response Surface Methodology to Optimize the Performance of the Electro-Chlorination Process)

  • 주재현;박찬규
    • 한국환경보건학회지
    • /
    • 제48권3호
    • /
    • pp.167-175
    • /
    • 2022
  • Background: Disinfection is essential to provide drinking water from a water source. The disinfection process mainly consists of the use of chlorine and ozone, but when chlorine is used as a disinfectant, the problem of disinfection by-products arises. In order to resolve the issue of disinfection by-products, electro-chlorination technology that produces chlorine-based disinfectants from salt water through electrochemical principles should be applied. Objectives: This study surveys the possibility of optimally producing active chlorine from synthetic NaCl solutions using an electro-chlorination system through RSM. Methods: Response surface methodology (RSM) has been used for modeling and optimizing a variety of water and wastewater treatment processes. This study surveys the possibility of optimally producing active chlorine from synthetic saline solutions using electrolysis through RSM. Various operating parameters, such as distance of electrodes, sodium chloride concentration, electrical potential, and electrolysis time were evaluated. Results: Various operating parameters, such as distance of electrodes, sodium chloride concentration, electrical potential, and electrolysis time were evaluated. A central composite design (CCD) was applied to determine the optimal experimental factors for chlorine production. Conclusions: The concentration of the synthetic NaCl solution and the distance between electrodes had the greatest influence on the generation of hypochlorite disinfectant. The closer the distance between the electrodes and the higher the concentration of the synthetic NaCl solution, the more hypochlorous acid disinfectant was produced.