• Solar Energy
• /
• v.18 no.3
• /
• pp.15-24
• /
• 1998

There are mainly 3 heat losses from solar collector; top, bottom, and edge heat loss. Usually edge heat loss is small so that could be neglected. Of the total thermal losses occurring in a flat plate solar collector, top loss heat losses are dominant. Therefore it is necessary to calculate the top loss coefficient accurately in order to find out performance of solar collector. The flat plate solar collector(regenerator in summer) used in this study was made for year-round all conditioning. In order to find out collector efficiency for heating in winter without a system change, outdoor experiment was done. The top loss coefficient of this collector was about 3 to $4.5W/m^2^{\circ}C$. Futhermore use of selective coating in trickling surface can improve a performance of flat plate solar collector.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.105-111
• /
• 2013

The present study has been carried out to reduce the heat loss from a built in refrigerator by using reverse heat loss method to discern the region with larger heat loss. To perform this purpose, an infrared thermographic camera has been used to measure the surface temperature of the refrigerator and tried to improve the heat loss near the ice dispenser. The numerical heat transfer analysis also has been accomplished to clarify the heat transfer mechanism near the ice dispenser. The possible applicable method to reduce heat loss was increasing the curvature radius at the ice dispenser corner. The curvature radius has been changed from 0mm to 40mm to see the effect of the curvature at the corner. From the present research, the optimal curvature radius for the reduction of heat loss at the ice dispenser could be 30mm.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.317-322
• /
• 1996

고온으로 유지되는 원자로에는 열손실을 줄이기 위하여 단열재가 설치되어 있다. 일반직으로 열손실 시험에서 나타난 실제 열손실은 설계상의 열손실보다 크며, 이의 원인은 단열설계의 부적절, 단열재 설치상의 미흡 등에 기인한다. 본 연구에서는 단열재 두께와 간격에 대한 열전달 특성을 분석하여 단열설계변수를 최적화하며, chimney effect에 의한 열손실 증가를 정량적으로 분석하였다. 본 연구의 결과는 원자로용기 뿐아니라 가압기, 증기발생기 등의 큰 규모의 단열재 설계에 적용될 수 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.349-356
• /
• 1986

For the extension of application in flash method measuring the thermophysical properties of materials, the heat diffusion equation with the heat transfer loss from front, rear, and circumferential surfaces of two layer cylinderical sample is mathematically analyzed by means of Green's function for axially symmetric pulse heating on the front of samples. The solutions are applied to determine the unknown thermal diffusivity of the two materials and analyzed the measurement error due to heat loss and finite pulse time effects.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.35-41
• /
• 2014

The present study has been carried out to reduce the heat loss from a refrigerator by numerical heat transfer analysis and temperature measurement experiment for the verification of heat transfer analysis result. To perform this purpose, two dimensional heat transfer analysis and measurement of temperature on the surface of freezer for the horizontal cross sectional plane of a refrigerator has been accomplished. From the present study, it could be seen that the steel support in the mullion near gasket region has a heat transfer characteristics which transfer outside heat well from the high temperature hotline and outside air to the inner refrigerator. The effect of removing steel support on the reducing heat loss of a refrigerator was 24.8% and removing steel support might introduce significant improvement of refrigerator heat loss.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.7 no.3
• /
• pp.160-166
• /
• 1978

Heat loss to the ground in ondol heating system is analyzed mathematically using conformal mapping and variable transformations, Both two-and three-dimensional systems are analyzed. Heated house is assumed to be rectangular shape. Mean value of heat loss to the ground can be obtained using Figure 2. Effects of thermal parameters to heat loss are discussed. Numerical examples are also given.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.442-453
• /
• 2013

A large-scale high-temperature thermal energy storage(TES) was numerically modeled and the heat loss through storage tank walls was analyzed using a commercial code, FLAC3D. The operations of rock cavern type and above-ground type thermal energy storages with identical operating condition were simulated for a period of five consecutive years, in which it was assumed that the dominant heat transfer mechanism would be conduction in massive rock for the former and convection in the atmosphere for the latter. The variation of storage temperature resulting from periodic charging and discharging of thermal energy was considered in each simulation, and the effect of insulation thickness on the characteristics of heat loss was also examined. A comparison of the simulation results of different storage models presented that the heat loss rate of above-ground type TES was maintained constant over the operation period, while that of rock cavern type TES decreased rapidly in the early operation stage and tended to converge towards a certain value. The decrease in heat loss rate of rock cavern type TES can be attributed to the reduction in heat flux through storage tank walls followed by increase in surrounding rock mass temperature. The amount of cumulative heat loss from rock cavern type TES over a period of five-year operation was 72.7% of that from above-ground type TES. The heat loss rate of rock cavern type obtained in long-period operation showed less sensitive variations to insulation thickness than that of above-ground type TES.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.07a
• /
• pp.214-220
• /
• 1999

일반적으로 농산물의 박피작업의 목표는 박피된 농산물이 좋은 품질과 최소의 손실율로서 최대의 박피효율을 가지는 것이다. 밤의 화염박피 경우에는 제 1보 화염박피 특성에서 알 수 있듯이 박피율이 증가하면 화염박피 밤의 품질과 생율로 유통시에는 손실율과 밀접한 관계를 가지는 열침투 깊이도 증가한다. 이러한 열침투 깊이는 화염박피 밤의 사용용도에 따라 다르게 나타난다. 화염박피 밤을 생율로 유통시에는 열침투 부분을 제거해야 하므로 열침투 깊이가 적을수록 손실율이 적게 나타난다. 그러므로 생율로 유통시에는 손실율을 고려하여 열침투 깊이를 선정해야한다. 가공제품의 원료로 사용할 때에는 가공특성에 따라 열침투 깊이를 선정해야 한다. 쨈 등의 원료로 이용시에는 열침투 깊이가 커져도 사용 가능할 것이며, 박피밤 상태에서 당침투가 필요한 마론그랏세 등의 가공제품에서는 열침투 깊이를 제한할 필요가 있다. (중략)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1398-1407
• /
• 1992

The prediction of heat loss during laminar flame propagation was carried out by measurement of gas pressure and visualization of flame propagation in the constant volume combustion chamber. And to validate the prediction, the instantaneous temperature at wall of combustion chamber was also measured. Consequently, it was found that heat loss was increased according to increasing of maximum flame travel distance, but rate of heat loss for heat release during laminar flame propagation was nearly constant. And heat loss depends on heat transfer area which was contacted the wall by burned gas regardless to spark plug location.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.82-85
• /
• 2006

A trapezoidal fin with various lateral surface slopes is designed optimally by using one-dimensional analytic method. For four different convection characteristic numbers, the trend of heat loss as a function of fin tip length is shown. The optimum heat loss is somewhat arbitrarily chosen as 92% of the maximum heat loss. The optimum fin length corresponding to this optimum heat loss versus convection characteristic number is presented. The optimum effectiveness and specific effectiveness is presented as a function fin shape factor.