• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.459-470
• /
• 2018

Cellulose nitrates were used for folklore artifacts(ornamental beads and pipes in hatstrings, frames of eyeglasses, ornamental eyeglass cases, headband ornaments, and jeogori buttons) between the 19th and 20th centuries; however, they are susceptible to cracking, crazing, embrittlement, and crumbling due to deterioration. To consolidate and adhere deteriorated cellulose nitrate folklore artifacts, water-soluble acrylic emulsion adhesives were investigated. For consolidation, Plextol D 498, which has the lowest viscosity in low concentrations, was used. In adhesive films whose glass transition temperature(Tg) is lower than room temperature, the tensile stress and modulus decreased and the strain increased; therefore, the flexibility was high. The Plextol D 498 and Plextol D 498 and Dispersion K 52 films maintained their adhesiveness and flexibility after artificial-sunlight-accelerated ageing, and Plextol D 498 and Dispersion K 52 films hardly caused yellowing. Plextol D 498 was the most stable for accelerating ageing. A low concentration of Plextol D 498 emulsion resulted in the best permeability on the surface of cellulose nitrate, compared with other acrylic emulsions. To prevent ornamental hatstrings from cracking, crazing, embrittlement, and crumbling, a Plextol D 498 emulsion was used. After applying low concentrations(1%, 3%) of the emulsion to consolidate the fragments and high concentration to adhere the fragments, the ornamental hatstrings were protected from crumbling by deterioration, and their fragments were well-adhered. To preserve it from deterioration by oxygen and humidity, the treated ornament was sealed with an oxygen-barrier film using a low-humidity oxygen scavenger.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.1-6
• /
• 2004

In this study, heat and discharge treatments are arbitrary simulated for finding out the initiations and processes of surface degradation on the surface of polymer for using as a PCB substrate. Thermal-treatment changed the surface to the hydrophobic one with the increase of contact angle and surface potential decay, respectively. The XPS spectrum showed that the increased hydrophobicity in thermal treatment was originated from the continuous decrease of side-chains caused by secessions of oxygen groups and the increase of unsaturated double bond in carbon chains. Also, thermal-treatment caused the discoloration on the point of treated surface. These phenomena were attributed to the generation of ether group. In the chemical change by discharge treatment, a lot of side-chains occurred on the treated surface, and so the hydrophilicity increased as time elapsed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.549-555
• /
• 2001

Ultrasonic is a powerful nondestructive technique for getting the information of flaws and material properties of in-services facilities. We prepared 4 different 1Cr-1Mo-0.25V specimens by Isothermal aging at $630^{\circ}C$. We evaluated material degradation using ultrasonic parameters, velocity, attenuation and harmonic generation. Attenuation and nonlinear parameter derived from harmonic generation efficiency increased as degradation. Especially the second harmonic of the fundamental wave in the 1,820h aging material was observed to exceed 20dB more than that in the un-aged material. But velocity remained virtually the same for all specimens. We concluded that nonlinear parameter and attenuation are sensitive to material degradation, but velocity was not. It'll be a good parameter for evaluating the material degradation.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.12
• /
• pp.3265-3274
• /
• 1998

본 논문에서는 인간의 칼랄 인식 특성인 명도, 채도 및 색조의 관계를 학습시킨 신경회로망을 이용하여 열화된 영상의 채도 부분을 향상하는 칼라영상향상법으 제안하였다. 제안한 방법은 우선 표준영상으로부터 여러 단계 열화된 영상들로부터 얻은 다양한 명도, 채도 및 색조의 관계를 신경회로망의 입력으로 하고 표준영상의 채도를 목표차로 해서 신경회로망을 학습시킨다. 그리고 이렇게 학습된 신경회로망에 열화된 영상의 명도, 채도, 색조 그리고 향상시킨 명도를 입력하면 향상된 채도를 얻을 수 있는 칼라영상향상방법이다. 본 논문에서는 제안한 방법이 기존의 칼라영상향상법에서 가장 문제가 되었던 영상 향상 시 칼라범위를 초과하는 문제와 채도 향상비의 인위적 선택문제를 해결하고 채도의 대비를 향상시켜 선명한 영상을 얻을 수 있는 방법임을 밝혔다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.548-550
• /
• 2015

본 논문은 열화상 카메라와 가시광선 카메라를 사용하여 촬영한 영상에서 움직이는 객체에 대한 검출률을 비교한다. 각 카레라는 객체로부터 8m 떨어진 지점에 위치시켰으며, 촬영한 영상에 가우시안 필터만을 적용하여 객체를 검출하였다. 객체가 존재하는 구간에서 객체가 검출된 영상으로부터 검출률을 계산하였고, 두 개의 이동 물체로부터 얻은 영상에서 열화상 카메라와 가시광선 카메라에서 각각 98.6%와 55%의 검출률을 얻었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.397-399
• /
• 2021

한의사의 복진을 모사하는 진단기기와 이를 이용하여 질환과 변증을 분류하는 알고리즘을 개발하는 연구가 진행되고 있다. 본 연구에서 적외선 체열 영상과 접촉식 온도계로부터 구성되는 복부 영역별 체열 영상 시스템을 제시하였고, 복부 영역의 절대 온도를 보정하는 방법을 살펴보았다. 접촉식 온도계를 활용해 추가로 복부표면 온도를 측정하였고, 동시에 열화상 카메라로도 영상을 촬영하여, 동일위치에서 열화상 영상의 온도값과 접촉식 체온계의 온도값을 비교해 전체 열화상 영상을 보정하였다. ICC 값이 0.96으로 나와 높은 재현성을 보였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.47-53
• /
• 2012

Bonding strength of Sn-3.0Ag-0.5Cu solder joint due to degradation characteristic of OSP surface finish was investigated, compared with SnPb finish. The thickness variation and degradation mechanism of organic solderability preservative(OSP) coating were also analyzed with the number of reflow process. To analyze the degradation degree of solder joint strength, FR-4 PCB coated with OSP and SnPb were experienced preheat treatment as a function of reflow number from 1st to 6th pass, respectively. After 2012 chip resistors were soldered with Sn-3.0Ag-0.5Cu on the pre-heated PCB, the shear strength of solder joints was measured. The thickness of OSP increased with increase of the number of reflow pass by thermal degradation during the reflow process. It was also observed that the preservation effect of OSP decreased due to OSP degradation which led Cu pad oxidation. The mean shear strength of solder joints formed on the Cu pads finished with OSP and SnPb were 58.1 N and 62.2 N, respectively, through the pre-heating of 6 times. Although OSP was degraded with reflow process, the feasibility of its application was proven.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.3
• /
• pp.80-84
• /
• 2014

Dark channel prior means that, for undistorted outdoor images, at least one color channel of a pixel or its neighbors have values close to 0, and thus the prior can be used to estimate the amount of distortion for given distorted images. In other words, if an image is distorted by blur, its dark channel values are averaged with neighbor pixel values and thus increase. This paper proposes a method that estimates blur strengths by analyzing the variation of dark channel values caused by blur. Through experiments with images distorted by Gaussian and horizontal motion blur with given strengths, the usefulness of the proposed method is verified.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.953-955
• /
• 2016

Degradation is occurred in the process of the signal transmission in the image processing system due to various reasons. Degradation is noise addition in the image signal and the representative one to cause degradation is salt and pepper noise. Therefore, image restoring filter was suggested in this article to apply and process weighted value by the changes of each directional pixel upon breakdown of local mask with 8 directions in order to restore the damaged image in the environment of salt and pepper noise. In addition, peak signal to noise ratio (PSNR) was used to compare the existing method as the objective determinant standard of the improvement effect.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.697-702
• /
• 2001

Effects of ammonia treatment on the morphologies of the catalytic metal films and carbon nanotubes subsequently synthesized via a thermal chemical vapor deposition method were investigated. An optimally controlled thermo-chemical process of ammonia treatment gave rise to a morphology of a dense distribution of vertically aligned carbon nanotubes. $NH_3$ treatment is a crucial key process to obtain vertically aligned carbon nanotubes. However, it was realized by a simple $NH_3$ treatment during synthesis at temperatures of $800-900^{\circ}C$ without any extra process. The structure and morphology of carbon nanotubes were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy.