• Journal of Korean Society of Forest Science
• /
• v.71 no.1
• /
• pp.55-58
• /
• 1985

The anatomical diagnoses derived from the adventitious buds, the dimples, and their surroundings, which break out often in the Populus alba ${\times}$ P. glandulosa, were investigated by the light microscope. In the anatomical structure derived from the adventitious buds, the vessel seldom occured, the diameters of the cell were smaller and the wall thicknesses were thicker than those of the normal woods. The wood fibers around the adventitious buds were crooked, frequently had the septa, and the adjacent rays showed the multiple rows. The wood fibers of the dimples were extremely crooked from pith to the hark direction and the rays showed the multiple rows. The vessels in the line-like discoloration zone around the adventitious buds and the dimples formed the traumatic tyloses.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.264-269
• /
• 2017

To improve heating characteristics of graphite fibers, graphite fibers were copper-plated by electroless plating. The Cu-plated graphite fibers were investigated by thermos-gravimetric analysis in air to calculate quantities of copper on surface of graphite fiber according to plating time. Also, the surface temperature with applied voltage was observed by thermos-graphic camera using a strand of graphite fiber. According to the increment of plating time, the higher quantities of plated copper on graphite fiber were obtained. The electric conductivity of plated graphite fiber for 20 minutes was resulted in 1594.3 S/cm, and surface temperature of this sample showed the maximum temperature $57.2^{\circ}C$. These result could be attributed that copper having great electric conductivity are growing on graphite fiber and followed improving heating characteristics.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.53-60
• /
• 2020

This paper aims to examine the insulation performance of insulated gang form by changing the energy (power) consumption and concrete calorific value to assist in concrete protection in cold weather. According to the test results, the general gang form will generate three times the energy (power) consumption for 12 hours after the concrete is poured. In contrast, insulated gang foam consumed no energy (power) for 21 hours after pouring. The final power consumption was 3.7 times higher than that of the general gang form, confirming the improved performance of insulated gang form with regard to energy (power) consumption. The calorific value examination shows that the calorific value changes significantly according to the change of outside temperature after concrete placement in the case of the general gang form. However, in the case of the insulated gang form, only a slight heat loss occurred in the part of the frame, and it showed a constant heating pattern from the concrete casting to the demolding of the mold.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.31-39
• /
• 2007

In this paper, a system for real-time or periodic measurement and analysis of RF parameters such as forward transmit power and pilot power in CDMA base station systems is proposed. Such RF characteristic parameter measurement can be prevented from system fault and used to achieve optimal service quality and maximum investment return through cell coverage expansion, subscriber capacity increase and so on. For forward power measurement, the local oscillator frequency for the detector is varied so that the transmit power for all channels can be measured. The channel power measurement can be used to analyze the variation in transmit power for changes in voice traffic. By comparing to forward $E_c/I_o$, the pilot channel power can be deducted, which can be used to determine uy degradation in transmit section modules such as the high dover amplifier. Since an accurate analysis of carefully measured data using the CDMA level detector must be made, the system is designed so that measurement errors due to changes in crest factor with modulation method can be overcome.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.2
• /
• pp.11-21
• /
• 2002

Although the matching Pursuit is effective for video coding at low bit rate, it has a Problem since it needs much more calculation than the conventional block-based video coding method. The proposed fast matching pursuit method reduces inner product calculation that takes the most part of entire calculation by utilizing the symmetry of the absolute values of the one-dimensional Gator dictionary bases, the modified dictionary which allows faster matching without causing image quality degradation, and a Property of the two-dimensional Gabor dictionary that can be grouped in advance to four classes according to its frequency characteristics. Proposed method needs only about 1/8 of multiplications compared to the well-known separability-based fast method proposed by Neff.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.167-174
• /
• 2007

This study proposes a practical and realistic method to establish an optimal lifetime maintenance strategy for deteriorating bridges by considering the life-cycle performance as well as the life-cycle cost. The proposed method offers a set of optimal tradeoff maintenance scenarios among other conflicting objectives, such as minimizing cost and maximizing performance. A genetic algorithm is used to generate a set of maintenance scenarios that is a multi-objective combinatorial optimization problem related to the and the life-cycle cost and performance as separate objective functions. A computer program, which generates optimal maintenance scenarios, was developed based on the proposed method. The subordinate relation between bridge members has been considered to decide optimal maintenance sequence. The developed program has been used to present a procedure for finding an optimal maintenance scenario for steel-girder bridges on the Korean National Road. Through this bridge maintenance scenario analysis, it is expected that the developed method and program can be effectively used to allow bridge managers an optimal maintenance strategy satisfying various constraints and requirements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.839-847
• /
• 2000

A digital subscriber line(DSL) has been introduced recently in home and abroad to deliver high speed Internet access services with the large channel and the sheer number of subscribers. It has been processed to standardize the DSL in our country, but the analysis on the DSL is limited to the field trials. Therefore, in this paper we have proposed the techniques related to analysis on the performances of DSL, and estimated its S/N and BER performances. In particular, the channel capacity gained from S/N values was compared with the field trial results in Japn and it was known that the results from this study was proved to be valid. Also, the S/N performance of DSL is degraded due to only Gaussian noise, and BER performance degraded greatly with both the higher frequency and the longer distance. However, results of this analysis can be used as the basic data in specifying the standardization of DSL in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.9
• /
• pp.798-809
• /
• 2013

In this paper, we propose robust relay and destination filter design methods for the multi-user peer-to-peer amplify-and-forward relaying systems while taking imperfect channel knowledge into consideration. Specifically, the relay and destination filter sets are developed to minimize the sum mean-squared-error (MSE). We first present a robust joint optimum relay and destination filter calculation method with an iterative algorithm. Motivated by the need to reduce computational complexity of the iterative scheme, we then formulate a simplified sum MSE minimization problem using the relay filter decomposability, which lead to two robust sub-optimum non-iterative design methods. Finally, we propose robust modified destination filter design methods which require only local channel state information between relay node and a specific destination node. The analysis and simulation results verify that, compared with the optimum iterative method, the proposed non-iterative schemes suffer a marginal loss in performance while enjoying significantly improved implementation efficiencies. Also it is confirmed that the proposed robust filter design methods provide desired robustness in the presence of channel uncertainty.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.408-414
• /
• 1999

In this paper, we propose the method using coherent detection with time division multiple pilot signal for each users I reverse CDMA channel as the structure of reverse CDMA channel to apply CDMA to upstream channel of bidirectional LMDS. By using coherent detection with pilot signal in reverse CDMA channel, capacity can be improved when compared with noncoherent detection, but it is required to allocate pilot signal for all user. And then interference is increased due to allocate continuously the pilot signals. In this case channel capacity is decreased. The method f pilot allocation is needed that reduce this interference and keep synchronization effect using coherent detection, In the reverse link, the pilot allocated to each users at different time and not overlapped is possible solution for it. this pilot is proposed and analyzed its performance and capacity. The result is that proposed method has more increased capacity compared wit others.

• Fire Science and Engineering
• /
• v.26 no.4
• /
• pp.82-88
• /
• 2012

To analyze the thermal characteristics of wire connection part that is connected to a screw-clamping terminal block depending on screw torque, the normal screw torque defined in KS C 2625 and the abnormal screw torque that can occur due to loosened screws resulting from defective work or aged deterioration were used as experimental variables. After the same load was applied to normal and abnormal screw torques, the thermal characteristics of the wire connector were measured and compared with a thermal imaging camera. The findings from this study will be used to detect heating due to defective screw torque at terminal block connections during electric safety inspection in the future and minimize the hazard of electric fire.