• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.19-22
• /
• 2003

The purpose of this study is to analyze the curing effect of planar surface heater for concreting in cold weather. Some experiments were conducted to evaluate the temperature history of concrete structures cured with heating sheets. Results are as follows ; (1) The temperature of concrete showed continuously rising trend with the heating by planar surface heater under the cold environmental condition of 3~-12$^{\circ}C$. And after about 24 hours the maximum temperature of concrete was reached at 25~3$0^{\circ}C$. (2) The temperature of slab concrete heated by planar surface heater of 130W/$m^2$ was at least $25^{\circ}C$ higher than that of an exterior air, and the curing performance was much more effective than heating by hot wind machine. (3) Through the curing by planar surface heater for 48 hours, the concrete maturity of about 1.5 times to heating by hot wind machine was acquired.

• Journal of Digital Contents Society
• /
• v.10 no.1
• /
• pp.159-168
• /
• 2009

Recently, the mobile retention and use rates for the children are increasing. And early-childhood english education is all the rage. Thus, we propose a mobile contents for studying english stories of children. The proposed content provides children with studying english via a mobile phone in anywhere, anytime. We call the proposed contents "ShK". ShK is an abbreviation for "Say, hi Kids!". ShK induces a motive and interest about studying through a storytelling and avatars. And parents of students can manage studying contents of children through a private web site. Thus, "Say, hi Kids!" will became the epochal ubiquitous english educational contents for children.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.505-511
• /
• 2014

In this paper, silver pastes were printed on polyethylene terephthalate (PET) film using screen printing and evaluated the drying characteristics by using dry oven and NIR drying system. The printed Ag films were dried at $140^{\circ}C$ and the drying time was changed from 10 to 90 seconds. To evaluate the electrical properties of printed Ag film, sheet resistance was compared. The sheet resistance of the dried thin silver film by using NIR drying system more rapidly decreased. To clarify this phenomena, the morphology and component of the dried surfaces were measured by using the scanning electron microscope (SEM) and the energy dispersive X-ray Spectroscopy (EDX), respectively. In the EDX measurement results, the oxidation of the surface was observed in the dried thin film by using the dry oven. The NIR drying system is more applicable than conventional hot air drying to apply continuous printing system.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.75-81
• /
• 2011

An indirect concept and method is proposed to predict the paint dry time at the inside wall of ship block. To implement this concept on computer program, optimal hot air supply-exhaust system of paint dry facility was designed by CFD simulation and experiment was performed to get the paint dry time curve according to various paint dry conditions. After combining the block inside environment from the simulation results and the paint dry time prediction curve from the curve-fitting of experimental result, the GUI program which can be executed in general PC OS has been finally developed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.2
• /
• pp.267-273
• /
• 1996

열풍건조 전 전처리로서 $50^{\circ}C의$ 2%(w/v)가용성 전분용액에서 20분간 침지를 한 처리구와 건조 후 분말 입자크기가 $40^{\circ}C,$ 90%RH의 저장 중 분말양파의 물리적 성질에 미치는 영향을 조사하였다. 저장 중 수분흡수는 처리구와 대조구 모두 분말양파의 입자 크기에 관계없이 저장 초기에 빠르게 이루어진 후 저장시간이 지남에 따라서 둔화되었다. 처리구가 대조구에 비하여 저장중 수분흡수가 작게 나타났다. 처리구의 경우 분말입자가 큰 -24+60 mesh의 수분흡수는 저장 6시간 후 처리구와 대조구의 덩어리 형성 정도는 각각 12.26과 60.1%이었다. 입자 크기에 다른 덩어리 형성 정도는 처리구에서 저장 1시간 후 2.28%과 23.6%로 나타났다. 겉보기 밀도에서는 처리구가 대조구에 비하여 전반적으로 높은 값을 나타내었으며 처리구의 경우 수분흡수가 0.03에서 0.12g수분/g고형분으로 늘어남에 따라서 겉보기 밀도는 입자가 큰 분말은 0.49에서 0.38g/㎤이였으며 입자가 작은 분말은 0.31에서 0.29g/㎤로 나타났다. 압축성에서는 입자 크기가 크고, 수분흡수가 많이 이루어진 분말일수록 도한 대조구가 처리구 보다 응집성질을 가지게 되므로 높은 값을 나타내었다. 이완상수에서는 입자가 큰 처리구의 경우 수분흡수가 3.0과 12.1%이루어 진 것을 비교하면 각각 2.45와 2.01로 나타났다. 이는, 수분흡수가 높아짐에 따라서 고체 성질이 줄어들게 됨으로써 이완상수값이 낮아지기 때문이다.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.58-66
• /
• 2016

This study was performed to investigate drying characteristics and quality properties of dried persimmon with vacuum drying process. Drying characteristic curve of the dried persimmon showed that the constant rate drying period and falling rate drying period exist definitely. $_{\circ}Brix$, sugar content and hardness value of the dried persimmon increased as the vacuum pressure and heating temperature increased, but L value of the dried persimmon lower. The results indicated that the optimal conditions were at vacuum pressure of 40~50kPa abs., heating temperature of $30^{\circ}C$ and drying time of 3~4days.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.127-130
• /
• 2013

Apple's iPhone was released and the SmartPhone craze started in the world. Then, Many kind of SmartPhone released on the market, the number of subscribers increased explosively for the convenience of SmartPhone. By SmartPhone users increases rapidly, the number of Malware targeting SmartPhones increased explosively. The SmartPhone Malware, tend to increase explosively in 2012 beginning to be discovered in earnest from the second half of 2011, and is continuously increasing even now. In this paper, describes the status and trends of SmartPhone Malware, through the analysis of trends in the SmartPhone Malware, we describe the future prospects of SmartPhone Malware.

• Resources Recycling
• /
• v.24 no.6
• /
• pp.54-60
• /
• 2015

The objective of this study is to develop a belt-type dryer with a capacity of 1 ton/day, thereby improving drying efficiency by more than 70% and reducing the size of dryers by more than 50%, and thus making dryers smaller and lighter to reduce the installation and operation costs by more than 20%. We identified structural improvements by analyzing existing dryers employing indirect heating and verified the superior drying performance of the proposed method through some basic experiments. Furthermore, we verified the improvements in the heat transfer and drying characteristics as we conducted the experiments at reduced pressure.

• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.7-13
• /
• 2007

Numerical analysis is carried out for combined heat transfer in an indirected NIR(Near Infrared Ray) heating chamber. Reynolds number and shapes of absorbed cylinder are known as important parameters on the combined heat transfer effects. Reynolds number based on the outer diameter of the cylinder is varied from $10^3$ to $3{\times}10^5$. Four difference heat transfer regimes are observed: forced convection and radiative heat transfer on the outer surface of the cylinder, pure conduction in the cylinder body, pure natural convection and radiation between lamp surface and inner surface of the cylinder, and radiation from the lamp. Flow and temperature characteristics are presented with iso-contour lines for the absorbed circular and elliptic cylinders to compare their differences. The convective and radiative heat transfer fluxes are also compared with different Reynolds numbers. As usual, Reynolds number is an important factor to estimate increasing convective heat transfer as it increases. The shape of absorbed cylinder results overall heat transfer rates remain unchanged.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.349-354
• /
• 2002

쌀 소비량은 생활 수준 향상과 외식 및 식품 산업의 발달로 감소하고, 고품질 쌀을 요구하는 성향이 높아지고 있다. 현재, 고품질 쌀을 생산할 수 있는 기술과 제반 요건은 구비되어 있으나, 수확 후 건조·저장 중에 쌀의 품질이 저하된다. 특히 건조 중 품질 저하는 고온건조에 의한 동할 발생 및 과건조가 주요 원인이다. 이를 해결하기 위해 원적외선 건조 시스템에 관한 연구가 진행 중이다. 본 연구에서는 방사율이 높고, 접착성 및 내열성 등이 강한 곡물 건조기용 방사체 코팅원료를 개발하고, 이 원료를 원적외선 방사체에 코팅한 후 방사체의 형태와 크기에 따라 표면 온도 분포 및 연료 소비량 등을 측정 분석하여 방사체의 특성과 적정 조건을 규명하고자 하였다. 연구 결과를 요약하면 다음과 같다. (1) 세라믹 코팅 원료의 배합비는 세라믹분말 40%와 결합재 60%가 접착력과 가열경화 후 표면이 양호한 것으로 나타났다. (2) 노즐의 유량 및 분무각에 따른 버너의 화염길이 및 폭은 노즐유량이 증가함에 따라 증가하는 경향을 나타내었다. (3) 방사체 위치별 표면온도편차는 방사체 길이가 1350mm인 것이 작은 것으로 나타났고, 열풍유동관 직경이 Rounding type의 경우 76.3mm, Right angle type의 경우 89.1mm일 때 표면 온도편차가 적었다. (4) 연료소비량은 열 풍유동관 직경이 클수록, 방사체 길이가 길수록 증가하는 경향을 나타내었고, Right angle type이 Rounding type에 비하여 연료소비량이 약간 높은 것으로 나타났다.