• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.74-82
• /
• 2014

For this research, prepared ammonium dihydrogen phosphate aqueous solution and polyurethane dispersion. Use these resin, this article has been analyzed about change of mechanical properties by increasing amount of ammonium dihydrogen phosphate aqueous solution in polyurethan resin on coated leather and dried film. According to measure data for solvent resistance, DPU(polyurethane dispersion) resin and DPU-AD1, D2, D3(samples of polyurethaneresin with ammonium dihydrogen phosphate aqueous solution) had good property. As known in the results, increase of ammonium dihydrogen phosphate constant did not influence to big change of polyurethane resin properties. As test of tensile strength, DPU had highest tensile characteristic($3.114kg_f/mm^2$) and DPU-AD3 had lowest tensile characteristic($2.510kg_f/mm^2$). As same as tensile characteristic, abrasion test determined DPU(50.5 mg.loss) had highest properties. In elongation case, DPU had best properties(602 %) in this experiment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.27-32
• /
• 1994

For the improvement of seasoned kelp products, their processing conditions were examined. To find the optimal processing conditions for seasoned kelp, kelp was prepared by cooking for 0.5, 1.0, 2.0, 3.0 and 4.0 hrs at $80^{\circ}C$ in seasoning solution which contained $20\%$ sugar, $11\%$ sorbitol, $3.5\%$ NaCl and $1.6\%$ MSG. The penetration of seasonings into kelp increased with cooking time. Improved texture and seasoning penetration was achieved by using $3\%$ acetic acid in the seasoning solution. The seasoning component contents of the kelp seasoned varied within the following ranges: sugar $0.150{\sim}0.182\%$, sorbitol $0.085{\sim}0.127\%$, acetic acid $0.015{\sim}0.019\%$, MSG $0.21{\sim}0.37\%$, NaCl $0.30{\sim}0.40\%$, fructose $0.009{\sim}0.024\%$ and glucose $0.003{\sim}0.031\%$, respectively. Fructose and glucose were measured in seasoned kelp treated with acetic acid. Water activity of seasoned kelp varied from 0.36 to 0.48 according to seasoning composition.

• Korean journal of food and cookery science
• /
• v.27 no.5
• /
• pp.589-597
• /
• 2011

This study was performed to evaluate the physiological and sensory properties of breads with different ratios of persimmon peel. Moisture activation of the bread loaf decreased as storage period increased with a smaller range of decrease in the persimmon peel added group. The amount of weight increased, and volume fell to some degree. Adding persimmon peel increased the RVA temperature, whereas maximum decreased. The color change during storage was due to the addition of control and 4% in group a values except there was no significant difference. As the result of measurements using a texture analyzer, hardness, springiness, cohesiveness, gumminess, and chewiness properties decreased. The sensory test results revealed that the 4% and 6% added persimmon peel bread was the best.

• Food Science and Preservation
• /
• v.9 no.4
• /
• pp.418-424
• /
• 2002

This study was undertaken to develop the optimum baking formular and process in making the improved soy-wheat composite breads furtified with soy flour, which has been known for a source of biologically active phytochemicals and for more vegetable proteins as well. The effects of the addition of soy flour on a rheological properties of dough, on the sensory characteristics of breads, and on the possibilities of commercialization of these functional breads were investigated. As the added amount of soy flour increased, water absorption, development time and the weakness value of dough were increased, but dough stability were decreased in the farinograph. In the extensograph, the more soy flour was added, the less the extensibility and the resistance to extention were shown. As the amount of soy flour increased, gelatinazation point was increased in the amylograph, but the maxium viscosity was decreased. As the added amount of soy flour was increased, b value(yellowness) was obviously increased, L value(lightness) was slightly decreased. However, a value(redness) was not nearly changed in the color of cut loaves. In sensory evaluation, the more soy flour was added, the less the external, the internal characteristics and the eating qualities were shown. Accorting to the addition of soy flour, the toughness and the brittleness tended to be increased proportionally. The dough of 10% soy-wheat composite flour(SF10) was the most favorable on the baking performance.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1549-1556
• /
• 1999

This study was conducted to investigate the effects of pre-treated sub-ingredients and deodorization materials on the smell intensity of Kimchi during fermentation.Among the various sub-ingredients of Kimchi, garlic, ginger and green onion have comparatively strong smell. The smell intensities of the sub-ingredients, which were pre-treated with various patented methods were examined using the sensory evaluation method and AromaScan. The results showed that the good methods to reduce the smell of sub-ingredients were hot air drying and soaking with heating treatment. The pH, titratable acidity and the number of microorganism of Kimchi prepared with pre-treated sub-ingredients were not different among samples during fermentation. The smell intensity of the Kimchi with pre-treated sub-ingredients was weaker than that of control until ten fermentation days, but the smell intensity after 10 days of fermentation was not different among samples. The addition of ${\alpha}-cyclodextrin\;and\;{\beta}-cyclodextrin$, which are known to have deodorization effect, at a level of 0.1% respectively, to Kimchi resulted in no difference in the pH, titratable acidity and smell intensity during fermentation at $10^{\circ}C$ compared to those of control Kimchi. However, the addition of deodorizer reduced sulfide classes such as methyl allyl sulfide, dimethyl disulfide, allyl sulfide, methyl propyl disulfide up to 50%.

• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.21-26
• /
• 2009

Polycyclic aromatic hydrocarbon(PAH) contents were evaluated in sesame oils from sesame seeds of different origins and in commercial samples using HPLC with fluorescence detection. The sesame seeds, which had been harvested from India, China, and Korea, were roasted at $250^{\circ}C$ for 25 min, and the commercial sesame oils were purchased from a local market. The recoveries for eight PAHs spiked into the sesame oils ranged from 80.2 to 99.2%. The mean levels of total PAHs in the sesame oils harvested from China, Korea, and India were 3.97, 1.57, and 1.20 ${\mu}g$/kg, respectively. The PAH contents in the commercial sesame oils ranged from 0.79 to 2.15 ${\mu}g$/kg.

• Food Science of Animal Resources
• /
• v.29 no.3
• /
• pp.334-339
• /
• 2009

This study was carried out to determine the effects of olive-oil prepared tomato powder (OPTP) and lycopene on seasoned raw pork. 1.5% OPTP was added in T1 and 3.0% in T2; and 0.03% refining lycopene was added in T3. While in storage, pH values of the treated samples were lower (p<0.05) than those of the control samples. Upon increasing storage, salinity values of OPTP samples increased as well, however, the values of T3 did not change. There were significantly higher TBARS values observed in the OPTP samples compared to control, but no significant difference between T3 and the control samples in TBARS values during storage. VBN values of T2 samples were lower than that of other samples at Day 3 and Day 6 of storage. At Day 9 however, the VBN values of T1 and T2 were significantly higher than those of the control and T3. There was no significant difference between the control and the treated samples in the total plate counts. There were relatively higher redness, yellowness and chromatic values observed in the treated samples than in control. In sensory evaluation, there was no significant difference between the control and the treated samples in color, tenderness, juiciness and overall acceptability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.4
• /
• pp.382-386
• /
• 1983

In order to utilize effectively sea mustard(Undaria pinnatifida) which is excellent in nutrition and medical action, powdered sea mustard juice was prepared and then its chemical composition and the stability of pigments were examined. Powdered sea mustard was made by washing fresh sea mustard with tap water to remove clay and sand, blanching at $85^{\circ}C$ for 20 sec in mixing solution(3% salt+1% $MgCO_3$), hot air drying($50-55^{\circ}C$, 3 hrs) after draining and pulverizing dried sea mustard to 200mesh. And then powdered sea mustard mixtures for juice type beverage was made by adding 0.75% of salt, 1.25% of sugar, 0.2% of ascorbic acid, 0.25% of flour of roasted barley and 0.8% of pulverized sea mustard to 100ml of water. Chemical composition of product was not scarcely changed during processing while amino-nitrogen content was increased and alginic acid and ash contents were decreased. The retention of chlorophyll and total carotenoid pigments of product against fresh sea mustard were 91.6% and 89.5% respectively. Judging from sensory evaluation, color, flavor, taste and dispersibility of powdered sea mustard juice were excellent and undesirable flavor of product was masked by addition of flour of roasted barley.

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.244-248
• /
• 2013

This study was carried out to investigate the residual characteristics and calculate processing factor of the environment friendly material matrine in fresh chilli pepper by drying. Spray solution of matrine was prepared by dilution of the commercial product (2% active ingredient) with water at 1 : 1000 (v/v) ratio and sprayed onto chilli pepper plants at seven day intervals. Samples were collected at 0, 1, 3, 5 and 7 days after last application and then dried using a hot air dry oven at $60^{\circ}C$ for 36 hours until the water content was reduced to 14%. Recoveries and storage period stabilities of matrine in the samples ranged from 106.6 to 119.1% and 106.6 to 113.1%, respectively. The residual concentrations of matrine in fresh chilli pepper and dried chilli peppers treated only once were found to be from less than 0.01 to 0.11 and from 0.03 to 0.25 mg/kg, respectively. In case of plants sprayed twice with matrine, the residual concentrations ranged from 0.02 to 0.12 and from 0.04 to 0.4 mg/kg, respectively. Processing factor of matrine in the fresh chilli pepper by drying was found to be from 1.5 to 3.3, indicating that the residual concentration of matrine in dried chilli pepper increased about two or three times by drying.

• Journal of Life Science
• /
• v.27 no.7
• /
• pp.754-759
• /
• 2017

The 100 l culture system was made on the basis of LED light, and Nannochloropsis oculata was cultured in f/2 medium at light intensity ($100{\mu}mol/m^2/s$), culture temperature ($20^{\circ}C{\pm}1^{\circ}C$) and LD cycle (12hr). As a result, the maximum biomass of 1.07 g/l was cultured as a result of 100 l mass culture at $100{\mu}mol/m^2/s$ and 24 mg/l nitrate concentration in LED blue (475 nm). The extraction was carried out using sonicator, homogenizer and chemical method 0.5M HCl shredding method. The contents of chlorophyll a, chlorophyll b and carotenoid were 1.6, 0.5 and 0.3 mg/g cell. When using homogenizer, it was measured at 1.0, 0.6 and 0.2 mg/g cell. The chemical breakdown method of 0.5M HCl, chlorophyll a, b, and carotenoid contents were measured as 0.9, 0.8, 0 mg/g cell. The highest amount of biomass during the distruption time was measured at 3.6 mg/g cell at 15 min disintegration and acetone, 3.6 mg/g cell of acetone, methanol, and ethanol were measured as effective solvents. Concentration was measured by using microfilter, disk type continuous centrifuge and tubular type continuous centrifuge were 16.0, 1.1 and 0.5 g/l, respectively. Four kinds of equipment such as hot air dryer, vacuum dryer, spray dryer and freeze dryer were tested to optimize the drying process. As a result, the recovery rates of spray dryer and freeze dryer were 80% and 60%.