• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.4
• /
• pp.431-439
• /
• 1998

Falling film absorption process is an important problem in application such as absorption chillers. The presence of waves on the film affects the absorption process significantly. In the present study the characteristics of heat and mass transfer in laminar-wavy falling film were studied numerically. The wavy flow behavior was incorporated in the energy and diffusion equation. The numerical solution indicated that the interfacial wave increased the transfer rates remarkably. Interfacial shear stress and wave frequency seemed to be the dominant factors on the film Nusselt number and Sherwood number in the wavy film. A comparison of the transfer rates of the wavy film to that of the smooth film showed that the mass transfer rate could be increased by more than 50%.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.267-273
• /
• 2004

This paper targets to define controlling factors of pressure-coupled combustion response and estimate their effects on droplet evaporation process. Dynamic characteristics of hydrocarbon propellant vaporization perturbed by acoustic pressure are numerically simulated and analyzed. 1-D droplet model including phase equilibrium between two phases is applied and acoustic wave is expressed by harmonic function. Effects of various design factors and acoustic pressure on combustion response are investigated with parametric studies. Results show that driving frequency of acoustic perturbation and ambient pressure have important roles in determining magnitude and phase of combustion response. On the other hand, other parameters such as gas temperature, initial droplet size and temperature, and amplitude of acoustic wave cause only minor changes to magnitude of combustion response. Resultant changes in phase of heat of vaporization and thermal wave in droplet highly influence magnitude and phase of combustion response.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.176-178
• /
• 2000

대기경계층내에서의 흐름은 평균류, 난류(Turbulence) 그리고 파동(wave) 3가지로 분류되는데 수평적으로 수 ms$^{-1}$ 연직적으로 수 cms$^{-1}$의 평균류에 의해서 수중기, 운동량, 열, 오염물질의 수송이 일어나며 이것들은 난류에 의해서 연직적 수송이 일어 난다. 그리고 평균류의 시어(shear)나 평균류가 장애물을 만나면서 형성되는 파동에 의해서 운동량, 에너지 등의 수송이 이루어진다(Stull., 1988). (중략)

• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 2013.03a
• /
• pp.59-62
• /
• 2013

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.167-174
• /
• 2008

Number of long-span bridge construction has been increased recently so that seismic consideration of design has become significant. To adapt such significance to design, seismic design in the newly revised 'Cable Steel Bridge Design Handbook' specifies some of wave travelling effect and local site effect. In this study, a cable-stayed bridge with main span of 500m is analysed having variables of uniform excitation, wave travelling effect, and wave travelling effect plus local site effect. Result shows that wave travelling effect in cable-stayed bridge affects considerably to its seismic response under weak soil condition even though the span length is relatively short. What's more, regardless of soil type, the seismic response has become higher for analysis with wave travelling effect and local site effect than with wave travelling effect only. Consequently, in seismic response analysis of long-span bridge, consideration should be given to application of wave travelling effect and local site effect.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.05a
• /
• pp.11-12
• /
• 1993

70년대 석유파동이후 급격히 증가되던 태양에너지 이용 기술개발에 대한 관심이 80년대 들어 석유가격의 안정세와 더불어 서서히 식어가기 시작하였으며, 심지어 어떤 이들은 태양에너지는 실용화가 안 되는 기술이라는 선입견을 가지고 경제성이 확보될 때까지 기다려야 한다는 말을 하기도 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.7
• /
• pp.545-553
• /
• 2003

This paper is concerned with protecting piezoelectric transducers used in an ultrasonic flowmeter from the high temperature of hot fluid in a pipe by using a waveguide and with improving the propagation of ultrasonic longitudinal vibration in the waveguide. Waveguide material has been chosen for efficient insulation of heat transferred in the waveguide, and the minimum length of the waveguide for protecting piezoelectric transducer has been estimated. Forced response of the longitudinal vibration in a uniform circular rod has been obtained and the length of the waveguide has been selected for maximum amplitude. Longitudinal vibration response of a conically-tapered rod excited at a natural frequency has been obtained to confirm that wave motion is amplified as the cross-sectional size of the waveguide decreases along the axial direction. The fact that dispersion of a pulse wave in a waveguide is reduced as the cross-sectional radius is decreased has been examined theoretically and confirmed experimentally by using a single-rod waveguide. A bundle-type waveguide has proven to be a practical one through the evaluation of the wave propagation performance.

• Environmental and Resource Economics Review
• /
• v.5 no.2
• /
• pp.185-202
• /
• 1996

일반적으로 국민경제의 상태를 평가할 때, 경제성장, 물가상승률, 고용사정 및 국제수지 등 각 부문의 성과를 종합적으로 고려한다. 이들 각 부문의 성과는 개선되거나 악화되는데 있어서 동일한 추세를 보이기도 하지만 서로 상반된 움직임을 보이기도 한다. 또한 각 부문간에는 상충관계가 존재하기도 하므로, 부문간의 조화를 달성하기가 매우 어렵다는 사실도 잘 알려져 있다. 본 논문은 평균 분산 개념을 이용하여, 국민경제의 전체적 상황 및 부문간 격치를 반영하면서 직관적으로도 이해하기 쉬운 경제성과지수를 제시하고 이를 이용하여 석유파동 등이 각국경제에 미친 영향을 파악한다. 먼저 경제 각 부문별로 성과를 나타내는 경제지표로부터 시계열 평균과 분산을 계산하고 이를 이용하여 각 부문의 연도별 성과를 지수화한다. 이와같이 계산된 각 부문 지수들의 연도별 평균을 구하고 이를 해당연도의 평균적 경제성과로 해석한다. 또한 연도별로 부문별 지수간의 분산을 계산하여 이를 각 연도별 경제부문간 편차로 해석한다. 평균지수가 높을수록, 그리고 분산지수가 낮을수록 경제성과가 우수하다고 할 수 있다. 본 논문에서 제시된 방법에 따라 한국, 미국, 일본, 대만의 평균 분산 지수를 도출하여 비교 분석한 결과, 동지수가 각국의 경제실상을 잘 나타내고 있으며 두차례의 석유파동이 각국에 미친 영향을 비교하는데 유용하게 활용될 수 있음을 확인하였다.

• Applied Microscopy
• /
• v.39 no.2
• /
• pp.175-183
• /
• 2009

In this paper we present sub-50 pm resolution images of atom columns simulated with the negative of the second derivative of the exit-plane wave function (EPW). The EPW can be retrieved from a focal series reconstruction in the (high resolution) transmission electron microscopy (HRTEM). The simulated images are for Si and InAs in [114] and [116] orientations, which give about sub-50 pm separations of atom columns. The theoretical reason for the validity of this method is given from analysis based on the kinematical diffraction theory, and the limitation for applicability of this method also is discussed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.4
• /
• pp.206-212
• /
• 2004

The numerical analysis on the wave screening performance of the submerged breakwater with various crown widths is presented. The fluid motion is considered as linearized two dimensional potential flow and the finite element method is used to analyze the wave screening performance of the submerged breakwater. It is found that single-submerged breakwater with large crown width shows the most effective wave screening performance and single-submerged breakwater with small crown width also shows fairly good wave screening performance but its effectiveness is less than that of single-submerged breakwater with large crown width. However, double- or triple-submerged breakwater with small crown width shows more effective wave screening performance than that of single- or double-submerged breakwater with large crown width. It is expected that the submerged breakwater with small crown width is economical because it reduces the size of structure.