• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.131-136
• /
• 2013

The aim of this study was to investigate the removal of fluoride using thermally treated pyrophyllite as adsorbent. Sorption experiments were conducted under batch conditions to examine the effects of adsorbent dose, reaction time, initial fluoride concentration and solution pH on fluoride removal. In the experiments, the pyrophyllite thermally treated at different temperatures [untreated (P-U), $400^{\circ}C$ (P-400), $600^{\circ}C$ (P-600)] were used. Results showed that the adsorption capacity was in the order of P-400 > P-U > P-600. The XRD analysis indicated that both P-U and P-400 were composed of quartz, dickite and pyrophyllite while P-600 was quartz. The BET analysis showed that the specific surface area was in the order of P-600 > P-400 > P-U. Kinetic data showed that fluoride sorption to P-400 arrived at equilibrium around 24 h. Equilibrium test demonstrated that the maximum sorption capacity of P-400 was 0.957 mg/g. In addition, fluoride removal by P-400 was not sensitive to solution pH between 4 and 10. However, fluoride removal decreased considerably at highly acidic (pH < 4) and alkaline (pH > 10) conditions. This study demonstrates that pyrophyllite could be used as a low-cost adsorbent for fluoride removal from aqueous solution.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.241-244
• /
• 2003

유류오염 토양내 유류의 분해와 무기오염물질의 함량과의 관계성을 알아보기위해 부산 문헌지구의 유류 오염 토양 profile중 유류가 비교적 많은 두 층과 유기물이 다량 함유된 제주도 토양을 경유로 오염시킨 토양을 선택하여 유류가 분해 정도와 Pb, Zn, Cd, Ni의 함량을 측정 비교하였다. 토양 채취후 즉시 유류를 추출한 것, 15일간 별도의 미생물 영양원을 가하지 않고 습도와 통풍만을 행하여 토양내 존재하는 미생물들에 의하여만 유류가 분해되도록 한 것, $105^{\circ}C$에서 24시간 열처리를 행하여 미생물에 의한 분해보다는 물리적인 방법으로 비교적 강하게 처리한 것 세가지 경우에서 토양에서 추출한 유류를 분석한 결과 normal alkane이 서서히 상당량 분해되는 양상을 보여주었다. 토양내 Pb, Zn, Cd, Ni를 분석한 결과 부산 시료의 경우 두 층(B2, B3)모두 Cd은 검출한계 이하로, Ni의 경우 극소량의 함량을 보여주었다. Zn의 경우 B2는 28～29ug/g, B3는 12～14ug/g으로 세가지 경우 별 차이 없는 양상을 보여 주었다. 하지만, Pb의 경우 B2에서는 그 함량이 유류의 normal alkane의 분해와 함께 서서히 증가하는 경향을 확연히 보여주었으며, B3의 경우도 B2와 유사한 변화 양상을 보여주었다. 제주도 토양의 경우 Pb는 검출되지 않았고, Zn은 소량 검출되었다. Ba, Ni 함량은 normal alkane 분해에 따라 다소 증가하였다. 따라서, 본 예비실험을 통하여 유류오염 토양에서 유류의 분해와 일부 무기이온사이에는 관련성을 갖고 있으며, 이는 유류 분해정도를 파악하는 지시자로써 특정 무기 오염물질을 이용할 수 있을 가능성이 있으므로 좀더 이들 관계성에 대한 연구가 진행될 필요성이 있다고 판단된다.고 과학적으로 분석할 수 있는 방법이 될 수 있을 것으로 기대된다. 의미를 되새기는 것으로 짧은 연구를 시작하겠다. 등은 활성 값이 70% 이상으로 퇴적물 독성이 상대적으로 낮았다. 이중나선 DNA 함량은 28.4 % - 49%로 대조군에 비해서 감소가 크다. 대부분의 정점이 대조군의 30% 내외로 정점 간의 차이는 크지는 않다. 그러나 다른 측정자료와 같이 정점 22에서 18%로 최소치를 나타내고, 정점 2, 12에서 20% 내외의 값을 보인다. 종합적으로 볼 때 오염물질의 유입이 크고, 광양제철 인근 정점 들이 모두 다른 정점에 비해서 낮아서, 퇴적물 독성이 높은 정점으로 조사되었다.hiwo의 광합성 능력은 낮은 농도들에서는 대조구와 유사하였으나, 5 $\mu\textrm{g}$/l의 높은 농도에서는 초기에 매우 낮은 광합성 능력을 보이다가 시간이 경과하면서 대조군보다 더 높은 경향을 나타냈다. 이러한 결과는 식물플랑크톤이 benso[a]pyrene의 낮은 농도에서 노출될 때는 이 물질을 탄소원으로 사용할 가능성이 있음을 시사한다. 본 연구의 결과들은 연안해역에 benso[a]pyrene과 같은 지속성 유기오염물질이 유입되었을 때 내정여부에 따라 식물플랑크톤 군집내 종 천이와 일차생산력에 크게 영향을 미칠 수 있음을 시사한다.TEX>5.2개)였으며, 등급별 회수율은 각각 GI(8.5%), GII(13.4%), GIII(43.9%), GIV(34.2%)로 나타났다.ments of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Japan

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.78-78
• /
• 2000

다결정 실리콘-게르마늄 (poly-SiGe)은 태양전지 개발에 있어서 중요한 물질이다. 우리는 소량의 Ge(x=0.05)으로부터 다량의 Ge(x=0.67)을 함유한 수소화된 비정질 실리콘-게르마늄 (a-SiGe:H) 박막의 고상결정화 과정을 ESR (electron spin resonance)방법으로 조사해보았다. 먼저 PECVD 방법으로 Corning 1737 glass 위에 a-Si1-xGex:H 박막을 증착시켰다. 증착가스는 SiH4, GeH4 가스를 썼으며, 기판온도는 20$0^{\circ}C$, r.f. 전력은 3W, 증착시 가스압력은 0.6 Torr 정도이었다. 증착된 a-SiGe:H 박막은 $600^{\circ}C$ N2 분위기에서 다시 가열되어 고상결정화 되었고, 결정화 정도는 XRD (111) peak의 세기로부터 구해졌다. ESR 측정은 상온 x-band 영역에서 수행되었다. 측정된 ESR스팩트럼은 두 개의 Gaussian 함수로써 Si dangling-bond와 Ge dangling-bond 신호로 분리되었다. 가열 초기의 a-SiGe:H 박막 결함들의 스핀밀도의 증가는 수소 이탈에 기인하고, 또 고상결정화 과정에서 결정화된 정도와 Ge-db 스핀밀도의 변화는 서로 깊은 상관관계가 있음을 알 수 있었다. 특히 Ge 함유량이 큰 박막 (x=0.21, 0.67)에서 뿐만 아니라 소량의 Ge이 함유된 박막(x=0.05)에서도 Ge dangling-bond가 Si dangliong-bond 보다 고상결정화 과정에서 더 중요한 역할을 한다는 것을 알수 있었다. 또한 초기 열처리시 Si-H, Ge-H 결합에서 H의 이탈로 인하여 나타나는 Si-dangling bond, Ge-dangling bond 스핀밀도의 최대 증가 시간은 x 값에 의존하였는데 이러한 결과는 x값에 의존하는 Si-H, Ge-H 해리에너리지로 설명되어 질 수 있다. 층의 두께가 500 미만인 커패시터의 경우에 TiN과 Si3N4 의 계면에서 형성되는 슬릿형 공동(slit-like void)에 의해 커패시터의 유전특성이 파괴된다는 사실을 알게 되었으며, 이러한 슬릿형 공동은 제조 공정 중 재료에 따른 열팽창 계수와 탄성 계수 등의 차이에 의해 형성된 잔류응력 상태가 유전막을 기준으로 압축응력에서 인장 응력으로 바뀌는 분포에 기인하였다는 사실을 확인하였다.SiO2 막을 약화시켜 절연막의 두께가 두꺼워졌음에도 기존의 SiO2 절연막의 절연 파괴 전압 및 누설 전류오 비교되는 특성을 가졌다. 이중막을 구성하고 있는 안티퓨즈의 ON-저항이 단일막과 비교해 비슷한 것을 볼 수 잇는데, 그 이유는 TiO2에 포함된 Ti가 필라멘트에 포함되어 있어 필라멘트의 저항을 감소시켰기 때문으로 사료된다. 결국 이중막을 구성시 ON-저항 증가에 의한 속도 저하 요인은 없다고 할 수 있다. 5V의 절연파괴 시간을 측정한느 TDDB 테스트 결과 1.1$\times$103 year로 기대수치인 수십 년보다 높아 제안된 안티퓨즈의 신뢰성을 확보 할 수 있었다. 제안된 안티퓨즈의 이중 절연막의 두께는 250 이고 프로그래밍 전압은 9.0V이고, 약 65$\Omega$의 on 저항을 얻을수 있었다.보았다.다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품 개발에 따른 새로운 수요 창출과 수익률 향상, 기존의 기능성 안료를 나노(nano)화하여 나노 입자를 제조, 기존의 기능성 안료에 대한 비용 절감 효과등을 유도 할 수 있다. 역시 기술적인 측면에서도 특수소재 개발에 있어 최적의 나노 입자 제어기술 개발 및 나노입자를 기능성 소재로 사용하여 새로운 제품의 제조와 고압 기상 분사기술의 최적화에 의한 기능성 나노 입자 제조 기술을 확립하고 2차 오염 발생원인 유기계 항균제를 무기계 항균제로 대체할 수 있다. 이와 더불

• Radiation Oncology Journal
• /
• v.28 no.2
• /
• pp.91-98
• /
• 2010

Purpose: Troglitazone (TRO), a PPAR-$\gamma$ agonist, can reduce heat shock protein (HSP) 70 and increase the antioxidant enzymes, such as superoxide dismutase (SOD) and catalase, which might affect thermal sensitivity. Here, we investigated whether TRO modifies thermal sensitivity in uterine cervical cancer cells, which is most commonly treated by hyperthermia (HT). Materials and Methods: HeLa cells were treated with $5{\mu}M$ TRO for 24 hours before HT at $42^{\circ}C$ for 1 hour. Cell survival was analyzed by clonogenic assay. The expression of HSPs was analyzed by Western blot. SOD and catalase activity was measured and reactive oxygen species (ROS) was measured using 2',7'-dichlorofluorescin diacetate and dihydroethidium. Results: The decreased cell survival by HT was increased by preincubation with TRO before HT. Expression of HSP 70 was increased by HT however, it was not decreased by preincubation with TRO before HT. The decreased Bcl-2 expression by HT was increased by preincubation with TRO. SOD and catalase activity was increased by 1.2 and 1.3 times,respectively with TRO. Increased ROS by HT was decreased by preincubation with TRO. Conclusion: TRO decreases thermal sensitivity through increased SOD and catalase activity, as well as scavenging ROS in HeLa cells.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.472-479
• /
• 2002

The antimicrobial effects of metabolites from isolated strains from feces of Korean newborn baby and from Dongchimi against six food-borne microorganisms, and characteristics of the metabolites were investigated.. The metabolites from isolated strains adjusted pH to 3.5, 4.0, and 4.5 showed strong growth inhibition against S. Typhimurium, and S. Enteritidis. The metabolites has kept its inhibition activities to the pathogens after catalase, trypsin or pepsin treatment. In addition, antimicrobial activity of metabolites was not decreased by heat treatment at $121^{\circ}C$ for 15 min. D2 and F35-2 strains were confirmed homofermentative and F20-3 was heterofermentative bacteria identified by final organic acid and gas production. The amount of lactic acid produced by D2 and F35-2 strains after 24 h of incubation was 1.84 and 1.85% respectively, but F20-3 strain produced acetic acid (0.22%) and lactic acid (0.91%).

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.9-15
• /
• 2021

Miniaturization of semiconductor devices has recently faced a physical limitation. To overcome this, 3D packaging in which semiconductor devices are vertically stacked has been actively developed. 3D packaging requires three unit processes of TSV, wafer grinding, and bonding, and among these, copper bonding is becoming very important for high performance and fine-pitch in 3D packaging. In this study, the effects of Ti nanolayer on the antioxidation of copper surface and low-temperature Cu bonding was investigated. The diffusion rate of Ti into Cu is faster than Cu into Ti in the temperature ranging from room temperature to 200℃, which shows that the titanium nanolayer can be effective for low-temperature copper bonding. The 12nm-thick titanium layer was uniformly deposited on the copper surface, and the surface roughness (R_q) was lowered from 4.1 nm to 3.2 nm. Cu bonding using Ti nanolayer was carried out at 200℃ for 1 hour, and then annealing at the same temperature and time. The average shear strength measured after bonding was 13.2 MPa.

• Journal of Life Science
• /
• v.31 no.5
• /
• pp.496-501
• /
• 2021

In this study, the marine agar-degrading bacterium Pseudoalteromonas sp. JH-1 was isolated, and its growth and agarase properties were investigated. Seawater was collected from the offshore of the Yonggung Temple in Busan, and agar-degrading bacteria were isolated and cultured with marine agar medium. The bacterium Pseudoalteromonas sp. JH-1 was isolated through 16S rRNA gene sequencing. The extracellularly secreted enzyme was obtained from the culture broth of Pseudoalteromonas sp. JH-1 and was used to characterize its agarase. The extracellular agarase exhibited a maximum activity of 116.6 U/l at 50℃ and pH 6.0 of 20 mM Tris-HCl buffer. Relative activities were 31, 59, 94, 100, 45, and 31% at 20, 30, 40, 50, 60, and 70℃, respectively. Relative activities were 49, 85, 100, 86, 81, and 67% at pH 4, 5, 6, 7, 8, and 9, respectively. Residual activity was more than 85% after exposure at 20, 30, and 40℃ for 2 hr, and more than 82% after exposure at 50℃ for 2 hr. Zymogram analysis confirmed that Pseudoalteromonas sp. JH-1 produced at least two agarases of 55 and 97 kDa. As the products of α-agarase and β-agarase have antioxidation, antitumor, skin-whitening, macrophage activation, and prebiotic effects, further studies are needed on the agarase of Pseudoalteromonas sp. JH-1.

• Journal of Life Science
• /
• v.32 no.4
• /
• pp.285-289
• /
• 2022

In this study, the growth characteristics of an agar-degrading bacterium isolated from seawater samples collected from Yeongheungdo, Incheon, and the characteristics of its agarase were analyzed. The 16S rRNA gene sequence of the isolated strain was 95% similar to that of the genus Agarivorans, and thus the isolated strain was named Agarivorans sp. HY-1. When Agarivorans sp. HY-1 was cultured in a marine broth 2216 medium at 27℃ and 250 rpm, it showed maximum growth on day 1 and showed maximum enzymatic activity on day 2. A crude enzyme solution was prepared from secreted agarase in the culture medium. The extracellular agarase of the Agarivorans sp. HY-1 strain showed maximal activity at 40℃ and pH 7.0 (20 mM Tris-HCl) with 591.91 U/l. The agarase exhibited relative activities of 64, 91, 100, 97, 89, and 60% at 20, 30, 40, 50, 60, and 70℃, respectively. At pH 5, 6, 7, and 8, the relative activities were 79, 95, 100, and 55%, respectively. Furthermore, the agarase exhibited >86% residual activity at 20, 30, and 40℃ for 2 hr and >44% residual activity at 50℃ after 2 hr. A TLC analysis confirmed that Agarivorans sp. HY-1 produced α-agarase. As the degradation products of α-agarase have anticancer and antioxidant effects, Agarivorans sp. HY-1 and its agarase may well prove useful.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.505-515
• /
• 2021

Creep properties of directionally solidified Ni-based superalloy CM247LC under various temperature and stress conditions have been investigated. In the heat-treated specimen, some portion of eutectic γ-γ' remained, and uniform cubic γ' was observed in the dendrites. At low temperature (750℃) and high stress condition, a large amount of deformation occurred during the primary creep, while the tertiary creep region accounted for most of the creep deformation under high temperature and low stress condition. γ' particles are sheared by dislocation dissociated into super lattice partial dislocations separated by stacking faults at 750℃. No stacking faults in γ' were found at and above 850℃ due to the temperature dependence of the stacking fault energy. Raft structure of γ' was found after creep test at high temperature of 950℃ and 1000℃. At 850℃, the deformation mechanism was shown to be dependent on the stress condition, and so rafting was observed only under low stress condition.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.133-141
• /
• 2016

The physicochemical properties, antioxidant capacities, and sensory optimization of taro (Colocasia esculenta) under different aging conditions were investigated to develop black taro. Black taro was processed in three steps (steaming: $95{\pm}3^{\circ}C$ for 1 h; aging: 85, 90, $95^{\circ}C$ for 20, 40, and 60 h; drying: $60^{\circ}C$ for 24 h) and ground into a powder for all experiments. Black taro showed an increased crude fiber content and browning index compared to raw taro. Calcium oxalate contents, reducing sugar contents, moisture contents, and lightness values were decreased during the processing of taro. Improvements in total polyphenol content and antioxidant activity (DPPH, ABTS, FRAP) were observed in the black taro samples aged at higher temperature. Response surface methodology was used for sensory optimization, and the optimum aging conditions with the highest acceptance values were found to be $88.73^{\circ}C$ for 39.50 h for taste, and $88.82^{\circ}C$ for 42.60 h for overall acceptance.