• Journal of the Korean Society of Food Science and Nutrition
• /
• 제34권9호
• /
• pp.1477-1484
• /
• 2005

The effects of various seasoning components, pH of seasoning solution, heating time and storage temperature were investigated on the color and textural properties of the salted radish root (nanmooji) The effects of individual seasoning components in the salted radish root, additives of polyphosphate (AD3), citric acid (AD5), malic acid (AD2) delayed the color changes and softening more, compared to control soaked in water. On the other hand, additives of potassium sorbate (AD1), succinic acid (AD7), MSG (AD8), saccharin (AD6) accelerated the color changes and softening of the salted radish roots. The effects of pH of seasoning solution($X_1$), and heating time ($X_2$) were central composite design and response surface analysis. R- square represented dependent variables correlated independent variables ($X_1,\;X_2$), showed over 0.8 in the color and area value calculated thickness and firmness of salted radish root. Especially, R- square of 'b' represented 'yellow-green' was 0.899. And the result of crossing analysis of individual independent variables ($X_1,\;X_2$), showed that both independent variables had significant effects on the color and textural changes of the salted radish root. The salted radish root increased its color changes and softening, rapidly at $40^{\circ}C$, compared to the other storage temperatures at most storage periods.

• Journal of Conservation Science
• /
• 제27권4호
• /
• pp.421-430
• /
• 2011

Thermal conditions in practice at the traditional bronze workshop of the Korean Folk Village in Yongin were examined along with the microstructures of some high tin bronze objects made there. Laboratory experiments approximating the conditions of the workshop were also carried out and the results were compared. The operating temperature of the workshop furnace was measured to range from $750^{\circ}C$ to $850^{\circ}C$ while the surface temperature of an object, upon its removal from the furnace for additional thermo-mechanical treatments, was generally in the range of $600^{\circ}C$ to $685^{\circ}C$. This variation in working temperatures was reflected in varying microstructures developed upon quenching. The products of the Folk Village were found to consist of microstructures where the ${\alpha}$ grains of the Cu-Sn system were distributed in the background of different phases including the ${\beta}$-martensite phase, retained ${\gamma}$ phase, ${\alpha}+{\delta}$ eutectoid or their mixtures. This variability, which is also identified in objects made in ancient times as well as in our laboratory experiments, suggests that the actual thermal conditions given during the quenching treatments are much more complicated than is inferred from the temperature measurements. This paper will present detailed accounts of the thermo-mechanical treatments as observed in the high tin bronze workshop of the Korean Folk Village and discuss the evolution of varying microstructures in terms of the substantial variability involved in the implementation of the traditional forged high tin bronze technology of Korea.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제18권5호
• /
• pp.464-470
• /
• 1985

Some eels Anguilla japonica, ranging from 16 to 23 g in their weight(average: 20 g), were sampled at the private eel farming company equipped with water recycling system, located at Kimhae city, Kyungnam Province, Korea. Three kinds of vaccine were prepared with Vibrio anguillarum (EPM-8406) isolated at National Fisheries University in Korea for the immune response experiment against eels; those vaccines were made by inactivating the strain with $0.3\%$ formalin for 24 hrs at $25^{\circ}C$, heating for 3 mins or for 15 mins at $121^{\circ}C$, respectively. The various optimal vaccination conditions for the control of vibriosis in the fish were investigated based on the cultivation temperature, vaccination concentration and booster effect. The maximum titer rapidly increased with higher temperature up to $23^{\circ}C$, but there were little differences between $23^{\circ}C\;and\;28^{\circ}C$. The formalin-killed vaccine showed good efficacy at the injection concentration of above $10^8$ cells per fish and little effect at the below $10^7$ cells. The booster effect on the vaccination showed good efficacy above twice-injections with little difference between the numbers of injection.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.179-179
• /
• 1998

실리콘 집적회로 제조시 sub-micron 의 contact 형성 공정은 질연막 형성 후 이의 식각 및 세정, c contact 실리사이드, 획산방지막, 배선 금속층의 형성 과정올 거치게 된다. 본 연구팀에서는 C.F야f2 헬리 콘 플라즈마훌 이용한 고선택비 contact 산화막 식각공정시 형성된 잔류막충과 오염 손상올 관찰하고 산소 플라즈마 처리와 후속 열처리에 따른 이들의 제거 정도를 관찰하여 이에 대한 결과를 발표하였다. 본 연구메서는 식각 및 후처리에 따라 잔류하는 잔류막과 손상층이 후속 공정인 contact 실리사이드 형 섬에 미치는 영향올 관찰하였다. C C.F바f2 웰리콘 풀라즈마률 이용한 식각시 공정 변수로는 수소가스 첨가, bias voltage 와 과식각 시간 의 효과를 관찰하였으며 다른 조건은 일정하게 하였다 .. Contact 실리사이드로는 Ti, Co-싫리사이드를 선 택하였으며 Piranha cleaning, 산소 플라즈마 처리, 산소 풀라즈마+600 'C annealing으로 각각 후처리된 시 편을 후처리하지 않은 시펀돌과 함께 실리사이드 형성용‘시펀으로 이용하였다 각각 일정 조건에서 동 일 두께의 실리사이드훌 형성시킨 후 4-point probe룰 이용하여 면저황올 측정하였다 후처리하지 않은 시편의 경무 실리사이드 형성은 아주 시펀의 일부분에서만 형성되었으며 후속 세정 및 얼처리훌 황에 따라 실리사이드의 면저항은 감소하여 식각 과정을 거치지 않은 깨끗한 실리콘 웨이퍼위에 실리사이드 를 형성시킨 값(control 값)에 접근하였다. 실리사이드의 면저항값은 식각시 노훌된 실리콘 표면 위에 형 성된 손상충보다는 잔류막에 큰 영향을 받았으며 수소 가스가 첨가된 식각 가스로 식각한 시편으로 형 성한 실리사이드의 면저항값이 손상이 상대적으로 적은 것으로 관찰된 수소훌 첨가하지 않은 식각 가 스로 식각한 시펀 위에 형성된 실리사이드의 면저황에 비해 낮은 값을 나타내었다. 실리사이드의 전기적 륙성에 미치는 손상층의 영향올 좀더 면밀히 관찰하고자 bare 실리콘 wafer 에 잔류막이 거의 없이 손상층을 유발시키는 식각 조건들 (100% HBr, 100%H2, 100%Ar, Cl싸fz)에 대하여 실 리콘 식각을 수행한 후 Co-실리사이드률 형성하여 이의 면저황을 측정한 걸과 100% Ar 가스로 식각된 시편을 이용하여 형성한 실리사이드의 면저항은 control 에 기까운 면저항값올 지니고 따라서 손상층이 실리사이드 형섬메 미치는 영향은 크지 않음을 알 수 있었다. 이상의 연구 결과훌 통해 손상층이 실리사이드의 형성이나 전기적 톡섬에 미치는 영황은 잔류막층 에 의한 영향보다 적다는 것을 알 수 았으며 잔류막층의 두께보다는 성분이나 걸합상태, 특히 식각 및 후처리 후 잔류하는 탄소 싱분과 C-Si 결함에 큰 영향올 받는 것올 알 수 있었다.

• Journal of the Korean Vacuum Society
• /
• 제21권6호
• /
• pp.348-353
• /
• 2012

We investigated chemical states of a $Sb_2Te_3$ thin film with the polycrystalline phase by using high-resolution x-ray photoelectron spectroscopy with synchrotron radiation. The $Sb_2Te_3$ thin film was formed by sputtering. The rhombohedral phase was confirmed by x-ray diffraction. To remove the surface oxide, we performed $Ne^+$ ion sputtering for 1 hour with the beam energy of 1 kV and post-annealing at $100^{\circ}C$ for 5 min in ultra-high vacuum. We obtained the Te and Sb 4d core-levels spectra with the peaks at the binding energies of 40.4 and 33.0 eV, respectively. The full-width of half maximum of both the Te and Sb $4d_{5/2}$ core-levels is 0.9 eV. The Te and Sb core-levels only show a single chemical state, and we also confirmed the stoichiometry of approximately 2 : 3.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.211-212
• /
• 2010

GaN 기반의 상부발광형 LED는 동작되는 동안 생기는 전기적 단락, 그리고 칩 위의 p-형 전극과 n-형 전극 사이에 생기는 누설전류 및 신뢰성 확보를 위하여 칩 표면에 passivation 층을 형성하게 된다. SiO2, Si3N4와 같은 passivation layers는 일반적으로 PECVD (Plasma Enhanced Chemical Vapor Deposition)공정을 이용한다, 하지만 이는 공정 특성상 plasma로 인한 damage가 유발되기 때문에 표면 누설 전류가 증가 한다. 이로 인해 forward voltage와 reverse leakage current의 특성이 저하된다. 본 실험에서는 원자층 단위의 박막 증착으로 인해 PECVD보다 단차 피복성이 매우 우수한 PEALD(Plasma Enhanced Atomic Layer Deposition)공정을 이용하여 Al2O3 passivation layer를 증착한 후, 표면 누설전류와 빛의 출력 특성에 대해서 조사해 보았다. PSS (patterned sapphire substrate) 위에 성장된 LED 에피구조를 사용하였고, TCP(Trancformer Copled Plasma)장비를 사용하여 에칭 공정을 진행하였다. 이때 투명전극을 증착하기 위해 e-beam evaporator를 사용하여 Ni/Au를 각각 $50\;{\AA}$씩 증착한 후 오믹 특성을 향상시키기 위하여 $500^{\circ}C$에서 열처리를 해주었다. 그리고 Ti/Au($300/4000{\AA}$) 메탈을 사용하여 p-전극과 n-전극을 형성하였다. Passivation을 하지 않은 경우에는 reverse leakage current가 -5V 에서 $-1.9{\times}10-8$ A 로 측정되었고, SiO2와 Si3N4을 passivation으로 이용한 경우에는 각각 $8.7{\times}10-9$과 $-2.2{\times}10-9$로 측정되었다. Fig. 1 에서 보면 알 수 있듯이 5 nm의 Al2O3 film을 passivation layer로 이용할 경우 passivation을 하지 않은 경우를 제외한 다른 passivation 경우보다 reverse leakage current가 약 2 order ($-3.46{\times}10-11$ A) 정도 낮게 측정되었다. 그 이유는 CVD 공정보다 짧은 ALD의 공정시간과 더 낮은 RF Power로 인해 plasma damage를 덜 입게 되어 나타난 것으로 생각된다. Fig. 2 에서는 Al2O3로 passivation을 한 소자의 forward voltage가 SiO2와 Si3N4로 passivation을 한 소자보다 각각 0.07 V와 0.25 V씩 낮아지는 것을 확인할 수 있었다. 또한 Fig. 3 에서는 Al2O3로 passivation을 한 소자의 output power가 SiO2와 Si3N4로 passivation을 한 소자보다 각각 2.7%와 24.6%씩 증가한 것을 볼 수 있다. Output power가 증가된 원인으로는 향상된 forward voltage 및 reverse에서의 leakage 특성과 공기보다 높은 Al2O3의 굴절률이 광출력 효율을 증가시켰기 때문인 것으로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제36권4호
• /
• pp.405-412
• /
• 2012

In the past, a very popular way to reduce the corrosion rate of zinc was the use of chemical conversion layers based on $Cr^{+6}$. However, the use of chromium salts is now restricted because of environmental protection legislation. Previous research investigated the optimum corrosion resistance of galvanized steel treated with an organic/inorganic solution containing Si. The result showed that the optimum corrosion resistance occurred by heat treatment of $190^{\circ}C$ in 5 min. In this study, one organic and three hybrid organic/inorganic coating solutions were applied to cold-rolled (CR) carbon steel. The coatings were then evaluated for corrosion resistance under a salt spray test. The coating solutions examined in this study consisted of urethane-only, urethane-Si, urethane-Si-Ti, and urethane-Si-Ti-epoxy. The results of the 7 h salt spray test showed that the urethane-Si-Ti and urethane-Si-Ti-epoxy coating solutions had superior corrosion resistance on CR steel.

• Korean Journal of Food Science and Technology
• /
• 제31권3호
• /
• pp.638-643
• /
• 1999

In this study we prepared 5 types of nutritional beverage base samples containing various ratios of soy protein isolate (SPI) and sodium caseinate as protein source. The rheological properties of each sample were measured and the results were as followes; Samples changed their rheological properties with the ratio of SPI. Samples represented newtonian property with low ratio of SPI, pseudoplastic property with the increment of SPI, and bingham pseudoplastic property with higher increment of SPI (80% as protein source). In this result we conjectured that the more was the SPI, the more was the formation of progel during heat treatment, which could be the reason of the rheological changes. In the test of the relationship between temperature and apparent viscosity, apparent viscosity of samples decreased along with the increment of temperature. In observing the relationship between time and apparent viscosity, we found sample, containing high ratio of SPI (80%), represented thixotropic property clearly with the hysteresis loop.

• Korean Journal of Materials Research
• /
• 제1권4호
• /
• pp.221-228
• /
• 1991

In this study we have investigated the sealing characteristics of glasses suitable for producing the magnetic gap of the ferrite head cores which have been widely used for VTR and computer magnetic heads. $PbO-B_2O_3$ g1asses were evaluated by measuring microhardness, thermal expansion coefficient and sliding wear resistance. Concentration distribution of elements at the interface was observed by WDS. wettability was measured by high temperature microscopy. The results were as follows ; 1. In sealing glasses of $PbO-B_2O_3$ system, thermal expansion coefficient and wear volume were increased with increasing PbO content, and were decreased with increasing $B_2O_3$ content. 2. The contact angle of $PbO-B_2O_3$ Systems was mainly influenced by PbO content. 3. The sealing temperature showed a tendency to decrease proportionally with the increase of the coefficient of thermal expansion. 4. The diffusion at the interface between Mn-Zn single crystal ferrite and sealing glasses of $PbO-B_2O_3$ system was dominated by small amount of diffusion of ferrite content into glass part, which was very little affected by sealing heat treatment time.

• Journal of Sensor Science and Technology
• /
• 제10권2호
• /
• pp.101-107
• /
• 2001

A highly selective, sensitive and reliable ozone sensing $In_2O_3$ thin film was fabricated by a sol-gel method. The fabricated film is operated at a relatively lower temperature than ever developed thin films and saved operating power. $In_2O_3$ films deposited by sol-gel technique has been recently attracted because it is an economical and energy saving method and precisely controlled microstructure. Indium alkoxide precursor was synthesized from the reaction between indium hydroxide and butanol. PVA binder was used to improve adhesion of the films. The $In_2O_3$ thin films were obtained by spin coating from 1 to 5 times followed by drying at $100^{\circ}C$ and calcining at $600^{\circ}C$ for 1h. The film thickness was controlled by the number of coating time. The morphology and the thickness of the $In_2O_3$ films were examined by a SEM and XRD. The $In_2O_3$ thin films show a high sensitive to ozone gas at operating temperature of $250^{\circ}C$. The $In_2O_3$ sensor has very good selectivity to $CH_4$, CO, $C_4H_{10}$ and ethanol.