• Tunnel and Underground Space
• /
• v.16 no.5 s.64
• /
• pp.357-367
• /
• 2006

Recently, as the construction of new railway and the relocation of existing line increase, tunnel structures grow longer. The railway fire accidents in long tunnel bring large damages of human life and disaster. The interest of safety in long tunnel have a growing and the safety standard of long tunnel is tightening. For that reason, at the planning of long tunnel, the optimum design of safety facility in long tunnel for minimizing the risks and satisfying the safety standard is needed. For the reasonable design of long railway tunnel considering high safety, qualitative estimation for tunnel safety is required. In this study, QRA (Quantitative Risk Assessment) technique is applied to design of long railway tunnel for assuring the safety function and estimating the risk of safety. The case study for safety design in long railway tunnel is tarried out to verifying the QRA technique for two railway tunnels. Thus, the inclined and vertical shaft for escape way and safety facilities in long tunnel are planned, and the risks of tunnel safety for each case are estimated quantitatively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.351-358
• /
• 2016

An Electrical Point Machine (NS:New-type Switch), which is equipped and operated at railways in Korea, has been used since the 1960s after being imported from Japan. On the other hand, although the mechanical configuration has improved the position motor control circuit, the electrical connection has not been improved, so NS may have a problem, such as the interlocking system of automatic train operation. In addition, NS is the most vulnerable part in the railway system and a huge train accident may occur due to minor defects. The existing NS wiring set of the circuit controller should be checked only if fixed. Therefore, an excessive inspection time only by a Railroad Signal expert is required. In this paper, the improvement of electrical connection in a NS wiring set, such as the position motor control circuit, was developed and the prototype was installed at Seoul Metro in the distance to go section. The results can be used to help make appropriate adjustments. The improvement of the NS wiring set enhance the maintenance efficiency, passenger service and the stability of the signal system as well as reducing the maintenance cost.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.173-181
• /
• 2017

The obstacle deflector sweeps obstacles off the track or absorbs crash energy with an energy absorber to prevent derailment of a train and to minimize damage and casualties after an accident. In this study, an obstacle deflector and its operational mechanism were designed with a tension-type energy absorber and a 4-bar linkage system. Also, a test method was suggested and verified with FEA (Finite Element Analysis) and UTM (Universal Test Machine) for testing of the static load and energy absorbing ability according to EN 15227 regulations. Through this study, an obstacle deflector that meets the EN 15227 standard was designed and a test method was suggested to adjust the collapse load easily and to verify it experimentally according to the design and verification procedure of the obstacle deflector.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.155-169
• /
• 2007

A transport container for a 500 kCi tritium storage vessel was developed, which could be used for the transport of metal tritide from Wolsong TRF facility to a disposal site. The structural, thermal, shielding, and confinement analyses were performed for the container in a view of Type B. As a result of structural analysis, the developed container sustained its integrity under normal and accidental conditions. The maximum temperature increase of the inner storage vessel by radiation was evaluated at $134.8^{\circ}C at room temperature. In $800^{\circ}C$ fire test, The thermal barrier of container sustained the inner vessel at $405^{\circ}C after 30 min, which temperature was allowable for the container integrity since maximum design temperature of inner vessel was $550^{\circ}C. In the evaluation of the shielding, the activity of radiation was nearly zero on the outer surface of inner vessel. Consequently the transport container for a 500 kCi tritium was evaluated to pass all the safety tests including accidental condition, so it was concluded that the designed transport container is proper to be used.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.72-78
• /
• 2020

The accident fatality rate has decreased by more than 90% compared to 2006, due to the safety management and safety investment based on the Rail Safety Act. Most railway safety indicators, including fatality rates, have improved significantly from 60% to 80%, reaching the level of developed countries in terms of most railway safety indicators. However, the only staff fatality rate at work is not improved, and it is 3 to 5 times higher than that of developed countries. Most of the fatality occurred during employee's work recently occurred due to accidents hit by train while track work. In principle, when operating track need to check or maintenance, the operation of the train should be stopped and the work carried out. However, in Korea, due to the highest passenger density and train operating density in the world, it is caused by a structural problem that requires workers to enter the track while the train is running and perform various tasks such as maintenance and inspection. In this study, we analyzed the risk of accidents caused by hit by trains on the track, which is the biggest cause of staff fatality, using the main statistics of the last 10 years. In detail, the scenarios of the main causes of hit by trains and workers were formed to suggest the effectiveness of the current preventive measures and supplementary.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.35-43
• /
• 2009

The specific feature of trains as a means of transportation is that, on one side, at once they can carry big loads but, at the same time, if an accident occurs, it potentially leads to many human casualties or big material losses. Especially, train accidents caused by bad weather conditions result in many fatal losses of human lives and property. In Korea many railways run either in mountainous areas or along rivers thus making them especially susceptible to natural hazards. The types of damages inflicted by heavy rains resulting from rapidly changing meteorological conditions are diverse; and not only their scope is big but also they repeat regularly. Consequently, this study analyses the reasons why such effects of heavy rains on the railway conditions, damage to the railways caused by heavy rains or cases of stone fall as well as other types of accidents are not avoided. Study also, on the basis of laws related to movement in poor weather conditions and specifics of train braking, identifies systematic and technical problems and suggests and emphasizes new complex measures on their prevention.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.1-7
• /
• 2010

Since subway fire disaster at Daegu, Korea smoke control system and passengers evacuation distance has been focused to reform. Existing smoke control facilities need to expand volume of ventilation capacity however, the complicate subway station structure can hardly react dispersion of smokes from massive subway cabin fire. Smoke flow at platform level move upward thought vertical stairway and passengers evacuation goes with same direction. The victims of evacuees from subway station fire mainly due to exposure of heat radiation and smoke. The study demonstration the effect of downward evacuates stairway system by separating evacuation route to smoke movement pass way including saving times of evacuation.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.941-947
• /
• 2008

In the braking of a railroad car, mechanical brake systems using wheel tread and brake disk are applied as well as electrical brake systems by regenerator and rheostat. During disk braking, kinetic energy of the vehicle is converted into thermal energy through friction between disk and brake pad. And it causes high temperature concentration and generates thermal crack on the brake disk surface. In this study, comparative test process for heat-resistance of candidate materials was designed for development of brake disk materials having high heat-resistance. We also verified the efficiency of the process by experiments using conventional brake disk materials.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2009

The specific feature of trains as a means of transportation is that, on one side, at once they can carry big loads but, at the same time, if an accident occurs, it potentially leads to many human casualties or big material losses. Especially, train accidents caused by bad weather conditions result in many fatal losses of human lives and property. In Korea many railways run either in mountainous areas or along rivers thus making them especially susceptible to natural hazards. The types of damages inflicted by heavy rains resulting from rapidly changing meteorological conditions are diverse; and not only their scope is big but also they repeat regularly. Consequently, this study analyses the reasons why such effects of heavy rains on the railway conditions, damage to the railways caused by heavy rains or cases of stone fall as well as other types of accidents are not avoided. Study also, on the basis of laws related to movement in poor weather conditions and specifics of train braking, identifies systematic and technical problems and suggests and emphasizes new complex measures on their prevention.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.12
• /
• pp.90-94
• /
• 2014

Recently, various types of trains are being operated in the same railroad whose designated stop stations are not the same. In other words, each train does not stop at every station. This could cause the pass-through accidents in which a train passes a station where it is supposed to stop. Although the number of train accidents is on the decrease, this type of error is still an important problem to be resolved. It is true that the burdens of train drivers are growing because the number of high speed trains and non-stop stations is increasing in the current railway system. However, another major reason for this accident is that there is no prevention system for these errors in the current train control system although it is being constantly improved. The purpose of this study is to reinforce the train stop system with wireless communication equipment in order to decrease this type of accident and to maximize the safety of railway transportation.