• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.187-196
• /
• 2014

In this paper, Minimize driving energy for operation within a defined distance yeokgan fixed time-resolved and determine the nature of the train is traveling, and to model mathematically. Urban rail car cruise in general by the PID controller is used instead of automatically tracking a target value while traveling in energy consumption to be minimized by using optimal control model railroad charyangreul was designed under real operating conditions the same. The actual track conditions apply to the minimum value or a separate listing of cars around the track facility without a driving energy of the automatic operation and to reduce the driving energy. Therefore, actual route chosen straight line 8 / gradient segment / curve for the measured data analysis, such as sections within the city-minute drive each section and presented how the trains to save energy, depending on the pattern of the train station in the region.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.374-390
• /
• 2015

This research shows the relationship between the number of trains and the probability of trains with arrival delay and suggests way to estimate the benefits of improved punctuality in a bottleneck section of the Gyeongbu Line. The arrival delays of high-speed and conventional trains were estimated using the train operation data of KORAIL. Linear regression models for the probability of trains with arrival delay by train type are presented in this paper. The probabilities of trains with arrival delay were more affected by the number of conventional trains than by the number of high-speed rail trains. For the empirical analysis, a project for increasing the capacity in the Seoul~Geumcheongu office section was tested. The benefits of the improved punctuality were estimated to be 4.2~4.5 billion Korean won every year. This research has some limitations but it can help evaluate more precisely the feasibility of the project of increasing the capacity in bottleneck sections.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.4
• /
• pp.54-63
• /
• 2017

With the aim of promoting the use of metropolitan railways, the present research developed a mode choice model for evaluating its competitiveness against passenger cars. A case study was carried out with Gyeongeui and Joongang line, and the area of interest was the direct operating railway between Ilsan and Guri station where the two lines intersect. The mode choice model was a disaggregate behavior model which used Stated Preference (SP) survey data, and the plot of competition was between private passenger cars and express trains. As a result, the mode choice model was established, and this model was used to analyze characteristics of passengers' time value and elasticity. It was shown that reducing travel time is more efficient than reducing travel cost when it comes to operating express trains in metropolitan railways. Therefore, policies designed for activating the use of metropolitan railways should expand direct operating service of individual lines and run more express trains in order to minimize transfer and in-vehicle time.

• Journal of the Korean Society for Railway
• /
• v.14 no.2
• /
• pp.167-173
• /
• 2011

This paper considers the problem of revising train departure time to reduce electric power consumption of mass rapid transit (MRT) railways. The motion of a train running between stations is divided into three phases: traction, coasting, and deceleration phases. The traction phase requires high electric power to operate MRT railways. In the coasting phase, the train moves stably by consuming little or no power. The deceleration phase is a braking mode and produces some electric power called regenerated brake power owing to inertia force for the train generated In the traction and coasting phases. The regenerative energy can be used by other accelerating trains within a specific range from the train and thereby the power consumptions of train can be reduced. We developed a mixed integer programming model to solve the problem. To validate the suggested model, a computational experiment was conducted using real data from Korea Metropolitan Subway.

• Journal of Korean Society of Transportation
• /
• v.23 no.6 s.84
• /
• pp.115-125
• /
• 2005

The line planning problem is to determine the origin and destination stations of the lines with their frequencies so as to meet the OD demands. Since the advent of high speed trains, Korea railway is confronted with the urgent difficulty to reconstruct the line configuration with the frequencies of each line and each fleet type so the demands could be newly created as well as satisfied. Furthermore. the existing trains except the high speed trains suffer from a longer traveling time than before. Now, to reduce the passenger traveling time, the trains with the various halting patterns are run in the same line. Therefore, it is necessary to develop a new line planning model to consider the various halting patterns. Most of studies find the frequencies of each lines which meet the link traffic loads or minimum link frequencies. But these are based on the assumption of all stop patterns. Furthermore, it is not easy to include the actual constraints as like the minimum number of stops at a station, the maximum number of stops or a train, etc. We develop the line planning model considering not only the various halting patterns but also the actual constraints which is based on the multicommodity network flow model with the additional constraints.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.631-637
• /
• 2012

New Opening of Suseo-Pyeongteak High Speed Railway (HSR) will be a new leap in the Korean railway history. However if this section of HSR line around Seoul Metropolitan Area opens, the confluence of new HSR and existing HSR line in Pyeongteak-Osong section will cause a bottle neck problem. In other words, the opening of Suseo-Pyeongteak HSR line will make the capacity of track reach the limit and the section of railroad between Pyeongteak and Osong will be saturated. This will also make such troubles as restricting the number of train which stops at Cheonan-Asan station. In this study, based on the train assignment theory of TVM430 signal system, the methods of calculating headway and number of train are reviewed and the plan for application of optimal operation pattern during peak hour between Pyeongteak-Osong section is also suggested. To remove the bottle neck problem in this HSR section, 3 alternatives are suggested and the expected effects and problems of each alternative are also analyzed. The results show that the troubles caused by excess of track capacity can be removed without any additional cost if the minimum headway in operating system for HSR is adopted in this section. In the future, if these alternatives are considered to the long-term plan for operating train and signal systems, this will improve the efficiency of train operation, which can remove the bottle neck in the HSR line.

• Electronics and Telecommunications Trends
• /
• v.27 no.2
• /
• pp.41-50
• /
• 2012

최근 녹색 에너지 기술이 전 산업계에 걸쳐 화두가 되고 있는 가운데, 고에너지 효율 교통수단으로 철도의 가치가 부각되고 있다. 전통적인 기계식에서 전자식으로 발전해 온 열차제어 방식에 무선통신 기술을 도입하여 철도신호 분야에 혁신을 가져옴으로써 열차운행의 안정성이 향상되었고, 더욱 정밀한 열차제어기술로 운행 중 열차 간 간격을 줄이는 것이 가능해짐에 따라 전체 노선의 이용 효율을 높일 수 있게 되었다. 본고에서는 무선통신 기반 열차제어시스템에 대하여 소개하고, 현재 사용중인 무선통신 기반 열차제어시스템의 종류와 표준화 현황에 대해 다룰 것이다. 그리고 철도 운영 현장에서 요구되고 있는 다양한 기능들을 지원하기 위해 고려되고 있는 차세대 열차제어용 무선통신 기술인 LTE-R에 대한 기술동향을 살펴보고자 한다.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.183-185
• /
• 2009

자기부상열차는 자기력에 의해 차량이 부상되어 전용선로를 따라 비접촉으로 운행되는 철도운송시스템이다. 자기부상열차에서는 열차가 운영 선로위에 부상되어 비접촉으로 운행되기 때문에 일반 철도시스템에서 적용되고 있는 측위기술의 적용이 어렵다. 따라서 자기부상열차에는 다양한 측위기술들이 개발되어 적용 되고 있다. 본 논문에서는 자기부상열차에 적용중인 다양한 측위기술 및 측위장치에 대하여 검토하고, 독자적인 초고속자기부상열차 개발시 필요한 열차위치검지기술의 개발방향을 제시한다.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.142-155
• /
• 2017

It is anticipated that, in cases in which different train operators share railway network, conflicts may occur among train operators with regard to train operation rate, train priorities, and arrival and departure time; besides this, during times when there is high demand for trains, operators will request train operations intensively, steadily increasing train conflict phenomena. In the present study, train operation sequence, minimum headway, arrival and departure time, train priorities, etc., were analyzed, and while using train departure times as decision variables in variably given train schedules, by adjusting train time requested by train operators, and finally rejecting the train times in cases in which conflict resolution is impossible, so that various constraints can be satisfied, a train slot allocation model was suggested to find the objective function, that is, the maximum number of train slots that can be practically applicable to railway operation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.23-30
• /
• 2016

ccording to the airport railroad linkage facility expansion project constructing a connecting line to the airport railway and improving the signal system and Gyeongui Susaek Station, a high-speed train is able to run directly from Gyeongbu and Honam to the airport railway. According to mixed operation of high-speed Korea Train Express (KTX) and Airport Railroad Express (AREX) trains, to establish ERTMS/ETCS L1 ATP to operate the KTX train, the signaling system of the AREX train is the same as the existing ATC/ATO, but its operation became impossible because the high-speed train causes mutual interference between the "high-speed train (KTX) and AREX ground signaling equipment" and between the "AREX train and KTX (high-speed train) ATP ground equipment." Thus, it was necessary to have a supplemental technical interference analysis comparing the characteristics of the AREX beacon and the KTX balise. So, we resolve the problems of mutual interference between the "high-speed train (KTX) and AREX ground signaling equipment" and between the "AREX train and KTX (high-speed train) ATP ground equipment" with a test using an actual train, and we confirm the technical validity with three types of test module.