• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.7-13
• /
• 2019

This study aims to develop a FE Model to simulate dissimilar friction stir welding and to address its potential for fundamental analysis and practical applications. The FE model is based on Coupled Eulerian-Lagrangian approach. Multiphysics systems are calculated using explicit time integration algorithm, and heat generations by friction and inelastic heat conversion as well as heat transfer through the bottom surface are included. Using the developed model, friction stir welding between an Al6061T6 plate and an AZ61 plate were simulated. Three simulations are carried out varying the welding parameters. The model is capable of predicting the temperature and plastic strain fields and the distribution of void. The simulation results showed that temperature was generally greater in Mg plates and that, as a rotation speed increase, not the maximum temperature of Mg plate increased, but did the temperature of Al plate. In addition, the model could predict flash defects, however, the prediction of void near the welding tool was not satisfactory. Since the model includes the complex physics closely occurring during FSW, the model possibly analyze a lot of phenomena hard to discovered by experiments. However, practical applications may be limited due to huge simulation time.

• Korean Journal of Poultry Science
• /
• v.45 no.4
• /
• pp.237-244
• /
• 2018

In this study, to increase the survival rate of frozen/thaw rooster semen, standard protocols of semen thawing procedures were tested by computer-assisted sperm assay (CASA). We tested 4 different thawing protocols for frozen semen, $5^{\circ}C$ for 2 min, $35^{\circ}C$ for 30 s, $54^{\circ}C$ for 13 s, and $70^{\circ}C$ for 7 s. The pooled semen from 5 to 8 Ogye rooster line was diluted in the HS-1 diluent and frozen in 8% methylacetamide (MA) in liquid nitrogen vapors. To determine standard thawing method, straws were plunged into different temperatures and times. The resulting motilities were recorded by the CASA system. The results of this study showed that the best viability of the spermatozoa was shown by exposure at $5^{\circ}C$ for 2 min. Moreover, the longevity test of thawed sperm at $5^{\circ}C$ for 2 min also supported the higher viability under low temperature preservation of $17^{\circ}C$ for 1 hr. Further research is needed to increase the motility of thawed rooster semen for field application. In addition, the in vivo tests for different rooster lines are also needed for the establishment of avian genetic resource bank.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.1
• /
• pp.11-16
• /
• 2019

This study analyzed various packaging materials and types for frozen foods and the effects of packaging materials on temperature changes during frozen process. Pouches with different film thickness were prepared and placed in an IQF freezer, then the temperature inside pouches measured using a deep thermometer. The most common types of primary packaging for frozen foods in the market was plastic pouches with polyethylene or polyamide/polyethylene multilayer materials. The temperature change inside of packaging was delayed with film thickness increased. As the size of packaged food increased, the temperature change inside the food was slowed down. In addition, the pouches with air inside took more time to reach $-30^{\circ}C$ compared to pouches with less air during frozen process. This study provides information on packaging materials and types for frozen foods and preliminary data of temperature change by different types of packaging.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.255-263
• /
• 2019

Isomaltol glycoside is a hydrophilic furanic glycoside in which the amino acids and sugars of ginseng are thermally denatured during red ginseng production. Various skin whitening tests were conducted on isomaltol glycoside containing a lot of red ginseng extract in order to investigate the skin whitening effect as a cosmetic raw material. We have tested melanin content assay in B16-F10 cells, zebrafish embryo pigmentation assay, mushroom tyrosinase inhibitory activity, western blot analysis to determine skin whitening activity of isomaltol glycosides. In the zebrafish melanin content assay, isomaltol glycoside decreased total melanin content by about 20% and zebrafish tyrosinase activity by about 10% after treatment with 50 and $100{\mu}g/mL$ compared to the untreated control group. Isomaltol glycoside also showed a concentration-dependent decrease in melanin content in B16-F10 melanoma. Furthermore, it increased the expression of MITF phosphorylation factors p-AKT and p-ERK in B16-F10 melanoma and decreased the concentration of MITF. It also inhibited tyrosinase, TRP-1 and TRP-2 expression. The content of isomaltol glycoside was about 3% in the ginseng extract and about 1% in the ginseng root. Thus, isomaltol glycoside is considered as one of the main components that exhibit the whitening activity of ginseng when considered quantitatively as whitening activity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.2
• /
• pp.165-173
• /
• 2019

Lithium anodes (13, 15, 17, and 20 wt% Li) were fabricated by mixing molten lithium and iron powder, which was used as a binder to hold the molten lithium, at about $500^{\circ}C$ (discharge temp.). In this study, the effect of applied pressure and lithium content on the discharge properties of a thermal battery's single cell was investigated. A single cell using a Li anode with a lithium content of less than 15 wt% presented reliable performance without any abrupt voltage drop resulting from molten lithium leakage under an applied pressure of less than $6kgf/cm^2$. Furthermore, it was confirmed that even when the solid electrolyte is thinner, the Li anode of the single cell normally discharges well without a deterioration in performance. The Li anode of the single cell presented a significantly improved open-circuit voltage of 2.06 V, compared to that of a Li-Si anode (1.93 V). The cut-off voltage and specific capacity were 1.83 V and $1,380As\;g^{-1}$ (Li anode), and 1.72 V and $1,364As\;g^{-1}$ (Li-Si anode). Additionally, the Li anode exhibited a stable and flat discharge curve until 1.83 V because of the absence of phase change phenomena of Li metal and a subsequent rapid voltage drop below 1.83 V due to the complete depletion of Li at the end state of discharge. On the other hand, the voltage of the Li-Si anode cell decreased in steps, $1.93V{\rightarrow}1.72V(Li_{13}Si_4{\rightarrow}Li_7Si_3){\rightarrow}1.65V(Li_7Si_3{\rightarrow}Li_{12}Si_7)$, according to the Li-Si phase changes during the discharge reaction. The energy density of the Li anode cell was $807.1Wh\;l^{-1}$, which was about 50% higher than that of the Li-Si cell ($522.2Wh\;l^{-1}$).

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.4
• /
• pp.459-466
• /
• 2019

When a laser pulse is irradiated on a CNT (Carbon Nanotube) and PDMS (Poly dimethylsiloxane) composite coated on a transparent PMMA (Poly methyl methacrylate) substrate, a strong ultrasonic wave is generated due to the thermoelastic effect. In this paper, the thermoacoustic theory related to the wave generation by the CNT/PDMS composite was established. The waveforms of ultrasonic waves when a laser pulse having a Gaussian waveform is irradiated on the composite with a thickness of $20{\mu}m$ were numerically simulated. From the results, it was confirmed that ultrasonic shock waves can be generated from the CNT/PDMS composite and the waveforms are changed little even if the physical properties of the composite are changed by ${\pm}20%$. It was found that the peak positive and negative pressures increase as the thermal expansion coefficient increases, or as density, heat capacity and sound speed decreased. However, those changes were not so sensitive with thermal conductivity. In addition, the physical properties of the CNT/PDMS composite fabricated in this study were estimated from the comparison of the measurement and simulation results.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.2
• /
• pp.33-40
• /
• 2019

Many companies have tried to develop wind power generators with a larger capacity, smaller size and lighter weight. High temperature superconducting (HTS) generators are more suitable for wind power systems because they can reduce volume and weight compared with conventional generators. However, the HTS generator has problems such as huge vacuum vessel and the difficulty of repairing the HTS field coils. These problems can be overcome through the modularization of the HTS field coil. The HTS module coil require a current leads (CLs) for deliver DC current, which causes a large heat transfer load. Therefore, CLs should be designed optimally for reducing the conduction and Joule heat loads. This paper deals with a structural design and thermal analysis of a module coil for a 750 kW-class HTS generator. The conduction and radiation heat loads of the module coils were analysed using a 3D finite element method program. As a result, the total thermal load was less than the cooling capacity of the cryo-cooler. The design results can be effectively utilized to develop a superconducting generator for wind power generation systems.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.2
• /
• pp.61-70
• /
• 2019

Geopolymer is an eco-friendly construction material that has various advantages such as reduced $CO_2$ emission, fire resistance and low thermal conductivity compared to cement. However, it has not been many studies on the thermal behavior of the surface of the geopolymer panel when flame is applied to the surface. In this study, surface characteristics of hardened geopolymer on flame exposure was investigated to observe its characteristics as heat-resistant architectural materials. External structure changes and crack due to the heat shock were not observed during the exposure on flame. According to the residue of calcite and halo pattern of aluminosilicate gel, decarboxylation and dehydration were extremely limited to the surface and, therefore, it is thought that durability of hardened geopolymer was sustained. Gehlenite and calcium silicate portion was inversely proportional to quartz and calcite and significantly directly proportional to BFS replacement ratio. Microstructure changes due to the thermal shock caused decarboxylation and dehydration of crystallization and it was developed the pore and new crystalline phase like calcium silicate and gehlenite. It is thought that those crystalline phase worked as a densification and strengthening mechanism on geopolymer panel surface.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.29-35
• /
• 2017

Quality changes of dried sea cucumber (Stichopusjaponicus) after applying a cyclic rehydration and retorting process were investigated during 4 weeks of storage. The length, volume, and weight of dried sea cucumber increased significantly as the number of rehydration cycles increased. Sea cucumber (SC) was bottled in the glass jar and a retort thermal process ($121.1^{\circ}C$, 0.15 MPa) was applied. The total thermal processing time (TTT) was 24 min based on the temperature at the cold point. The size and texture of retorted SC were significantly changed until the first week of storage. However, regardless of the number of rehydration cycles, the size and texture of samples at different rehydration cycles showed no significant difference during the whole storage. The length, volume, weight, rehydration ratio ($R_R$), hardness, and chewiness at the maximum degree of swelling during rehydration of dried SC were estimated as 100.86 mm, 38.62 mL, 41.05 g, 6.39 of $R_R$, $249.19g_f$, and 4.05 mJ, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.4
• /
• pp.19-26
• /
• 2021

The high-level radioactive waste (HLW) produced from nuclear power plants is disposed in a rock-mass at a depth of hundreds meters below the ground level. Since HLW is very dangerous to human being, it must be disposed of safely by the engineered barrier system (EBS). The EBS consists of a disposal canister, backfill material, buffer material, and so on. When the components of EBS are installed, gaps inevitably exist not only between the rock-mass and buffer material but also between the canister and buffer material. The gap can reduce water-retarding capacity and heat release efficiency of the buffer material, so it is necessary to investigate properties of gap-filling materials and to analyze gap spacing effect. Furthermore, there has been few researches considering domestic disposal system compared to overseas researches. In this reason, this research derived the peak temperature of the bentonite buffer material considering domestic disposal system based on the numerical analysis. The gap between the canister and buffer material had a minor effect on the peak temperature of the bentonite buffer material, but there was 40% difference of the peak temperature of the bentonite buffer material because of the gap existence between the buffer material and rock mass.