• Composites Research
• /
• v.12 no.3
• /
• pp.75-83
• /
• 1999

The thermal properties of carbon/phenolic and silica/phenolic ablative composites were investigated by measuring the heat capacity, thermal diffusivity and thermal conductivity. The heat capacities of carbon/ phenolic and silica/phenolic composites were calculated from differential scanning calorimeter curve. The thermal diffusivities of carbon/phenolic and silica/phenolic composites were measured by the laser flash method with varying laminated direction, i.e., with laminar direction and across laminar direction. The thermal diffusivities decreased with increasing temperature. The thermal conductivities of carbon/phenolic and silica/phenolic composites were calculated using the heat capacity, density and thermal diffusivity. The thermal conductivities increased with increasing temperature. The thermal conductivity of with laminar direction is two times higher than that of across-laminar direction in carbon/phenolic composite due to the directionality of thermal conductivity of carbon fiber. The thermal conductivities of two dimensional fiber reinforced composites were analyzed using the conductivities of constituents and volume fraction of each constituent. The thermal conductivities of carbon fiber and silica fiber were calculated from thermal conductivities of carbon/phenolic and silica/phenolic composites. The thermal conductivities of carbon/phenolic and silica/phenolic composites at RT were predicted from thermal conductivities of fiber and resin with varying the volume fraction of fiber.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.1
• /
• pp.39-43
• /
• 2003

Thermal management is very important for the success of high density circuit design in LTCC. In this paper, LTCC substrates containing thermal via and pad were fabricated in order to study the influence of the thermal dissipation. To realize the accurate thermal analysis for structure design, a series of simple thermal conductivity measurement by laser flash method and parametric numerical analysis have been carried out. The LTCC substrate including via and Ag pad has good thermal conductivity over 103 W/mK which is 44% value of pure Ag material. Thermal behaviors with via arrays, size and density in the LTCC substrate were studied by numerical method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.1-8
• /
• 2018

The object of this paper is to find the characteristics of fire proof materials through an analytical method and to suggest a proper approach for fire-proof design of reinforced concrete beam strengthened with fiber reinforced polymer (FRP). Heating tests for fire-proof materials were conducted and the thermal conductivities and specific heats of them were simulated through finite element analyses. In addition, a finite element analysis on the beam specimen strengthened with FRP under high temperature, which was conducted by previous researchers, was performed and the analytical result was compared with test result. And then the compatibility of the analytical approach was evaluated. Finally, the heat resistance characteristic of RC beam strengthened with FRP was analyzed by the proposed analytical method and the strength decrease of the beam due to the high temperature was evaluated. From the comparison with analytical and test result, it was found that the heat transfer from outside to inside through the fire-proof materials can be suitably simulated by using the proposed analytical approach.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.5
• /
• pp.341-346
• /
• 2017

Knowing the mean free paths (MFPs) of thermal phonons is an essential step in performing heat transfer analysis for nanomaterials, and in determining the optimum design for tailoring the heat transfer characteristics of nanomaterials. In this study, we present a method that can be used to calculate accurately the phonon MFP spectra of nanostructures based on simple phonon kinetic theory. Here, the kinetic theory may be employed by extracting only the diffusive-transport part of the phonon spectrum (i.e., the MFPs are less than a thermal length). By considering phonon dispersion and polarization effects, the phonon MFP distributions of silicon at room temperature are calculated from phonon transport properties and the spectral MFP. Our results are validated by comparison with those of the first principle and MFP spectroscopy data.

• Composites Research
• /
• v.15 no.5
• /
• pp.27-34
• /
• 2002

The purpose of this study is to measure and predict the thermal conductivity of CF3327 plain-weave fabric composite made by Hankuk Fiber, Co. An experiment apparatus based on the comparative method has been made to measure the thermal conductivities of the composite material. Its accuracy was proved by measuring the thermal conductivity of graphite which is well-known. Micro-mechanical approaches are useful to assess the effect of parameters such as fiber and matrix material properties, fiber volume fraction and fabric geometric parameters on the effective material properties of composites. In this study, prediction was based on the concept of three dimensional series-parallel thermal resistance network. Thermal resistance network was applied to unit ceil model that characterized the periodically repeated pattern of a plain weave. The numerical results were compared with experimental one and good agreement was observed. Also, the effects of fiber volume fraction on the thermal conductivity of several composites has been investigated.

• Journal of Sensor Science and Technology
• /
• v.5 no.2
• /
• pp.37-46
• /
• 1996

This paper describes a system that can be used to recognize unknown materials regardless of the change in ambient temperature by using temperature response curve fitting and fuzzy neural network(FNN). There are problems with a recognition system which utilize temperature responses. It requires too many memories to store the vast temperature response data and it has to be filtered to remove the noise which occurs in experiments. Thus, this paper proposes a practical method using curve fitting to remove the above problems of memories and noise. Also, the FNN is proposed to overcome the problem caused by the change of ambient temperature. Using the FNN which is learned by temperature responses on fixed ambient temperatures and known thermal conductivity, the thermal conductivity of the material can be inferred on various ambient temperatures. So the material can be recognized via its thermal conductivity.

• Journal of Power System Engineering
• /
• v.14 no.4
• /
• pp.17-22
• /
• 2010

본 연구는 구의 과도 열전도에 의한 열손실을 계산하는 데 있어, 외부의 경계조건인 대류의 조건에 해당하는 상황을 상수 및 변수로 가정하였을 경우의 열전달문제를 해석한 것이다. 이 문제를 해결하기 위해 집중열용량법을 사용하고 있으며, 대류열전달계수의 값이 온도의 함수로 변한다고 가정하여 계산하였다. 계산을 수행한 결과 대류경계조건의 값을 상수로 가정한 경우가 열손실이 높이 평가된다는 것을 알았고, 이러한 경향을 상관식으로 정리하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.368-375
• /
• 1987

Effective thermal conductivity of the porous nuclear fuel has been investigated numerically. Difficulties associated with irregular shape of pore have been overcome by using the Body Fitted Coordinate Systems. A computer code has been developed to solve the governing equation with appropriate boundary conditions by transforming from the Cartesian coordinates to the nonorthogonal curvilinear coordinates. The effects of the porosity have been investigated. For a convenient use of the result, a correlation equation was suggested under the assumption of circular pore. The computation results by the assumption of randomly oriented elliptic pore has been agreed more closely to existing experimental result than that by the assumption of circular pore.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.350-355
• /
• 1997

PWR 사용후핵연료 집합체를 운반하기 위한 대형용기는 다층구조로 구성되며, 충과 층사이의 접합부에서의 열전달이 발생한다. 이러한 열전달은 고체간의 열전달과 접합부에서의 공극안 기체를 통한 열전달로 구분되며, 후자에 의한 영향을 크게 받는다. 따라서, 2개의 chamber로 구성된 고온열시험장치에 대형용기의 section모델을 넣고 각각의 chamber에 다른 열용량을 유입한 시험을 수행하고 동일조건하의 열해석을 수행하여 열저항계수를 산출하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.225-230
• /
• 1998

DUPIC 핵연료 소결체의 하나로 조사시험과 관련하여 이중 피복관으로 구성된 소결체 설계를 수행하였으며 각각의 설계변수가 핵연료의 온도에 미치는 영향하였다. 하나로에서 조사할 DUPIC 핵연료의 설계해석 결과, DUPIC 핵연료의 조사시험시 열전도도, 출력, 반경 틈새 등은 핵연료의 온도에 크게 영향을 미쳤으며, 피복재 두께, gamma열, 열전달 계수 등은 핵연료의 온도에 크게 영향을 미치지 않았다. Transient 온도분석의 경우 약 160초 이상의 시간에서 평형 온도에 도달할 것으로 분석되었다.