• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.73-73
• /
• 2010

본 연구에서는 성장된 p-형의 단일벽 탄소 나노튜브 (SWCNT)와 폴리머 코팅으로 n-형 특성을 보이는 SWCNT의 접합으로 pn-접합 소자 어레이를 만들고 특성을 분석한 결과에 대해 발표하고자 한다. Y-cut quartz 기판에 0.1 nm 두께의 철 촉매 패턴을 만들고 화학기상증착법으로 잘 정렬된 SWCNT를 성장시킨 후, 열 박리 테이프 (thermal tape)을 이용하여 정렬된 나노선을 실리콘 옥사이드 기판에 전이한다. 전기적(electrical breakdown)으로 금속성의 나노선을 제거하고 p-형의 나노선 배열을 얻을 수 있다. 이 나노선에 국소적으로 폴리머 (polyethyleneimine: PEI) 코팅을 하여 n-형 특성을 갖는 나노선 패턴을 만들 수 있다. 이를 이용하여 만든 소자는 p-형과 n-형이 하나의 나노선 안에 부분적으로 존재하므로 연결부위의 접촉에 관한 문제가 전혀 없으며 소자를 만들기도 유용하다. 이렇게 준비된 p-형 나노선과 n-형 나노선의 접합에서 정류특성을 관찰하였다. 이러한 passive matrix 소자는 터치패드나 유기발광다이오드와 같은 다양한 소자에 응용 가능하다.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.440-448
• /
• 2005

Physical and chemical properties of waste glass, such as bottle glass, plate glass, and LCD glass were investigated to test the feasibility of starting materials for the production of high quality foamed glass for insulating grade construction material without pre-treatments such as cleaning, and waste removals. For this purpose, chemical analysis, thermal analysis, crystalline analysis, and rheological analysis including viscosity were proceeded and the preparation of foamed glass under the qualitative conditions obtained from these various analysis was also attempted. Overall results of various analysis and investigations for these waste glass showed that waste bottle glass and plate glass have high possivility of use as feed materials for the production of foamed glass.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.24-33
• /
• 2017

Multitemporal MODIS vegetation index (VI) data are widely used in vegetation monitoring research into environmental and climate change, since they provide a profile of vegetation activity. However, MODIS data inevitably contain disturbances caused by the presence of clouds, atmospheric variability, and instrument problems, which impede the analysis of the NDVI time series data and limit its application utility. For this reason, preprocessing to reduce the noise and reconstruct high-quality temporal data streams is required for VI analysis. In this study, a data reconstruction method for MODIS NDVI is proposed to restore bad or missing data based on the statistical properties of the oscillations in the NDVI temporal dynamics. The first derivatives enable us to examine the monotonic properties of a function in the data stream and to detect anomalous changes, such as sudden spikes and drops. In this approach, only noisy data are corrected, while the other data are left intact to preserve the detailed temporal dynamics for further VI analysis. The proposed method was successfully tested and evaluated with simulated data and NDVI time series data covering Baekdu Mountain, located in the northern part of North Korea, over the period of interest from 2006 to 2012. The results show that it can be effectively employed as a preprocessing method for data reconstruction in MODIS NDVI analysis.

• Composites Research
• /
• v.33 no.5
• /
• pp.309-314
• /
• 2020

Polymer composites were used to reduce the weight of the spacecraft's cryogenic propellant tank. Since these materials were directional, the permeability performance of the gas permeated or delivered in the stacking direction was an indicator directly related to performance such as tank stability and onboard fuel quantity estimation. In addition, the results of permeation measurements and optical analysis of the surface to verify the effect of the number of cycles exposed to the cryogenic-room temperature environment are included. As a result, the permeability was inversely proportional to the thickness and was proportional to the number of thermal shocks, and it was verified that the permeability performance was suitable for the cryogenic propellant tank material for the space launch vehicle.

• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.269-284
• /
• 2006

Aquifer responses to the river stage fluctuations were analyzed between the groundwater level and the river stage in an alluvial aquifer. The auto-correlation and cross-correlation as a time series analysis were applied. Study site is a floodplain in the Mangyeong river. Groundwater levels in each depth representing the silt and sand(SS), gravel and sand(GS), and weathered zone(WZ) layer were monitored. The groundwater levels were more sensitive to the river stage fluctuations than rainfall. Since the river stages are influenced by the gate operations downstream and tide, show periodic patterns, and the correlation coefficients with rainfall is low. Cross-correlation function between groundwater level in each depth do not show any delay time, then response time is very short to each depth. Cross-correlation analysis were performed to estimate the response time of groundwater levels to river stage fluctuations. Groundwater levels respond to the river stage within 30 minutes to 1 hour in wells near the stream. Short time lag between groundwater level and river stage indicates the quick response. A different response time imply the hydraulic inhomogeneity of the site, and a probable high permeability zone between river and aquifer can be inferred. Mangyeong-river in study site is a gaining stream normally, and river stage rising by gate operation or floods makes river water flow into groundwater. The auto-correlation and cross-correlation functions as a time series analysis can be a good tool to interpret the aquifer responses to stream stage fluctuation

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1573-1575
• /
• 2001

삼상 교류에 의한 플라즈마 발생 장치 중구리튜브 전극을 이용한 아크 글라이딩 식의 비이행형 플라즈마 발생장치는 전극구조가 간단하고 교체가 용이 할 뿐 아니라, 전극과 노즐의 형상을 유해 가스 처리에 충분한 엔탈피를 가지도록 설계될 수 있으므로, DC형과 더불어 차세대 환경정화용 핵심장치로 관심을 모으고 있다. 본 연구에서는 교류형의 특성상 어쩔 수 없이 발생하는 열플라즈마의 플리커를 제어하기 위해 글라이딩 아크의 움직임과 플라즈마 플래임의 움직임을 분석하여 열 플라즈마의 안정화 조건을 정립하고자 하였다. 또한 본 논문에서는 여러 가지 조건에서 수행된 플라즈마에 관련된 수치해석과 플라즈마 발생기의 동작시험의 결과를 바탕으로 삼상교류 열플라즈마를 안정시킬 수 있는 기본적인 조건의 범위를 제시하였으며 이에 대한 토의를 기술하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.657-660
• /
• 2008

In this study, quantitative analysis on effect of hydration heat and autogenous shrinkage of concrete using BFS was studied. Especially, it analyze section data statistically which hydration heat and autogenous shrinkage rise, and it appeared the correlation of hydration heat and autogenous shrinkage as well as quantitative coefficients of the main properties. As a result, the section which hydration heat and autogenous shrinkage of BFS-50 rise rapidly is delayed than OPC, but the slope of hydration heat and autogenous shrinkage in that section appeared similar shape in each mixing. Finally it will be possible to control the amount of autogenous shrinkage because hydration heating velocity and autogenous shrinking velocity are decreased by using BFS.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.388.2-388.2
• /
• 2014

최근 그래핀 연구와 더불어 2차원 구조의 나노소재에 대한 관심이 급증하면서 육각형의 질화붕소(hexagonal boron nitride; h-BN) 박막(nanosheet) [1]이나 붕소 탄화질화물(boron caronitride; BCN) 박막 [2,3]와 같은 2차원 구조체에 대한 연구가 활발히 진행되고 있다. 그 중 BCN은 반금속(semimetal)인 흑연(graphite)과 절연체인 h-BN이 결합된 박막으로 원소의 구성 비율에 따라 전기적 특성을 제어할 수 있다는 장점이 있다. 따라서 다양한 나노소자로의 응용을 위한 연구가 활발히 진행되고 있다. 본 연구에서는 폴리스틸렌(polystyrene, PS)과 보레인 암모니아(borane ammonia)를 고체 소스로 이용하여 열화학기상증착법을 이용하여 BCN 박막를 SiO2 기판 위에 직접 합성하였다. SEM과 AFM 관측을 통해 합성된 BCN 박막을 확인하였으며, RMS roughness가 0.5~2.6 nm로 매우 낮은 것을 확인하였다. 합성과정에서 PS의 양을 조절하여 BCN 박막의 탄소의 밀도를 성공적으로 제어하였으며, 이에 따라 전기적인 특성이 제어되는 양상을 확인하였다. 또한 합성온도 변화에 따른 BCN 박막의 전기적인 특성이 제어되는 양상을 확인하였다. 추가적으로 같은 방법을 이용하여 BCN 박막을 Ni 위에서 합성하여 SiO2 기판위에 전사 하였다. 합성된 BCN 박막의 구조적 특징과 화학적 조성 및 결합 상태를 투과전자현미경(transmission electron microscopy), X-선 광전자 분광법(X-ray photoelectron spectroscopy)을 통해 조사하였다.

• Journal of Life Science
• /
• v.24 no.2
• /
• pp.105-111
• /
• 2014

The purpose of this study was to characterize equine heat-shock protein (Hsp) genes and analyze their expression pattern in various horse tissues and blood leukocytes after exercise. In a previous study, RNA sequencing of blood and skeletal muscles of thoroughbreds before and after exercise was performed using differently expressed gene (DEG) analysis. Three Hsp genes (HspH1, Hsp90${\alpha}$ and Hsp70) were selected by DEG analysis and were found to be differentially expressed in either blood or muscle. To validate and extend previous observations on these genes, we performed RT-PCR analyses of horse tissue as well as real-time qPCR analyses of blood leukocytes after exercise. mRNA expression of these Hsp genes was found to be ubiquitous in the analyzed tissues (including thyroid, colon, skeletal muscle, cecum, kidney, spinal cord, heart, and lung). In addition, Hsp mRNA expression of these genes in extracted whole blood increased after 120 minutes of exercise compared to the baseline condition. These results are in agreement with the results of human and other experimental animals, suggesting that regulatory mechanisms that are responsible for upregulation of Hsp gene transcription may be conserved among species. Further investigations to correlate Hsp gene expression patterns with athletic performance or recovery processes after exercise are warranted.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.474-474
• /
• 2013

PDMS는 미세패턴을 위해 소프트 리소그래피 널리 활용되어질 뿐만 아니라, 재질이 투명하고 탄성과 강한 내구성을 갖고 있어 유연한 광학 및 전자소자에 이용될 수 있다. 최근에는, 이러한 PDMS를 서브파장구조(subwavelength grating structure)를 형성하거나 텍스쳐(texture)표면구조를 이용한 효과적인 반사방지막(antireflection coating)기판을 제작하여 태양전지 및 디스플레이 소자의 성능을 발전시키는 연구가 활발히 진행되고 있다. 한편, 수열합성법(hydrothermal method)이나 전기화학증착법(electrodeposition method)으로 비교적 간단한 공정을 통해서 다양한 기판위에 산화아연(ZnO) 나노막대(nanorod)를 수직정렬로 성장시킬 수 있는데, 이러한 구조는 반사방지특성의 유효 굴절률 분포(effective refractive index profile)를 갖고 있기 때문에 LED나 태양전지에 성능을 개선할 수 있다. 이에 본 연구에서는 수열합성법을 통해 성장된 수직 정렬된 산화아연 나노막대를 이용한 PDMS 표면의 미세패턴 형성하여 광학적 특성을 분석하였다. 실험을 위해, 스퍼터링을 통해서 산화아연 시드층을 형성한 후, 질산아연헥사수화물과 헥사메틸렌테트라민을 수용액에 담가두어 산화아연 나노막대를 성장시켰으며, PDMS의 베이스와 경화제의 질량비를 10：1으로 용액을 준비하여 수직 정렬된 산화아연 나노막대 표면을 casting method으로 코팅하여 열경화 처리하였다. 제작된 샘플의 형태, 구조 광특성을 관찰하기 위해서 전계방출형전자현미경, X선 회절 분석기, 분광 광도계를 이용하였다.