• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.21-29
• /
• 2023

In this study, the stress characteristics of temporary fixed steel rods were analyzed in the "temporary fixing system using internal prestressing tension", which is mainly applied to the construction of superstructures by FCM. It was difficult to confirm the changes in initial tensile force in this system because the steel rod was internally connected to the pier and the PSC BOX. Therefore, measurement was performed before and after the completion of each segment using an FBG sensor to measure the change in the micro length of the steel rod. The results of the analysis showed that 75% to 90% of the maximum vertical contraction of the steel rod that occurred until the completion of the cantilever segment occurred in the fixing ~ 1segment, and the maximum loss of initial prestressing force was 39%. Such excessive loss of tension force to 1 segment means that tension is needed to improve the precision of construction during the fixation, and re-tension is needed to secure stability for conduction of cantilever segments after the completion of 1segment. In the 2 ~ last segment, the stress of the steel rod decreased gradually, and in the summer, the decrease in stress tended to partially recover due to the increase in the length of the steel rod corresponding to the increase in the vertical volume of PSC BOX. The dominant factor in the stress change in 2~ last segment in this phenomenon is judged to be the change in the length of the steel rod according to the temperature. Unlike the change in length, the relaxation was 1.2-2.7%, which was mostly offset by the opposite stress corresponding to the temperature stress. Therefore, a plan was proposed to improve the internal stress, such as adjusting the fixation time.

• Korean Journal of Food Science and Technology
• /
• v.45 no.6
• /
• pp.714-720
• /
• 2013

We investigated the brewing and fermenting characteristics of makgeolli produced from high-yielding rice varieties. We used the high-yielding indica rice varieties, Anda and Dasan 1, and the japonica varieties, Deuraechan and Boramchan. Our results showed that the rice protein level was the highest in makgeolli produced from Anda ($7.5{\pm}0.2%$), while the amylose level was the lowest in makgeolli produced from the mid- to late-maturing japonica varieties (Deuraechan, $18.9{\pm}0.7%$; Boramchan, $18.9{\pm}1.4%$). Samples of makgeolli produced from Anda, Deuraechan, and Boramchan by using the Ipguk (Koji) method had an alcohol content of 16.6-17.4% on completion of fermentation. By contrast, makgeolli produced from Dasan 1 had an alcohol content of 14.3%; further, the makgeolli differed significantly in the sensory test and was scored as excellent regarding comprehensive preference. For makgeolli produced by using the uncooked rice fermentation method, samples produced from the indica varieties, Anda and Dasan 1, had lower alcohol contents (17.2% and 17.0%, respectively) and higher total acidity levels (0.33% and 0.31%, respectively) than did samples produced from the japonica varieties, Deuraechan and Boramchan (0.28% for both). In the sensory test, samples produced from Anda and Dasan 1 performed significantly better regarding scent, swallowing, and comprehensive preference.

• Journal of agricultural medicine and community health
• /
• v.38 no.2
• /
• pp.130-141
• /
• 2013

Objectives: The purpose of this study was to reconsider the necessity of stroke-related educational programs by investigating early symptoms of stroke that emergency medical technicians (EMTs) may experience. Methods: An interview survey was carried out, targeting all EMTs 298 people who were working at 119 fire safety centers and local units in Jeollabuk-do province, from April 1 to 30, 2011. An interviewer administered questionnaire was used to obtain data on ETMs' demographic characteristics, educational level on stroke, and awareness level about early symptoms of stroke and treatment-related characteristics of stroke patients. Results: The results showed that 63.2% of those surveyed had completed the required educational programs on stroke during the past year. The level of awareness about early symptoms of stroke and assessment of stroke patients' condition was relatively high for women, those who were 30 years under, low position people, emergency service practitioners, emergency medical technicians, and people who have completed education, respectively. It was also turned out that 82.8% of those surveyed took stroke patients to the nearest hospitals first so that they could receive appropriate treatment. The level of awareness about early symptoms of stroke and assessment of stroke patients' condition in people who have completed education were higher than non-complete. The level of awareness about early symptoms of stroke was positively correlated with confidence, satisfaction and appropriateness in treatment of stroke patients. Conclusions: These results strongly suggest that it is necessary to operate specialized educational programs to enhance EMTs' appropriate awareness of the early symptoms of stroke and assessment of stroke patient's condition.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.184-188
• /
• 2002

The Cu/Ni/Cu(002)/Si(100) films which have perpendicular magnetic anisotropy were deposited by e-beam evaporation methods. From the reflection high energy electron diffraction pattern, the films were confirmed to be grown epitaxially on silicon. After 2X lots ions/$\textrm{cm}^2$ C+ irradiation, magnetic easy-axis was changed from surface normal to in-plane as shown in the hysteresis loop of magneto-optical Kerr effects. It became manifest from analysis of X-ray reflectivity and grazing incident X-ray diffraction that even though interface between top Cu layer and Ni layer became rougher, the contrast of Cu and Ni's electron density became manifest after ion irradiation. In addition, the strain after deposition of the films was relaxed after ion irradiation. Strain relaxation related with change of magnetic properties and mechanism of intermixed layer's formation was explained by thermo-chemical driving force due to elastic and inelastic collision of ions.

• Journal of Wetlands Research
• /
• v.17 no.1
• /
• pp.11-18
• /
• 2015

As the seriousness of water pollution resulted from nitrogen is being magnified, research has been conducted to reduce nitrogen in sewage as well as wastewater. Particularly research on innovative nitrogen removal methods that are based on the reaction of nitritation and are economically feasible and eco-friendly has been receiving attention. However, research on the applicability and efficiency of the methods based on the reaction of nitritation has not been completely done yet. Accordingly, the current study has analyzed the characteristics of sewage flowing into municipal wastewater treatment plants, primary clarifier supernatant, recycled water, and livestock wastewater and also operated a laboratory-level reactor. The result shows that recycled water and livestock wastewater contain higher-concentration nitrogen than other kinds of sewage, so they increase nitrogen loading in the water treatment line. And the result of operating a reactor shows that because of ammonium nitrogen low concentration, sewage and primary clarifier supernatant do not induce the reaction of nitritation. Also, there exist differences in the conditions of retention time inducing the reaction of nitritation by the types of sewage, and this seems to be attributed to organic compound and ammonium nitrogen concentration. Among the kinds of sewage inducing the reaction of nitritation, anaerobic digester supernatant indicates the highest efficiency.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.245-251
• /
• 2015

We have applied mechanical alloying (MA) to produce soft magnetic composite material using a mixture of elemental $Fe_2O_3$-Mg powders. An optimal milling and heat treatment conditions to obtain soft magnetic ${\alpha}$-Fe/MgO composite with fine microstructure were investigated by X-ray diffraction, differential scanning calorimetry (DSC) and vibrating sample magnetometer (VSM) measurement. It is found that ${\alpha}$-Fe/MgO composite powders in which MgO is dispersed in ${\alpha}$-Fe matrix are obtained by MA of $Fe_2O_3$ with Mg for 30 min. The saturation magnetization of ball-milled powders increases with increasing milling time and reaches to a maximum value of 69.5 emu/g after 5 h MA. The magnetic hardening due to the reduction of the ${\alpha}$-Fe grain size by MA was also observed. Densification of the MA powders was performed in a spark plasma sintering (SPS) machine at $800{\sim}1000^{\circ}C$ under 60 MPa. X-ray diffraction result shows that the average grain size of ${\alpha}$-Fe in ${\alpha}$-Fe/MgO nanocomposite sintered at $800^{\circ}C$ is in the range of 110 nm.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.6
• /
• pp.820-825
• /
• 2010

The functional food components from various Basidiomycota were investigated to improve human intestinal microflora, especially associated with obesity. EtOH extract from Gyrophora esculenta fruit body and Coriolus versicolor judae mycelia showed antimicrobial activities on Eubacterium limosum, Clostridium perfrigens, Clostridium paraputrificum, Clostridium difficile and Clostridium ramosum, and on Bacteroides fragilis, respectively. Although the 80% EtOH extract from G. esculenta fruit body and hot-water extract from C. versicolor judae mycelia did not reduce weight of the rats in the high fat diet, these extracts showed stability at high temperatures and at wide pH ranges. In the rat group of feeding 80% EtOH extract from G. esculanta fruit body, Bifidobacterium spp. were increased and Clostridium spp. and Eubacterium spp. were decreased compared to the high fat feeding group. Also sensory evaluation was carried out for the development of prototype drink product. These results demonstrated the possibilities of C. versicolor judae and G. esculenta as a functional food components to control intestinal microbial flora.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.11
• /
• pp.897-903
• /
• 2015

In this paper, the contrast therapy of skin was numerically investigated by solving the conjugate heat transfer problem. A finite volume method based on the SIMPLE algorithm was adopted to solve the axisymmetric incompressible Navier-Stokes equations, coupled with an energy equation. These equations are strongly coupled with the Pennes bio-heat equation in order to consider the effect of blood perfusion rate. We investigated the thermal response of skin at some selected depths for various input temperature profiles of a stimulator for contrast therapy. From the numerical simulations, the regions with cold/hot threshold temperatures were found for five input temperature profiles. It was shown that the temperature varies mildly for different input profiles as the depth increases, owing to the Pennes effect. The input temperatures for effective hot/cold stimulation of dermis layer were found to be $47^{\circ}C$ and $7^{\circ}C$, respectively. The present numerical results will be used for finding an optimal temperature profile of a stimulator for contrast therapy.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.1
• /
• pp.21-30
• /
• 2004

This study deals with free vibrations of laminated composite structures with a channel section using finite element method. In this paper, the mixed finite element method using Lagrangian and Hermite interpolation functions is adopted and a high-order plate theory is used to analyze laminated composite non-prismatic folded plates with a channel section more accurately for free vibration. The theory accounts for parabolic distribution of the transverse shear stress and requires no shear correction factors supposed in the first-order plate theory. An 32×32 matrix is assembled to transform the system element matrices from the local to global coordinates using a coordinate transformation matrix, in which an eighth drilling degree of freedom (DOF) per node is appended to the existing 7-DOF system. The results in this study are compared with those of available literatures for the conventional and first-order plate theory. Sample studies are carried out for various layup configurations and length-thickness ratio, and geometric shapes of plates. The significance of the high-order plate theory in analyzing complex composite structures with a channel section is enunciated in this paper.

• Journal of Broadcast Engineering
• /
• v.18 no.1
• /
• pp.21-30
• /
• 2013

It is a challenging problem to most of the image processing when the light source is unknown. The color of the light source must be estimated in order to compensate color changes. To estimate the color of the light source, additional assumption is need, so that we assumed color distribution according to the light source. If the pixels, which do not satisfy the assumption, are used, the estimation fails to provide an accurate result. The most popular color distribution assumption is Grey-World Assumption (GWA); it is the assumption that the color in each scene, the surface reflectance averages to gray or achromatic color over the entire images. In this paper, we analyze the characteristics of the camera response function, and the effect of the Grey-World Assumption on the pixel value and chromaticity, based on the inherent characteristics of the light source. Besides, we propose a novel method that detects important pixels for the color estimation of the light source. In our method, we firstly proposed a method that gives weights to pixels satisfying the assumption. Then, we proposed a pixel detection method, which we modified max-RGB method, to apply on the weighted pixels. Maximum weighted pixels in the column direction and row direction in one channel are detected. The performance of our method is verified through demonstrations in several real scenes. Proposed method better accurately estimate the color of the light than previous methods.