• Journal of the Korean Society of Hazard Mitigation
• /
• v.1 no.1 s.1
• /
• pp.127-138
• /
• 2001

Although Carbon/Carbon Composites(CFRCs) have excellent mechanical properties at high temperature, the disadvantage of combustion in air restricts their applications. Thus a lot of investments have been studied to improve the drawback of CFRCs. In this study, SiC used as a thermal protective coating material possesses almost the same expansion coefficient compared to that of carbon, so SiC was coated on 4D (directional) CFRCs by Pack-Cementation process. For the 4D CFRCs coated with SiC, optical microscopy observations were performed to estimate the coating mechanism involved and TGA tests were also performed to evaluate the improvement of combustion resistance. And their high temperature combustion properties were investigated by the arc torch plasma test. From the results, it is found that the mechanical properties and high temperature combustion properties of the 4D(directional) CFRCs coated with SiC were much better than bare 4D CFRCs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.1
• /
• pp.51-57
• /
• 2014

Ultrasonic imprinting is a novel process for replicating micropatterns on thermoplastic polymer substrates with low energy consumption and short cycle time. The polymer substrate is softened by the frictional heat and repetitive deformation energy under ultrasonic excitation; thus, a number of micropatterns are replicated on the softened polymer substrate. In the present work, the effect of mold temperature on the replication characteristics of ultrasonic imprinting is investigated. The temperature change in the patterned region is measured by varying the mold temperature. Numerical simulation is then performed for investigating pattern replication characteristics under various mold temperatures. In addition, pattern replication ratio and uniformity are compared through various experimental measurements. Through the results of these comparisons, it is found that the mold temperature has a significant positive effect on the replication characteristics of ultrasonic imprinting.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.479-479
• /
• 2012

유기발광소자는 낮은 구동전압, 저전력, 높은 명암비, 빠른 응답속도, 넓은 시야각 및 높은 박막의 특성을 가지고 있어서 차세대 평판 패널디스플레이 기술로 각광받고 있다. 하지만 청색 유기발광소자는 적색과 녹색 유기발광소자에 비해 낮은 신뢰성, 발광효율 및 색 순도의 문제점을 가지고 있어, 이를 개선하기 위한 연구가 다양하게 연구되고 있다. 청색 유기발광소자의 경우 발광층 내부로 주입되는 정공과 전자의 균형을 조절하기 위해 p-i-n 구조를 사용하거나 이리듐-유기물 합성물과 같은 인광물질의 적용하여 발광효율을 높이는 청색 유기발광소자에 대한 연구가 진행되고 있다. 하지만 정공 보조층과 청색 형광층의 도핑구조의 청색 유기발광소자에 대한 발광효율 증가 메커니즘에 관한 연구는 비교적 많이 이루어지지 않았다. 본 연구에서는 열 증착 방법을 이용하여 정공 보조층과 청색 형광층으로 구성된 이중 발광층을 사용한 청색유기발광소자의 발광효율 증가 메커니즘에 대해 연구하였다. 10%의 2,9-dimethyl-4,7-diphenyl-1,10-phenanthorlene (BCP)로 도핑된 2-methyl-9,10-bis(naphthalene-2-yl)anthracene (MADN)층을 발광층으로 사용한 유기발광소자, 5% MADN으로 도핑된 1, 3-bis(carbazol-9-yl)benzene (mCP) 층을 발광층으로 사용한 소자 및 10% BCP로 도핑 된 MADN 층과 5% MADN로 도핑 된 mCP층을 혼합하여 발광층으로 사용한 소자의 전류밀도-전압-발광 특성을 비교하여 청색 유기발광소자의 발광효율 증가 메커니즘을 분석하였다. 이중 발광층을 가지는 소자는 두 단일 발광층 중심부의 경계면에서 축적된 정공에 의해 발생한 쿨롱 인력으로 더 많은 전자들을 끌어들이게 되어 엑시톤 형성 및 빛 방출이 증가하였다. 이 실험의 결과는 MADN 형광물질을 가진 청색 유기발광소자의 발광효율 증가 메커니즘에 대한 이해를 높이는데 도움을 줄 수 있다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.1
• /
• pp.35-38
• /
• 2015

LEDs are considered to be an alternative for enhancement of energy efficiency, applied for numerous areas such as display, automotive headlight not only lights. Yellow phosphor is generally utilized with blue LEDs to generate WLED, $Y_3Al_{5}O_{12}:Ce^{3+}$ is typically used as the yellow phosphor. The phosphor, mixed with epoxy resin, has been used by being spread and hardened on the blue LED chip. This paste-based packaging gives rise to problems of degradation of phosphor by heat and decrease of luminous efficiency. Although phosphor plate is used instead of the epoxy-phosphor mixture to solve these problems, loss of luminous efficacy by total internal reflection inside the plate also should be solved. In this study, we coated the side of the plate with silver as one of the solution.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1163-1168
• /
• 2011

Compared with the spark-ignition gasoline engine, the compression-ignition diesel engine has reduced fuel consumption due to its higher thermal efficiency. In addition, this reduction in the fuel consumption also leads to a reduction in $CO_2$ emission. Diesel engines do not require spark-ignition systems, which makes them less technically complex. Thus, diesel engines are very suitable target engines for using biofuels with high cetane numbers. In this study, the spray characteristics of biofuels such as vegetable jatropha oil and soybean oil were analyzed and compared with those of diesel oil. The injection pressures and blend ratios of jatropha oil and diesel oil (BD3, BD5, and BD20) were used as the main parameters. The injection pressures were set to 500, 1000, 1500, and 1600 bar. The injection duration was set to $500{\mu}s$. Consequently, it was found that there is no significant difference in the characteristics of the spray behavior (spray angle) in response to changes in the blend ratio of the biodiesel or changes in the injection pressure. However, at higher injection pressures, the spray angle decreased slightly.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.213-219
• /
• 1997

The plasma polymerized styrene films were prepared by using an inter-electrode capacitively coupled gas-flow-type reactor, and the effects of plasma polymerization condition on the molecular weight distribution were investigated by Fourier Transform Infrared (FT-IR), Pyrolysis Gas Chromatography(PyGC), Differential Scanning Calorimetry(DSC) and Gel Permeation Chromatography(GPC). From the above results, the very cross-linked films different from chemical characteristics of the starting monomer were taken out, and it is realized that the molecular structure, cross linking density, and molecular weight distribution could be controlled by changing the parameters such as deposition pressure, deposition power and gas flow rate. Accordingly, it is suggested that plasma polymerization method performed by inter-electrode capacitively coupled gas-flow-type reactor has good characteristics for manufacturing the functional organic thin films which can be applied in sensors, opto-electric device, photo-resist by changing the polymerization parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1661-1667
• /
• 2009

Post-cure characteristics of a silicone rubber material which is widely used for a LCD lamp holder were investigated using thermogravimetric analysis (TGA). Research was especially focussed on searching for the optimum post-cure conditions in relation to the practical operation environments. The results showed that incipient volatile temperature(Ti) during the process was considered as the most important factor and, thereby, post-curing for 2hrs at $250^{\circ}C$seemed to be a reasonable condition in the practical view-point. Arrhenius plot of shift factors which were empirically determined from the time-temperature-superposition-principle showed good linearity, exhibiting the post-cure mechanism might be proceeded through single mechanism with activation energy of 108.25kJ/mol.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.677-684
• /
• 2013

Zinc alginate films were prepared by a film maker from sodium alginate solutions of different weight ratios and then they solidified into 3 wt% content $ZnCl_2$ coagulation solution and washed and dried at a $60^{\circ}C$ oven for 20 min. The characteristics were measured by several methods (antimicrobial activity, viscosity, FTIR, TGA, SEM, EDS, contact angle, tensile strength and solubility) and the film properties were investigated. The antimicrobial test showed that the zinc alginate films result in excellent antimicrobial activity in the two strains (Klebsiella pneumonia, Staphylococcus). The surface of zinc alginate film from the solution of 9 wt% sodium alginate showed more uniform shape than any other films and the cross-section were hard and rough when the films were well-solidified by the $ZnCl_2$ solution. The tensile strength of zinc alginate films increased along with the concentration of sodium alginate solution due to the cross-linking, and the initial thermal decomposition temperature increased gradually.

• Fire Science and Engineering
• /
• v.26 no.4
• /
• pp.1-9
• /
• 2012

We have examined In order to compare each other from explosion and combustion characteristics about the dusts which collects from manufacturing process of wheat flour and cosmetics manufacturing process of functional Keratin removal soap at the small and medium enterprise style. We measured explosive pressure and explosive lower limit which follows in change of concentration change at the time of talc addition uses Hartman dust explosion apparatus, also measured weight loss and endothermic quantity uses DSC and TGA. The explosion test results show that increased explosive lower limit concentration and explosive pressure decreased by the increased ratio of the talc dust. And the DSC results show that heat flux and temperature decreased by the increased ratio of the talc dust. Also increased in raising temperature causes initial smoldering temperature to move towards low temperature section and the endothermic quantity increased on a large scale. Together the TGA results show that weight loss decreased by the increased ratio of the talc dust. From this research we have assured the successive dust explosion mechanism study will play a key role as a significant safety securing guideline against the dust explosion.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.9-15
• /
• 2012

We prepared a series of aromatic liquid crystals (LCs) based on wholly aromatic ester units with the reactive end group methyl maleimide by means of melt condensation method, and the resulting LCs were thermally crosslinked to produce liquid crystalline thermoset (LCT) films. The synthesized LCs and LCTs were characterized with Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermomechanical analysis (TMA), and polarizing optical microscopy (POM) with a hot stage. The glass transition temperature ($T_g$) and coefficient of thermal expansion are strongly affected by the mesogen units in their main chain structures. The $p$-substituted biphenyl LC was found to have the highest thermal property value.