• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.667-671
• /
• 2001

The Instant Messenger(IM) is the most popular personal communication tool today. IM is a tool that can substitute E-mail for a person, and can secure the user for a company. Further, it is claimed as it has a limitless potential. However, there has been several reports on security issues. It has known that the transmitting message is not secured for the attacks, and hacking tools has been developed. In addition, several reports has been made regards to the vulnerability. In other words, anyone can been through and manipulate the messages that are sent or received via IM. This is a barrier for the IM to be developed as a corporate's strategic tool, and furthermore, it will create serious personal privacy issue. IETF IMPP Working Group is preparing a standard mutual relationship between IM. However, it is complicated due to the American On-Lines's absence, whom has ensured the most number of IM users. There was a discussion only about the form of the transmitting data, but it is insufficient state to discuss the security service for general. In this paper, I design and implement the Secure Instant Messaging System, to solve the IM's vulnerability and the security issue presented above.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.3
• /
• pp.230-237
• /
• 2011

The study was performed to investigate the characteristics of charcoal and temperature change of a kiln's inner and outer walls in carbonization process using improved kiln. In this kiln system, carbonization process was completed in eight days. In the kiln, the ignition temperature was kept about $720^{\circ}C$. And then the temperature were increased gradually prior to be refined. Finally, the temperature in refining process was reached to maximum point, $1,000^{\circ}C$. In the chimney, the temperature was increased gradually from $90^{\circ}C$ at ignition to $750^{\circ}C$ at refining. The temperature change of the kiln wall resembles a temperature change progress curve during a carbonization process. The highest temperature of the kiln wall that appeared by a carbonization process was around $500^{\circ}C$. As a result of having measured an inner wall and the outer wall of the kiln using an infrared thermography camera, it was judged with there being considerable latent heat on kiln wall and ceiling. Fixed carbon contented of charcoal was 85.9~89.9%. Refining degree of charcoal, hardness, calorific value and pH were l, 12, 7,047~7,456 kcal/kg, 9.0~9.9, respectively. The yield of wood charcoal was 13.8%, and compared to conventional kiln's yield increased 1.5%.

• Journal of Bio-Environment Control
• /
• v.12 no.3
• /
• pp.107-113
• /
• 2003

This study was carried out to improve the performance of pre-developed heat recovery devices attached to exhaust-gas flue connected to combustion chamber of greenhouse heating system. Four different units were compared in the aspect of heat recovery performance; A-, B-, and C-types are exactly the same with the old ones reported in previous studies. D-type newly developed in this experiment is mainly different with the old ones in its heat exchange area and tube thickness. But airflow direction(U-turn) and pipe arrangement are similar with previous three types. The results are summarized as follows; 1. System performances in the aspect of heat recovery efficiency were estimated as 42.2% for A-type, 40.6% for B-type, 54.4% for C-type, and 69.2% for D-type. 2. There was not significant improvement of heat recovering efficiency between two different airflow directions inside the heat exchange system. But considering current technical conditions, straight air flow pattern has more advantage than hair-pin How pattern (U-turn f1ow). 3. The main factors influencing on heat recovery efficiency were presumably verified to be the total area of heat exchange surface, the thickness of ail-flow pipes, and the convective heat transfer coefficient influenced by airflow velocity under the conditions of allowable pipe durability and safety. 4. Desirable blower capacity for each type of heat recovery units were significantly different to each other. Therefore, the optimum airflow capacity should be determined by considering in economic aspect of electricity required together with the optimum heat recovery performance of given heat recovery systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.17-26
• /
• 2010

This is concerned with the technology to monitor the vehicle operation, failure and disorder by using WiBro portable device. More precisely, the technology makes it possible that the information collection device is connected to both ECU(Electronic Control Unit) which is the device for controlling engine, transmission, brake, air-bag, etc that are connected to in-vehicle network and OBD-II connector that is for data collection from various sensors. In addition, with a WiBro portable device (cell phone, PDA, PMP, UMPC, etc). equipped with a vehicle diagnostic programs, information for operation, failure and malfunction can be obtained and analyzed in real-time, and alarm is alerted when the vehicle is in abnormal status, which makes the early reactions to the status. Furthermore, the collected data can be sent through WiBro network to the server managed by the company specialized in managing the vehicles, thus the technology could help the drivers who have less knowledge about their auto-vehicles have safe and economic driving. There is always a possibility of malfunction due to various types of noise that are caused by wring-harness when the device is wired-connected. In this research, in order to overcome this problem, we propose a system configuration that can do monitoring and diagnosis with a device for collecting data from vehicle and a personal WiBro device. Also, we performed research on data acquisition and interlock for the system defined by the definition for information and data sharing platform.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.87-95
• /
• 2002

Three different species of green and air-dried Korean bamboos were carbonized by using three different types of kilns designated as special (800~1000℃), improved (600~700℃) and simple kiln (400~500℃), and the bamboo vinegars obtained from the carbonization processes were characterized. In the case of the special kiln, most of the bamboo vinegars obtained at the first recovery stage showed high values of specific gravity and also in content of organic acid and water-soluble tar. The bamboo vinegars obtained from the improved kiln showed various physical properties depending on their species. In the case of simple kiln, the bamboo vinegars obtained from air-dried bamboos and at temperatures below 80℃, showed a higher specific gravity and more water-soluble tar as well as total organic components than those obtained at 80~150℃. A good linear relationship (correlation coefficient of ca. 0.90) was obtained between the specific gravities and the sum of organic acids and water-soluble tars. Therefore, this correlation coefficient might be a good index to determine the quality of bamboo vinegars. The major chemical constituents of the bamboo vinegars were acetic acid and considerable amounts of phenols: guaiacol, ethyl guaiacol, syringol, and methyl syringol.