• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.6 no.1
• /
• pp.24-30
• /
• 2000

Chitosan films were prepared using four types of chitosans with different molecular weight and the effect of molecular weight of chitosan on selected film properties such as color, water vapor permeability (WVP), water solubility (WS), tensile strength (TS), and elongation at break (E) was investigated. Generally, the total color difference (${\Delta}E$) and WS of the films decreased, while TS and E of the films increased as molecular weight of chitosan increased. WVP of the films did not show any significant relationship with molecular weight of chitosan.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.176-181
• /
• 1996

중수로 원자로에서 핵심 구조물인 압력관은 합금이 사용되고 있는데, 고온, 고압의 방사선 분위기에서 사용되기 때문에 가동중 변형을 받는다. 따라서 본 연구에서는 압력관의 건전성 평가기술을 확보하기 위하여 Zr-2.5wt.% Nb 압력관의 집합조직과 온도 변화에 따른 강도 특성을 조사하였다. 집합조직의 변화는 시편의 채취방향을 달리하여 네 가지의 집합조직 변화를 주었으며, 이들 시편에 대해 상온에서 부터 45$0^{\circ}C$까지 온도를 변화시가면서 인장시험을 실시하였다. 온도가 증가함에 따라 시편의 집합조직과 관계없이 네 종류의 시편 모두가 30$0^{\circ}C$까지는 강도가 직선적으로 감소하는 현상을 보이며, 30$0^{\circ}C$에서 37$0^{\circ}C$ 사이의 온도에서 강도가 약간 증가하는 현상을 보였다. 또한 37$0^{\circ}C$이상의 온도에서는 강도가 다시 직선적으로 감소하는 경향을 나타냈다. 이 같은 현상은 30$0^{\circ}C$ 까지는 프리즘 슬림(-slip)으로 전위가 움직이다가 30$0^{\circ}C$ 이상의 온도에서부터 37$0^{\circ}C$까지는 피라미드 슬림(-slip)계의 경쟁 상호작용에 의한 추가적인 응력이 필요하여 나타난 현상이라 사료된다. 온도의 변화에 따른 강도와 연신율의 curve에서 30$0^{\circ}C$와 37$0^{\circ}C$의 범위에서 plateaus region과 연신율이 최소값을 갖는 것은 동적변형시효(dynamic strain ageing)현상과 관련이 있는 것으로 생각되나 추가적인 연구가 필요하다. 집합도가 변함에 따라 인장강도는 T(transverse)>L(longitudinal)> 30。> 45 。순으로 나타났으며 이는 slip과 twin의 복합적인 작용에 의한 것으로 해석된다.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.344-349
• /
• 2005

Polyurethanes(PUs) were synthesized by reaction of isophorone diisocyanate, acetylbutyl citrate, and 3 types of polycaprolactone diol. Their structures were confirmed by FT-IR and NMR spectrometer. And, their thermal and mechanical properties were measured by TGA ud UTM. The effective network chain lengths ($\bar{M}_c$), measured by compressive modulus apparatus, were about $8000\~24000$ g/mol. As crosslinking density and amount of hard segment increased, tensile strength increased and elongation decreased. As the crosslinking density of PUs increased, thermal property inproved. When the ratio of NCO/OH is 1.1, maximum crosslinking density was achieved.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.1
• /
• pp.51-58
• /
• 2010

ETFE is the abbreviation of Ethylen Tetra Fluoro Etylene, a sort of colorless and transparent granules. The advantage ETFE film has daylight transmission and chemical the resistance and The thickness of ETFE film is used to from $50{\mu}m$ to $300{\mu}m$ and tensile strength of ETFE film changes from 40MPa to 60MPa and the tensile strain at break can get to about 300-400%. In this paper, ETFE film carried out the tensile proprieties, such as the tensile strain at break, the tensile strength are examined.

• Journal of Korea Foundry Society
• /
• v.41 no.4
• /
• pp.349-356
• /
• 2021

Effects of cooling condition after solidification on the microstructure and the mechanical properties of 0.36Mn containing ductile cast iron have been studied based on the minimized addition of Cu and Sn for vehicle component applications with better quality and cost competitiveness. Cu and Sn were selected for additional elements judging from the well-known fact of strong tendency of pearlite promotion followed by the tensile property improvement. After pouring of the Mg treated cast iron melt with various chemical compositions into the block specimens, two ways of post solidification cooling conditions were applied for comparison; both cooling in the mold and cooling in the air after dismantle at 800℃. The pearlite fraction of the mold-cooled specimens was analyzed as 27-44%, with the tensile strength and elongation of 513-568N/mm² and 10.4-14.3%, respectively. Whilest, the air cooled specimens showed the pearlite fraction of 77~85%, with the tensile strength and elongation of 728~758N/mm² and 3.2~6.0%, respectively. It is worthwhile to note that the remarkable improvement of both tensile strength and elongation of the ductile iron was achieved by the present air cooling condition with the minimized combined addition of Cu and Sn to the 0.36Mn containing ductile iron.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.111-114
• /
• 2002

실크는 우수한 광택, 촉감, 물성을 바탕으로 하여 인류에 있어 최고의 의류용 섬유로서 널리 이용되어 왔으며 최근에는 생체적합성 등을 활용한 의료용 및 생물공학용 소재로서 응용하고자 하는 연구가 활발하게 진행중이다[1-2]. 그러나 실크는 합성섬유와는 달리 누에가 토사하는 그 순간에 그 구조 및 형태가 결정되어 고정되는 단점을 안고 있어 다양한 특성이 요구되는 의류용 및 산업용 분야로의 응용에 한계가 있다. (중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.149-153
• /
• 2002

1968년 Phillips Petroleum사에 의해 개발된 LLDPE(linear low density polyethylene)는 저가이며 인장강도, 연신율 등의 뛰어난 기계적 물성으로 인해 각종 필름, 코팅제, Cable용으로 사용되고 있다. 일반적으로 LLDPE의 용융점은 12$0^{\circ}C$정도이나 이보다 매우 낮은 온도에서 연화되어 기계적 물성이 급격히 저하되므로 Coating재료, 단열Cable, 내열성 Film분야 등의 용도에는 사용상 제약을 받는다. 반면 Silicone은 난연성, 내열성, 내화학특성 및 전기절연성이 우수하여 공업재료로 널리 사용되지만 기계적물성, 저온취성, 고가인 단점이 있어 용도에 따라 일반재료로는 사용하기 어렵다.(중략)

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.151-157
• /
• 1996

Cr 함량이 alloy 600과 alloy 690의 Cr함량 사이에 위치하는 Ni-Cr-Fe 합금을 진공유도 용해법을 이용하여 제조하였다. 합금 인고트에 대하여 열간 가공성 시험을 수행하여 열간 압연 조건을 구하였다. 열간 및 냉간 압연을 거친 시편을 900~120$0^{\circ}C$ 사이의 여러 온도에서 소둔 열처리하였고, 열처리한 시편에 대하여 기계적 특성과 부식특성을 측정, 분석하였다. Cr 함량은 기계적 강도에는 다소 영향을 미치는 것이 발견되었으나 연신율에는 거의 영향을 미치지 않는 것으로 나타났다. 부식속도는 Cr 함량 변화보다 소둔 열처리 온도에 따라 증가하였으며, 110$0^{\circ}C$ 에서 열처리한 경우에는 부식속도가 얼마간 감소하는 것으로 나타났다.

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.45-52
• /
• 2002

The separator made from the blends of high density polyethylene (HDPE) and ultrahigh molecular weight polyethylene (UHMWPE) was prepared by wet processing to use as Li-ion secondary battery. We investigated effects of the blending of the polymers and the film extension on the mechanical properties of the separator. The mechanical strength of separator increased with increasing molecular weights and contents of UHMWPE, for instance about $1000 kg/\textrm{cm}^2$ with the five times extended film of 6 wt% UHMWPE. The pores of the separator were very uniform with the size of 0.1~$0.12\mu\textrm{m}$. The shut-down characteristic quickly increased at around $130^{\circ}C$ and the fusion temperature was $160^{\circ}C$, so it could be applied to the lithium ion secondary battery.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.26-34
• /
• 2000

The considerations for remaining life of ACSR (Aluminum Stranded Conductors Steel Reinforced) in transmission lines have become gradually important to hold reliability and stability of power supply. The remaining life of ACSR exposed to the atmosphere for a long period may rely on deterioration caused by environmental indices such as atmospheric corrosion, galvanic corrosion, crevice corrosion and fatigue corrosion. One of reduction of useful life in overhead transmission lines built on the ridge of mountain is often caused by forest fires.This paper deals with investigation of strength deterioration performance of ASCR due to fires through several testing and analyzing data for tension load and extension of blazed ACSR. Test samples are ACSR 480[$\textrm{mm}^2$] conductors, which are artificially fired to regular durations. Mechanical properties such as tension load and extension for fired ACSR conductors are tested and estimation functions for mechanical performances corresponding to fire duration are determined. As a result, it can be verified that both tension load and extension of ACSR are reduced by increasing fire duration. Hence, it is obvious that ACSR due to forest fires may lead to mechanical deterioration.