• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.121-130
• /
• 2011

Space frame structures have the advantage of constructing a large space structures without column and it may be considered as a shell structure. Nevertheless, with the characteristics of thin and long term of spacing, the unstable problem of space structure could not be set up clearly, and there is a huge difference between theory and experiment. Therefore, in this work, the tangential stiffness matrix of space frame structures is studied to solve the instability problem, and the nonlinear incremental analysis of the structures considering rise-span ratio(${\mu}$) and the ratio of load($R_L$) is performed for searching unstable points. Basing on the results of the example, global buckling can be happened by low rise-span ratio(${\mu}$), nodal buckling can be occurred by high rise-span ratio(${\mu}$). And in case of multi node space structure applying the ratio of load($R_L$), the nodal buckling phenomenon occur at low the ratio of load($R_L$), the global buckling occur a1 high the ratio of load($R_L$). In case of the global buckling, the load of bifurcation is about from 50% to 70% of perfect one's snap-through load.

• Tuberculosis and Respiratory Diseases
• /
• v.39 no.2
• /
• pp.141-149
• /
• 1992

In order to establish predicted normal values of volume of isoflow($V_{iso}\dot{V}$), $V_{iso}\dot{V}$ were measured in a total 234 healthy adults, consisting of 78 male nonsmokers, 108 male smokers and 48 female nonsmokers. The volumes of isoflow were determined through analysis of maximal expiratory flow volume curves recorded with a mixture of 80% helium and 20% oxygen(He-$O_2$ gas) following one(1VC) and three vital capacity(3VC) maneuver and with room air. Based upon the correlation of the observed values of the parameters to age and physical characteristics, the following regression formulars for the prediction of the parameters, using age in year(A) as a variable, were obtained. 1VC method ($V_{iso}\dot{V}_1$) Male smoker : 0.614A+2.347 Male nonsmoker : 0.370A-2.792 Female nonsmoker : 0.588A-2.459 3VC method ($V_{iso}\dot{V}_3$) Male smoker : 0.467A+1.696 Male nonsmoker : 0.288A-1.538 Female nonsmoker : 0.367A-0.114.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.4
• /
• pp.109-122
• /
• 1983

An accurate thick beam element (TB4) which includes the effects of the shear deformation and rotatory inertia has been degenerated from the three dimensional continuum by employing the Timoshenko beam assumptions. The proposed TB4 element has four nodes and two degrees of freedom at each node, totally eight degrees of freedom. The transverse deflection W and plane rotation ${\theta}$ with the cubic interpolation functions are selected as nodal variables. The element characteristics are formulated by discretizing the beam equations of motion, using the Galerkin weighted residual method, and are numerically integrated by the reduced shear integration technique, using the three-point Gauss quadrature with the various shear coefficients. Several numerical examples are analyzed to demonstrate the accuracy and the monotonic convergence behavior of the proposed TB4 beam element. The result indicates that the TB4 element shows the more excellent performance and the monotonic convergence behavior than the other existing Timoshenko beam type elements for the whole range of the beam aspect ratios, in both static and free vibration analyses.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.185-192
• /
• 2015

In this study, the adsorption efficiency of mixed heavy metals in aqueous solution was investigated using modified activated carbon. Moreover, the heavy-metal stabilization treatment of contaminated marine sediment was achieved using modified activated carbon as stabilizing agents. From the experimental results, it was shown that the adsorption equilibrium was attained after 120 mins. Heavy metal adsorption was characterized using Freundlich and Langmuir equations. The equilibrium adsorption data were fitted well to the Langmuir model in modified activated carbon. The adsorption uptake of $As^{3+}$ (28.47 mg/g) was higher than $Cr^{6+}$ (13.28 mg/g). In case of the $Cr^{6+}$, the results showed that adsorption uptake decreased with increasing pH from 6 to 10. However, adsorption of $As^{3+}$ slightly increased in the increasing change of pH. The modified activated carbon was applied for a wet-curing duration of 120 days. From the sequential extraction results, the exchangeable, carbonate, and oxides fractions of Cr and As in sediment decreased by 5.8% and 7.6%, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1427-1435
• /
• 2010

A mixed finite element model was developed using the classical plate theory to analyze the nonlinear bending of a plate. The appropriate weight functions for the constraints integrated over the domain were determined by the Lagrange multiplier method by using the principle of minimum virtual energy; which provides the constitutive relations between force-like variables and strains. All of detail terms of element wise coefficient matrices and associate tangent matrices to be used in the Newton iterative method are presented. Then, the linear solutions of the current model and those of the traditional displacement model under the SS (simple support) boundary conditions were compared with the existing analytical solution. The post-processed images of the nonlinear results of the force-like variables are presented to show the continuity of the solutions at the joint of the element boundaries. Finally, the converged nonlinear finite element solutions of the current model are compared with those of existing traditional displacement model.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.4
• /
• pp.12-20
• /
• 2001

The temporal variability in near-field mixing characteristics of discharging plumes in oceanic environment was investigated using the time series data of the buoyant jet parameters. Based on the currents and density profiles observed in Masan outfall site and effluent discharge flowrates for 63days of summer season, the temporal variabilities and those occurrence frequency were obtained by line plume equations. The results show that wide range of variability in Masan outfall's mixing characteristics was found due to the temporal changes of effluent flowrates and ambient oceanic conditions. The near-field dilution was in the range of 30~71 with the averaged dilution of 34, which was a good agreement with field measurements of salinity deficit. The length of mixing zone was in the range of 5.4~36.2 m with the average of 9.5 m, and the plume rise height was in the range of 8.1~10.2 m with the average of 8.9 m. However, only the 30~44% of the whole results are higher than the averages, which indicates the necessity of this frequency analysis with the continuously measured data for designing and managing the ocean outfall system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.5
• /
• pp.306-314
• /
• 2006

Instrumented indentation technique is a new way to evaluate nondestructive such mechanical properties as flow properties, residual stress and fracture toughness by analyzing indentation load-depth curves. This study evaluated quantitatively the flow properties of steels and residual stress of weldments. First, flow properties can be evaluated by defining a representative stress and strain from analysis of deformation behavior beneath the rigid spherical indenter and the parameters obtained from instrumented indentation tests. For estimating residual stress, the deviatoric-stress part of the residual stress affects the indentation load-depth curve, so that by analyzing the difference between the residual-stress-induced indentation curve and residual-stress-free curve, the quantitative residual stress of the target region can be evaluated. The algorithm for flow property evaluation was verified by comparison with uniaxial tensile test and the residual stress evaluation model was compared to mechanical cutting and ED-XRD results.

• Composites Research
• /
• v.26 no.6
• /
• pp.363-372
• /
• 2013

Numerical simulation for Resin Transfer Molding manufacturing process is attempted by using the eXtended Finite Element Method (XFEM) combined with the level set method. XFEM allows to obtaining a good numerical precision of the pressure near the resin flow front, where its gradient is discontinuous. The enriched shape functions of XFEM are derived by using the level set values so as to correctly describe the interpolation with the resin flow front. In addition, the level set method is used to transport the resin flow front at each time step during the mold filling. The level set values are calculated by an implicit characteristic Galerkin FEM. The multi-frontal solver of IPSAP is adopted to solve the system. This work is validated by comparing the obtained results with analytic solutions. Moreover, a localization method of XFEM and level set method is proposed to increase the computing efficiency. The computation domain is reduced to the small region near the resin flow front. Therefore, the total computing time is strongly reduced by it. The efficiency test is made with a simple channel flow model. Several application examples are analyzed to demonstrate ability of this method.

• Journal of the Korean Vacuum Society
• /
• v.2 no.2
• /
• pp.236-245
• /
• 1993

Single crystals, SbSI : V, SbSeI : V, BiSI : V, BiSeI : V, SbSI : Cr, SbSeI : Cr, BiSI : Cr, BiSeI : Cr, SbSI : Ni, SbSeI : Ni, BiSI : Ni, and BiSeI : Ni were grown by the vertical Bridgman method. It is found that the grown single crystals have an orthorhombic structure and the indirect optical transitions. The temperature dependence of energy gap shows the two reflection point related with the phase transitions and is well fitted with Varshni equation in the continuous region. The optical absorption peaks due to the doped impurities (V, Cr and Ni) are respectively attributed to the electron transitions between the split energy levels of $V^{+2}$, $Cr^{+2}$ and $Ni^{+2}$ ions sited at $T_d$ symmetry of the host lattice.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.234-234
• /
• 2012

Saddle field ion source는 구조가 간단하고 영구자석을 사용하지 않아 소형화에 유리하고 구조가 간단한 DC 파워서플라이를 이용하기 때문에 장치 가격이 저렴하여 다양한 분야에서 응용되고 있으며 특히 이온빔 밀링 분야에 많이 사용된다. 초기 saddle field ion source 는 대칭형의 구형이었으나 지속적인 연구 개발로 와이어형, 원판형, 원통형 등 다양한 형태의 saddle field ion source가 개발되었다. 본 연구에서는 비교적 제작이 용이하고, 구조적으로 외부간섭에 대하여 덜 민감한 원통형 saddle field ion source를 제작하였다. 초기 saddle field ion source는 이온원 내부에 saddle field를 형성하기 위하여 대칭 구조를 가지 형태로 제작되었으나, 비대칭 구조에서도 saddle field가 형성될 수 있고 비대칭 구조를 채택할 경우 한쪽으로 더 많은 이온빔을 인출할 수 있기 때문에 실제 응용면에서는 비대칭 구조가 더 유리하다. 따라서 본 연구에서는 원통형 비대칭 saddle field ion source를 제작하였으며, 제작된 이온소스는 높이가 62 mm 지름이 55 mm의 소형 이온소스였다. 제작된 원통형 saddle field ion source는 진공도와 가속전압에 따라 방전 모드 변화하였다. Saddle field ion source는 전극과 extractor의 구조에 따라 조금씩 다르지만 대체로 5x10-5 Torr ~ 5x10-4 Torr 영역에서 안정적으로 작동하였다. 이온소스 내부의 압력이 높을 경우 수십 mA 의 방전 전류가 흐르는 고전류 방전 모드로 작동하였으며 압력이 낮을 경우에는 동일한 전압에서 수 mA 의 방전 전류만 흐르는 저전류 방전 모드로 작동하였다. 압력이 더 높아질 경우 아크 방전이 발생하여 이온소스의 작동이 불안정하여 연속적인 작동이 어려웠다. 고전류 방전 모드에서는 이온빔 전류가 Child-Langmuir 방정식에 따라 Vi3/2에 비례하여 증가하는 경향을 보여주었으며 저전류 방전 모드에서는 Vi에 선형적으로 증가하였다. 가속 전압이 동일한 경우 고전류 방전 모드가 저전류 방전 모드에 비하여 더 많은 이온빔 인출이 가능하지만, 고전류 방전 모드의 경우 이온의 방출 각도가 매우 넓은 반면 저전류 방전 모드에서는 이온빔의 퍼짐이 현저히 줄어듦을 관찰할 수 있었다. 원통형 saddle field ion source는 내부 구조가 간단하기 때문에 내부 전극의 구조 변화에 따라 방전 특성 및 이온빔 인출 특성이 심하게 변동하였다. Saddle field ion source에서는 Anode에 인가되는 방전 전압이 가속 전압과 같은 역할을 하는데 가속 전압은 2~10 kV 사이에서 인가가 가능하였다. 일반적으로 동일한 방전 모드에서 진공도가 높아질수록 방전 전류의 양과 인출되는 이온의 양이 증가하는 것이 관찰되었다. 제작된 이온소스는 최적 조건에서 5 mm 인출구를 통하여 0.7 mA의 이온빔 인출이 가능하였으며, 9 mm 인출구를 사용한 경우 1 mA까지 이온빔 인출이 가능하였다.