• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.89-97
• /
• 2007

Objective: The purpose of this study was to measure the insertion torque of orthodontic miniscrews regarding changes in their shape, diameter, and length. Methods: Torque values were measured during continuous insertion of the miniscrews into solid rigid polyurethane foam, using a torque tester of driving motor type with a regular speed of 3 rpm. Orthodontic miniscrews (Biomaterials Korea, Seoul, Korea) of cylindrical type and taper type were used. Results: Increasing the length and diameter of the miniscrews increased the maximum insertion torque value in both cylindrical and taper type screws. Insertion torque was increased at the incomplete head of the cylindrical type screw, and at the tapered part of the taper type screw. The insertion torque value of miniscrews was influenced most by diameter, then shape and length. As a result, it was shown that the diameter of the screw had the most influence on insertion torque, and the taper type screw had a higher torque value than the cylindrical type screw. Conclusion: Therefore, a large diameter or taper type screw are adequate for areas of thin cortical bone with a large interdental space, and a small diameter or cylindrical type screw are adequate in the mandibular molar area or the midpalatal area having thick cortical bone.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.233-242
• /
• 1997

The main purpose of this paper is to investigate the dynamic optimal design of continuous beams. The computer-aided optimization technique is used to obtain the near-optimal parameters of continuous beam. The computer program is developed to obtain the natural frequency parameters and the forced vibration responses to a transit point load for the continuous beam with variable support spacing, mass and stiffness. The model test data is in good agreement with the computer calculation, which serves to validate the mathematical analysis. The optimization function to describe the design efficiency is defined as a linear combination of four dimensionless span characteristics; the maximum dynamic stress; the stress difference between span segments; the rms deflection under the transit point load; and the total span mass. Studies of three span beams show that the beam with near-optimal parameters can improve design efficiency when compared to a uniform beam with even spacing of the same total span length.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.213-213
• /
• 1999

현재 LCD용 기판재료는 ITO/glass를 전극으로 사용하고 있다. 그러나 유리기판은 무겁고 깨지기 쉽기 때문에 사용상 곤란한 점이 많다. 최근 flexible하고 가공성 및 생산성이 우수한 플라스틱한 ITO를 성막하여 EL용, Touch panel, plastic LCD용 사용하려는 시도로, roll-to-roll 연속 스퍼터링에 의한 ITO성막공정에 대한 연구가 최근 활발하게 이루어지고 있다. 폴리머는 유리에 비해 Tg 온도가 낮고, 기판으로부터의 수분 및 여러 종류의 가스방출이 심하기 때문에 유리와는 달리 ITO막의 제조에 있어 큰 차이점이 있다. 따라서, 폴리머에 반응성 스퍼터링을 하기 위해서는 표면처리가 중요한 변수가 되며, roll to roll sputter로 ITO 필름을 얻기 위해서는 폭과 길이 방향으로 균일한 막을 얻는 것이 중요하다. 두께 75$\mu\textrm{m}$, 폭 190mm, 길이 400m로 권취된 광학용 Polyethylene terephthalate(PET:Tg:8$0^{\circ}C$)위에 In-10%Sn의 합금타겟과 Unipolar pulsed DC power supply를 사용하여 반응성 마그네트론 스퍼터링 방법으로 0.2m/min의 속도로 연속 스퍼터링 하였다. PET를 Ar/O2 혼합가스로 플라즈마 전처리를 한 후, AFM, XPS를 이용하여 효과를 분석을 하였고, 성막전에 가스방출을 막기 위해 TiO를 코팅하였다. Pilot 연속 생산공정에서 재현성을 위해 PEM(Plasma Emission Monitor)의 optical emission spectroscopy를 이용, 금속과 산화물의 천이구역에서 sprtter된 I/Sn 이온과 산소 이온의 반응에 의한 최적의 플라즈마의 강도값을 입력하여 플라즈마의 radiation을 검출하고, 스퍼터링 공정중 실질적인 in-situ 정보로 이용하였다. PEM을 통하여 In/Sn의 플라즈마 강도변화를 조사하였다. 초기 In/Sn의 플라즈마 강도(intensity)는 강도를 100하여, 산소를 주입한 결과, plasma intensity가 35 줄어들었고, 이때 우수한 ITO 박막을 얻을 수 있었다. Pulsed DC power를 사용하여 아크 현상을 방지하였다. PET 상에 coating 된 ITO 박막의 표면저항과 광투과도는 4-point prove와 spectrophotometer를 이용하여 분석하였고, AES로 박막의 두께에 따른 성분비를 확인하였다. ITO 박막의 광투과도는 산소의 유량과 sputter 된 In/Sn ion의 plasma emission peak에 따라 72%-92%까지 변화하였으며, 저항은 37$\Omega$/$\square$ 이상을 나타내었다. 박막의 Sn/In atomic ratio는 0.12, O/In의 비율은 In2O3의 화학양론적 비율인 1.5보다 작은 1.3을 나타내었다.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.10-20
• /
• 2010

This paper presents chunking strategy of a contiguous nouns sequence using semantic class. We call contiguous nouns which can be treated like a noun the compound noun phrase. We use noun pairs extracted from a syntactic tagged corpus and their semantic class pairs for chunking of the compound noun phrase. For reliability, these noun pairs and semantic classes are built from a syntactic tagged corpus and detailed dictionary in the Sejong corpus. The compound noun phrase of arbitrary length can also be chunked by these information. The 38,940 pairs of 'left noun - right noun', 65,629 pairs of 'left noun - semantic class of right noun', 46,094 pairs of 'semantic class of left noun - right noun', and 45,243 pairs of 'semantic class of left noun - semantic class of right noun' are used for compound noun phrase chunking. The test data are untrained 1,000 sentences with contiguous nouns of length more than 2randomly selected from Sejong morphological tagged corpus. Our experimental result is 86.89% precision, 80.48% recall, and 83.56% f-measure.

• Journal of the Korean Chemical Society
• /
• v.38 no.8
• /
• pp.576-584
• /
• 1994

The method described offers rapid and efficient sample preparation using on-line microwave digestion of metal oxides in water sample with direct elemental detection by ICP-AES. The open tubing digestion system(OTD) and the restraint tubing digestion system(RTD) for flow injection(FI) were designed and tested to find the optimum conditions. Comparison of OTD and RTD indicated that RTD was 3 times faster on the digestion time, and 10 times higher on sample mass. Finally, the results of RTD agree well with those by conventional microwave open vessel in all cases and show good precision; Fe and Cu show good with about 5% of RSD, while Zn and Co more or less than 10% RSD.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.407-414
• /
• 2002

In this paper, we present a method that automatically generates concatenate morpheme based language models to improve the performance of Korean large vocabulary continuous speech recognition. The focus was brought into improvement against recognition errors of monosyllable morphemes that occupy 54% of the training text corpus and more frequently mis-recognized. Knowledge-based method using POS patterns has disadvantages such as the difficulty in making rules and producing many low frequency concatenate morphemes. Proposed method automatically selects morpheme-pairs from training text data based on measures such as frequency, mutual information, and unigram log likelihood. Experiment was performed using 7M-morpheme text corpus and 20K-morpheme lexicon. The frequency measure with constraint on the number of morphemes used for concatenation produces the best result of reducing monosyllables from 54% to 30%, bigram perplexity from 117.9 to 97.3. and MER from 21.3% to 17.6%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.3
• /
• pp.273-279
• /
• 2011

The yield strength of particle-reinforced composites increases as the size of the particle decreases. This kind of length scale has been mainly attributed to the geometrically necessary dislocation punched around the particle as a result of the mismatch of the thermal expansion coefficients of the particle and the matrix when the composites are cooled down after consolidation. In this study, two dislocation-punching theories that can be used in continuum structural modeling are assessed numerically. The two theories, presented by Shibata et al. and Dunand and Mortensen, calculate the size of the dislocationpunched zone. The composite yield strengths predicted by finite element analysis were qualitatively compared with experimental results. When the size of the particle is less than $2{\mu}m$, the patterns of the composite strength are quite different. The results obtained by Shibata et al. are in qualitatively better agreement with the experimental results.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.1
• /
• pp.35-42
• /
• 2016

This paper presents the structural analysis of two-span structures constructed by incremental launching method to traverse the existing facilities. The structure with a relatively short launching span can not be secure the structural stability caused by excessive deflection and overturning prior to reaching the maximum strength, because the length of the other span is different or the rear structure is not continuous. In order to estimate the stability of the construction stages of deflection and the overturning, the structural analysis was carried out. The parameters of the analysis is launching span ratio of the launching nose and the upper structure, weight ratio and so on. From the analysis result, the effects of parameters were investigated and a deflection formula of the launching nose and the condition of the overturning of structure were proposed.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.3
• /
• pp.206-212
• /
• 2013

This study accessed the adsorption characteristics of the 11 perfluorinated compounds (PFCs) on coal-based granular activated carbon (GAC). The breakthrough appeared first for PFODA and sequentially for PFHDA, PFTeDA, PFTDA, PFDoDA, PFUnDA, PFDA, PFNA, PFOA, PFOS, and PFHpA. The maximum adsorption capacity (X/M) for the 11 PFCs with apparent breakthrough points ranged from 2.43 ${\mu}g/g$ (for PFODA) to 64.5 ${\mu}g/g$ (for PFHpA). Carbon usage rate (CUR) for PFODA was 0.291 g/day, 11.2 times higher than that for PFHpA (0.026 g/day). The X/M values for the 11 PFCs were fitted well with a linear regression ($r^2$ = 0.89) by their molecular weight (chain length).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.57-60
• /
• 2020

순위다중패턴매칭문제는 길이가 n인 텍스트 T와 패턴들의 집합 P' = {P₁,P₂…,P_k}가 주어졌을 때, P'에 속하는 패턴들과 상대적인 순위가 일치하는 T의 모든 부분문자열들의 위치를 찾는 문제이다. P'에서 가장 짧은 패턴의 길이가 m, 가장 긴 패턴의 길이를 $\bar{m}$, 모든 패턴들의 길이의 합을 M, q개의 연속된 문자들을 q-그램이라 할 때, 기존에 텍스트의 핑거프린트를 이용하여 순위다중패턴매칭문제를 $O(q!+nqlogq+Mlog\bar{m}+nM)$ 시간에 해결하는 알고리즘이 제시되었다. 본 논문에서는 텍스트의 핑거프린트를 활용하여 O(max(q!,M,n))개의 스레드를 이용하여 순위다중패턴매칭문제를 평균적으로 $O(\bar{m}+qlogq+n/q!)$ 시간에 해결하는 병렬 구현 방법을 제시한다. 실험 결과, n = 1,000,000, k = 1,000, m = 5, q = 3일 때, 본 논문에서 제시하는 병렬 구현 방법은 기존의 순차 알고리즘보다 약 19.8배 빠르게 수행되었다.