• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.23-30
• /
• 2008

The basic research of context aware in ubiquitous environment is an internet technique and XML. The XML data of continuous stream type are popular in network application through the internet. And also there are researches related to query processing for streaming XML data. As a basic research to efficiently query, we propose not only a labeled ordered tree model representing the XML but also a mining method to extract frequent structures from streaming XML data. That is, XML data to continuously be input are modeled by a stream tree which is called by XFP_tree and we exactly extract the frequent structures from the XFP_tree of current window to mine recent data. The proposed method can be applied to the basis of the query processing and index method for XML stream data.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.2
• /
• pp.95-101
• /
• 2007

This paper presents the feasibilityof a thickness mode piezoelectric oscillator to detect damages in structures. The thickness mode oscillator sensor is composed of an electronic feedback oscillator circuit and a piezoelectric thickness mode vibrator to be attached to a structure of interest. Damage to the structure causes a change in the impedance spectrum of the structure, which results in a corresponding change of a resonant frequency of the structure. The oscillator sensor can instantly detect the frequency change in a very simple manner. Feasibility of the piezoelectric oscillator sensor was verified with a sample aluminum plate where artificial cracks of different lengths and number were imposed in sequence. Validity of the measurement was confirmed through comparison of the experimental data with the results of finite element analyses of a plate with cracks.

• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.171-178
• /
• 2007

Twelve reinforced concrete continuous deep beams having web openings within interior shear spans were tested to failure. All beams tested had the same geometrical dimensions. The main variables investigated were the opening size and amount of inclined reinforcement around openings. An effective inclined reinforcement factor combining the influence of the opening size and amount of inclined reinforcement on the structural behavior of the beams tested is proposed. It was observed that the load distribution, diagonal crack width, and load capacity of beams tested were greatly dependent on the effective inclined reinforcement factor which ranged from 0 to 0.171 for the test specimens. The higher this factor, the smaller the diagonal crack width and its development rate. A higher load capacity also developed in beams having effective inclined reinforcement factor above 0.077 than in the corresponding solid deep beams. A numerical technique based on the upper bound analysis of the plasticity theory is proposed to evaluate the load capacity of continuous deep beams having openings within interior shear spans. Predictions obtained from the proposed formulas are in good agreement with test results.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.192-202
• /
• 2020

Purpose: The purpose of this study is to prepare a more efficient operation alternative for both systems by comparing and analyzing the recently introduced COOP(Continutiry of Operation Plan) and existing NIPP(National Infrastructure Protection Plan). Method: The basic data of the two systems were collected for research and compared and analyzed by dividing them into the content and procedural aspects. In addition, The efficient operation alternative were derived for experts in the disaster area by utilizing AHP. Result: The National Infrastructure Protection Plan(NIPP) and the Continuity of Operation Plan(COOP) were found to be very similar in terms of content and procedures, and the AHP survey also found that integrating the two schemes was a more efficient and effective operation method. Conclusion: As the recently introduced the Continuity of Operation Plan(COOP) has a wider area of activity than the National Infrastructure Protection Plan(NIPP), and has a continuous management system structure with a more precise workframe, A more efficient national safety net will be realized by reorganizing and integrating it into a more enhanced the Continuity of Operation Plan(COOP) through readjustment of relevant laws and regulations.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.195-206
• /
• 2009

The deregulation of aviation markets in Europe and the United Sates had led airlines to reconfigure their networks into hub-and-spoke systems. Recent trends of "Open Skies" in the Asian aviation market are also expected to prompt the reformation of airlines' networks in the region. A significant connectivity index is a crucial tool for airlines and airport authorities to estimate the degree of hub-and-spoke operations. Therefore, this paper suggests a new index, Continuous Indirect Connectivity Index (CICI), for measuring the coordination of airlines' flight schedules, applying it to the Asian, European and the American aviation markets. CICI consists of three components：(i) temporal connectivity to identify the attractiveness between connection flights, (ii) spatial connectivity to differentiate the attractiveness by de-routing distance with continuous linear function, and (iii) relative intensity to reflect the effect of direct flight frequency on transfer routes. CICI is evaluated to examine a casual relationship through regression analyses with two dependent variables of the number of transfer passengers and transfer rates. Compared with Danesi's index and Doganis' index through evaluation processes, CICI has a higher coefficient value of determination, implying that it explains the relationship between connectivity and transfer passengers more precisely.

• Journal of Korean Elementary Science Education
• /
• v.42 no.1
• /
• pp.109-126
• /
• 2023

In this study, I took the evidence-explanation (E-E) continuum perspective to examine the epistemological implications of scientific reasoning cases designed by preservice elementary teachers during their simulation teaching. The participants were four preservice teachers who conducted simulation instruction on the seasons and high/low air pressure and wind. The selected discourse episodes, which included cases of inductive, deductive, or abductive reasoning, were analyzed for their epistemological implications-specifically, the role played by the reasoning cases in the E-E continuum. The two preservice teachers conducting seasons classes used hypothetical-deductive reasoning when they identified evidence by comparing student-group data and tested a hypothesis by comparing the evidence with the hypothetical statement. However, they did not adopt explicit reasoning for creating the hypothesis or constructing a model from the evidence. The two preservice teachers conducting air pressure and wind classes applied inductive reasoning to find evidence by summarizing the student-group data and adopted linear logic-structured deductive reasoning to construct the final explanation. In teaching similar topics, the preservice teachers showed similar epistemic processes in their scientific reasoning cases. However, the epistemological implications of the instruction were not similar in terms of the E-E continuum. In addition, except in one case, the teachers were neither good at abductive reasoning for creating a hypothesis or an explanatory model, nor good at using reasoning to construct a model from the evidence. The E-E continuum helps in examining the epistemological implications of scientific reasoning and can be an alternative way of transmitting scientific reasoning.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.252-252
• /
• 2016

최근 학계나 산업계에서 indium tin oxide (ITO)의 높은 전기 전도도 및 광투과율을 이용하여 줄 발열을 기초로 하는 투명 면상 발열체에 대한 연구가 활발히 진행 되고 있다. 하지만 단일 ITO 박막으로 제작한 투명 면상 발열체는 온도가 상승함에 따라 균일하게 발열 되지 않으며, 글라스의 곡면 부분에서 유연성이 부족하여 크랙이 발생하는 다양한 문제점들을 가지고 있다. 이를 해결하기 위해 ITO의 결정화 온도 $160^{\circ}C$ 이상의 고온공정 또는 증착 후 열처리가 필요 하는 추가적인 공정이 필요하다. 따라서 본 연구에서는 단일 ITO 박막의 단점을 개선하는 ITO/Ag/ITO 하이브리드 구조의 투명 면상 발열체를 제작하여 전기적, 광학적 특성을 비교하고 발열량, 온도 균일성, 발열 유지 안정도를 조사하였다. 본 연구에서는 $50{\times}50mm$ 크기의 non-alkali glass (Corning E-2000) 기판 상에 마그네트론 스퍼터링 공정으로 상온에서 ITO/Ag/ITO 박막을 연속적으로 증착 하여 다층구조의 하이브리드 형 투명 면상 발열체를 제조하였다. 박막 증착 파워는 DC (Ag) power 100 W, RF (ITO) power 200 W로 하였으며 ITO박막두께는 40 nm로 고정 시키고 Ag박막 두께는 10 ~ 20 nm로 변화를 주었다. 증착원은 3인치 ITO 단일 타깃(SnO2, 10 wt.%)과 Ag 금속 타깃 (순도 99.99%)을 사용하였으며, 고순도 Ar을 이용하여 방전하였으며 총 주입량은 20 sccm, working pressure는 1.0 Pa을 유지하였다. 증착전 타깃 표면의 불순물 제거와 방전의 안정성을 유지하기 위해 10분간 pre-sputtering을 진행하고 증착하였다. 증착한 박막의 전기적, 광학적 특성은 각각 Hall-effect measurements system (ECOPIA, HMS3000), UV-Vis spectrophotometer (UV-1800, SHIMADZU)으로 측정하였으며, 하이브리드 표면의 구조 및 형상은 field emission-scanning electron microscopy (FE-SEM, Hitachi S-4800)으로 관찰하였다. 또한 투명 면상 발열체의 성능은 0.5 ~ 3 V/cm의 다양한 전압을 power supply (Keithly 2400, USA)를 통해서 시편 양 끝단에 인가한 후 시간에 따른 투명면상 발열체의 표면 온도변화를 infrared thermal imager (IR camera, Nikon)를 이용하여 관찰하였다. 하이브리드 구조를 가진 ITO박막의 두께는 40 nm로 고정 시키고 Ag박막의 두께는 10, 15, 20 nm로 변화를 주었다. 이들 박막의 면저항 값은 각각 5.3, 3.2, $2.1{\Omega}/{\Box}$였으며, 투과도는 각각 86.9, 81.7, 66.5 %였다. 이에 비해 두께 95 nm의 단일 ITO박막의 면저항 값은 $59.5{\Omega}/{\Box}$였으며, 투과도는 89.1 %였다. 하이브리드 구조의 전기적특성은 금속층의 두께가 증가할수록 캐리어 농도 값이 증가함에 따라 비저항 값이 감소되어 면저항 값도 감소된 것이며, 금속 삽입층의 전도특성이 비저항에 큰 영향을 주고 있음을 보여준다. 하지만 금속 층의 두께가 증가할수록 Ag층이 연속적인 막을 형성하여 반사율이 증가함에 따라 투과도가 감소하였다. 따라서 하이브리드 구조를 가진 투명 면상 발열체에 금속 삽입층의 두께 조절은 매우 중요한 인자임을 확인 할 수 있었다. 또한 발열성능을 평가 하기 위해 시편 양 끝단에 3 V전압을 인가한 결과, 금속 삽입층의 두께가 10 nm에서 5 nm씩 증가한 하이브리드 구조를 가진 투명면상 발열체의 최고 온도는 각각 98, 150, $167^{\circ}C$ 였으며, 단일 ITO의 최고 온도는 $32^{\circ}C$였다. 이 것은 동일한 두께 (95 nm)의 단일 ITO 박막과 비교하여 면저항이 낮은 하이브리드 박막의 발열량은 약 $120^{\circ}C$로 발열효율이 매우 우수한 것을 확인 할 수 있었다.

• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.742-753
• /
• 2016

This study aims to reproduce of Anuisamdong's landscape structure and improve the value of Scenic site. It was extract main spot from Geography book published by government in the 19th Century. And analyzed landscape architecture of Dongcheon. Extract main spot from Geography book published by government. Consequently, Hwarim-dong main spot 6 places, Simjin-dong main spot 9 places, and Wonhak-dong main spot 25 places were identified. Hwarim-dong's main spot was divided into 3 places of pavilion and scenery, respectively. Simjin-Dong's main spots was all that natural elements as a scenery. Wonhak-dong's main spot was the most elements of the Anuisamdong in geography book published by government. Hwarim-dong was pavilion-based scenery area complex, Simjin-dong was continues scenery spot along the valley, and Wonhak-dong was hybrid distribution that landscape structure. Each dongcheon in Anuisamdong was created a separate area through isolated geographical, visually for structure of collectively means. Also, a narrow entrance and enclosure topography are areas which arouse atmosphere of paradise. In addition, Aunuisamdong's landscape structure, which was previously divided into individual Dongcheon, was expanded into a single integrated landscape structure of Dongcheon. This is different from the general landscape development of common Dongcheon with the same starting and ending points and sightseeing routes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11B
• /
• pp.920-929
• /
• 2004

Nowadays, wireless packet data services are provided over cdma2000 1x/1xEV-DO mobile communication network and Portable Internet are being standardized for users demanding higher data rate services. Portable Internet can provide high data rate services, but its service coverage is relatively small. If Portable Internet may be integrated with cdma2000 mobile networks, users are able to choose the best service according to service areas and get seamless services while they are moving around. At the same time, it is cost-effective for operators to construct and maintain the integrated network. For the purpose of effectively integrating Portable Internet into cdma2000 networks, we propose an integration scheme including network architecture, protocol architecture, functions in network elements, interfaces between them, and call-flow procedures. The integration scheme proposed in this paper adopts a tightly-coupled architecture for unified authentication/accounting and seamless services. In addition, the scheme can be implemented without modifying the existing cdma2000 mobile communication networks. It is also simple to develop the dual-mode mobile station. Through the simulation results based on the performance model for handoffs between cdma2000 and Portable Internet, it has teen validated that the proposed scheme diminishes packet losses compared with the loosely-coupled architecture.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.3
• /
• pp.187-187
• /
• 2004

In this paper, we present an efficient architecture of a versatile Reed-Solomon (RS) decoder which can be programmed to decode RS codes continuously with my message length k as well as any block length n. This unique feature eliminates the need of inserting zeros for decoding shortened RS codes. Also, the values of the parameters n and k, hence the error-correcting capability t can be altered at every codeword block. The decoder permits 3-step pipelined processing based on the modified Euclid's algorithm (MEA). Since each step can be driven by a separate clock, the decoder can operate just as 2-step pipeline processing by employing the faster clock in step 2 and/or step 3. Also, the decoder can be used even in the case that the input clock is different from the output clock. Each step is designed to have a structure suitable for decoding RS codes with varying block length. A new architecture for the MEA is designed for variable values of the t. The operating length of the shift registers in the MEA block is shortened by one, and it can be varied according to the different values of the t. To maintain the throughput rate with less circuitry, the MEA block uses both the recursive technique and the over-clocking technique. The decoder can decodes codeword received not only in a burst mode, but also in a continuous mode. It can be used in a wide range of applications because of its versatility. The adaptive RS decoder over GF($2^8$) having the error-correcting capability of upto 10 has been designed in VHDL, and successfully synthesized in an FPGA chip.