A melted bead microstructure can be divided into a deformed and undeformed layer. Measurement errors occur in the presence of a deformed layer, which should be removed through grinding/polishing whilst preserving the original structure. This paper proposes a grinding/polishing process to analyze the microstructure of copper melted beads. For the removal of the deformed layer, the correlation between the abrasive type/size, the polishing time and polishing rate was analyzed and the thickness of the deformed layer was less than $1{\mu}m$. The results suggest a new grinding/polishing procedure: silicon carbide abrasive $15{\mu}m$ (SiC P1200) 2 min, and $10{\mu}m$ (SiC P2400) 1 min; and diamond abrasive $6{\mu}m$ 8 min, $3{\mu}m$ 6 min, $1{\mu}m$ 10 min, and $0.25{\mu}m$ 8 min. In addition, a method of increasing the sharpness of the microstructure by chemical polishing with $0.04{\mu}m$ colloidal silica for 3 min at the final stage is also proposed. The overall grinding/polishing time is 38 min, which is shorter than that of the conventional procedure.
Pop-in deformation phenomena in aluminum was studied. Whether a pop-in occurs or not depended on the surface polishing method. Pop-in did not occur in aluminum which was polished mechanically, while it occurred in aluminum which was polished electrically. When pop-in occurred, elastic deformation preceded. Pop-in mechanism based on dislocation activity was suggested. Suggested mechanism was consistent with the result of microstructure analysis by Focused Ion Beam polisher (FIB) and Transmission Electron Microscopy (TEM).
Proceedings of the Materials Research Society of Korea Conference
/
2012.05a
/
pp.106.1-106.1
/
2012
EBSD(Electron BackScattered Diffraction)분석은 주사전자현미경에서 관찰되는 비교적 넓은 영역의 결정 방위를 측정하여 집합조직을 해석하는 동시에 결정 방위의 변화를 기준으로 결정립계를 구분 지어 미세조직의 정량 분석도 가능하기 때문에 많은 연구자들이 사용하고 있다. 그러나 EBSD의 Kikuchi 패턴은 시편 표면으로부터 30~50nm 깊이 범위의 표면층으로부터 방출되기 때문에 EBSD 분석 결과는 시편의 표면 처리 상태에 크게 영향을 받아 적절한 시편준비법이 요구된다. 시편 준비 과정 중에 생기는 변형층, 산화층이나 오염층이 10nm 이내로 제어되지 못하면 명확한 패턴을 얻지 못하여 분석이 어려운 경우가 많으므로, 시료의 절단과 연마 과정 중에 변형층을 되도록 적게 만들고 표면의 산화나 오염을 최대한 방지해야 한다. 또한 EBSD 분석 특성상 시편을 70도로 기울이기 때문에 시편의 요철이 심하면 볼록한 영역에 의해 오목한 영역의 패턴이 가려져 결정방위 정보를 얻기 힘들다. 이런 이유로 시편을 최대한 평평하게 하고 요철이 생기지 않게 시편 준비를 하는 것이 관건이다. 금속재료의 EBSD 시편준비법으로는 일반적으로 기계적 연마법과 전해연마법이 주로 쓰인다. 경한 석출물이나 개재물이 연한 기지에 분산되어 있는 시편이나 이종 소재 접합재의 경우는 전해연마법을 사용하면 특정 상(혹은 합금)이 먼저 연마되어 큰 단차가 생기거나 석출물에 의해 요철이 심해져서 정량적인 EBSD 분석이 어렵게 된다. 이 연구에서는 시편 준비가 어렵다고 알려진 다상 금속재료에서의 EBSD 분석 사례를 소개한다. Ti-6Al-4Fe-0.25Si 시효처리합금, 알루미늄 기지 복합재료, 마찰교반용접한 알루미늄-타이타늄합금의 EBSD 시편준비법과 그 분석 결과를 고찰한다.
Proceedings of the Korean Institute of Industrial Safety Conference
/
2003.10a
/
pp.270-279
/
2003
현대산업의 고도화 추세에 따라 반도체를 비롯한 의료 및 식품위생기기 산업분야에 사용되는 부품의 고정도가 요구되면서 기존에 공구와 가공물이 직접 접촉하면서 절삭하는 가공방법으로는 절삭력에 의한 변형과 마찰열 등으로 인하여 고정도 가공의 실현에 어려움이 생기게 되었다. 그리고 의료 및 식품기기에 사용될 부품의 내면을 기존의 기계적 가공방법으로 가공할 경우 공작물 표면에 미소한 가공흔적이 남게되어 표면의 요철부분에 칩(chip)등의 불순물이 잔재할 우려가 있으며, 또한 요철 부분에 미생물이 번식할 경우 청정도가 떨어져 산업위생상의 문제점이 발생하게된다.(중략)
Proceedings of the Materials Research Society of Korea Conference
/
2003.03a
/
pp.244-244
/
2003
나노인덴테이션은 시편에 압자를 침투시켜 재료의 기계적 특성을 파악할 수 있는 경도시험법이다. 압입범위를 나노미터범위로 조절할 수 있어 기존에 접근할 수 없었던 극 미소부분에로 응용이 넓어지고 있다. 경도시험시 재료의 탄성 및 소성 작용에 의해 재료는 변형되고, 표면변화 관찰을 통해 표면아래 부분에서 이루어지고 있는 거동을 예측할 수 있다. 이러한 관점에서 나노인덴테이션 시험시에도 발생하는 파일업과 싱크인 현상에서 재료가 나노미터 범위에서 어떠한 양상으로 변형을 하는지를 고찰하는 것은 의미가 있을 것이다. 본 연구에서 파일업과 싱크인의 양상을 파악하고 그 양을 정량화하기 위하여 가공경화양에 따른 표면변화와 압입하중 변화에 따른 표면변화를 관찰하였다. 어닐링한 봉상 알루미늄을 압축변형을 0%, 5%, 20%, 40%, 50% 로 변형시켜 가공경화를 일으켰고, 표면은 전해연마하여 나노압입시험이 가능하도록 하였다. 각각의 시편을 나노인덴테이션 압입하중을 변화시켜 재료에서 하중 변화에 따라 나타나는 표면변화를 관찰하였고, 위의 각 조건에서 파일업양을 정량화 하였다. 연구결과에 대해 ANSYS 유한요소분석 프로그램을 사용하여 재료의 변형양상을 시뮬레이션 하였고, 실제 실험데이터와 비교 분석하였다.
Transactions of the Korean Society of Mechanical Engineers A
/
v.37
no.3
/
pp.313-318
/
2013
Magnetic abrasive polishing is an advanced deburring process for nonmagnetic materials and micropattern products that have non-machinability characteristics. Despite these advantages, there are some problems with using MAP for deburring. MAP has introduced geometric errors into microgrooves because of an over-cutting force caused by uncontrolled magnetic abrasives in the MAP tool. Thus, in this study, to solve this problem, an EP (electrolyte polishing)-MAP hybrid polishing process was developed for deburring microgrooves in an STS316 material. In addition, an evaluation of EP-MAP for the deburring of microgrooves was carried out by profiling the burrs. The results of the experiment showed geometric errors after the deburring process using MAP. However, in the case of EP-MAP, no geometric error was observed after the process because of the lower material removal rate in EP-MAP.
For the Space-borne optical imaging payload system design, light weighting and moderate stiffness of mirror and/or mirror fixation device is very important aspects. The front surface of mirror is regulated by optical performance requirement, but the shape of backplate of mirror is to be optimised while satisfing the required stiffness and weight. According to the results, the best shape of backplate cell is triangular. And also related geometric dimensions and the optimised mounting point of MFD(Mirror Fixation Device) is presented. Finally, natural frequencies and shpaes of mirror structure are analysed.
Kim, Dong-Hyun;Kang, Kook-Hee;Bae, Seung-Muk;Lim, Young-Jin;Lee, Seung-Heun
Journal of the Korean Recycled Construction Resources Institute
/
v.5
no.4
/
pp.435-441
/
2017
Studies on self-healing have currently been diversified and the methods to evaluate the studies have become more diversified as well. Among them, the back-scattered electron (BSE) image acquired through the scanning electron microscope (SEM) is attempted as the means to evaluate the self-healing effect on cracks. In order evaluate by the BSE image, sophisticated pre-processing of specimen is critical and this injected inside the particle, pore and artificial crack of the hardener to stabilize the structure of the newly generated self-healing product and it enables to endure the stress on polishing without deformation. The impregnated specimen smoothen the surface to obtain the BSE image of high resolution that polishing is made for diamond suspension for wet polishing after dry polishing. As a result of evaluating the self-healing product on the impregnated and polished self-healing specimen, the generated product is formed from the surface of the artificial crack and the self-healing substances are confirmed as $Ca(OH)_2$ and C-S-H.
Pocheon, Keochang and Sangju granite samples of different granularity and mineralogical composition were thermally treated at pre-determined temperature of $600^{\circ}C$. Thermally-induced microcracks were characterized using an optical microscopy and their effects on the deformation behavior of thermally cycled samples were studied performing compressive mechanical tests. Optical observations shows that by $600^{\circ}C$ nearlly all crystal boundaries open and the new intracrystalline cracks form in the more grains. The intracrystalline cracks are most pronounced at thermally treated Pocheon and Keochang granite samples. Results from mechanical tests represents negative lateral strains, which give negative Poisson's ratios. It is the most probable that negative lateral strains are produced by residual stresses induced during cooling.
We present a three-dimensional average flow model considering elastic deformation of pad asperities for chemical mechanical planarization. To consider the contact deformation of pad asperities in the calculation of the flow factor, three-dimensional contact analysis of a semi-infinite solid based on the use of influence functions is conducted from computer generated three dimensional roughness data. The average Reynolds equation and the boundary condition of both force and momentum balance are used to investigate the effect of pad roughness and external pressure conditions on film thickness and wafer position angle.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.