• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.7-14
• /
• 1986

To predict the fuel clad temperature during the reflooding phase of a LOCA, one may need a knowledge of reflood heat tranfer mechanism in a rod bundle. For this purpose reflooding experiments have been carried out with an electrically heated 3*3 rod bundle. Using the method for the determination of local heat transfer coefficient from the measured wall temperature the parametric effects of coolant flow rate, initial wall temperature, coolant subcooling and heat generation rate on the propagation of rewetting front were investigated. Prediction of the wall temperature histories for these experiments was discussed using REFLUX code with modification of the rewetting temperature correlation. Through this modification, better agreement between experiment and prediction was obtained.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.1
• /
• pp.76-84
• /
• 2013

In this study, thermal weight loss, non-isothermally experiment, chemical composition analysis, calorific value, activation energy (E) were investigated to analysis the kinetic study of RDF, wood pellets, waste wood, waste textile and waste vinyl. When the chemical composition of solidification fuel was compared, the moisture content of RDF was less than the wood pellet and when the kinetic study was compared, the combustion reaction rate of the waste vinyl was higher than any other solidification fuels. However when the combustion efficiency was compared by the activation energy, the RDF had the higher efficiency than other wastes. RDF can be found that the reaction takes place between $320{\sim}720^{\circ}C$ depending on the heating rate.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.12-17
• /
• 2008

The In recent years, the need for more fuel-efficient and lower-emission vehicles has driven the technical development of alternative fuels such as LPG (Liquefied Petroleum Gas) which is able to meet the limits of better emission levels without many modifications to current engine design. LPG has a high vapor pressure and lower viscosity and surface tension than diesel and gasoline fuels. These different fuel characteristics make it difficult to directly apply the conventional gasoline or diesel fuel pump. In this study, experiments are performed to get initial performance and efficiency of the fuel pump under different condition of the temperature and composition of fuel. The characteristics of vane type fuel pump were investigated to access the applicability on LPLi engine.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.04a
• /
• pp.165-174
• /
• 2000

새로운 에너지원으로 개발된 오리멀젼의 국내 활용에 관한 기술적인 특성을 파악하기 위하여 연료 특성과 연소에 대한 실험적인 연구를 수행하였다. 연료저장을 위한 최적온도는 6$0^{\circ}C$이었으며 온도가 낮으면 점화특성이 불량하고 너무 상승하는 경우에는 계면분리 현상이 보였다. 연소를 위해 필요한 연소실온도는 $600^{\circ}C$ 이상이 요구되었고 수분의 비등폭발에 의해 2차 연소가 특징적으로 관찰되었다. 오리멀젼 연소시 배기가스중 오염물질 농도는 과잉공기비에 SO$_2$ 가 1700-2200ppm , NOx 100-150ppm 으로 측정되었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.7
• /
• pp.963-972
• /
• 2003

Performance characteristics of the planar-type solid oxide fuel cell (SOFC) are investigated by the analysis of flow fields coupled with heat and mass transfer phenomena in anode and cathode channels. For these purposes, performance analysis of the SOFC is conducted based on electrochemical reaction phenomena in electrodes and electrolyte coupled with flow fields in anode and cathode channels. In the present study, the isothermal model adopted in the previous paper prepared by the same authors is extended to the non-isothermal model by solving energy equation additionally with momentum and mass transfer equations using CFD technique. It is found that the difference between isothermal and non-isothermal models come from non-uniform temperature distribution along anode and cathode electrodes by solving energy equation in non-isothermal model. Non-uniform temperature distribution in non-isothermal model contributes to the increase of average temperature of the fuel cell and influences its performance characteristics.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.421-424
• /
• 2011

Thermal Analyses are conducted to measure various factors of a liquid fuel required for numerical analysis. Thermal Analyses are divided into two different methods of TGA (Thermo Gravimetric Analysis) and DSC (Differential Scanning Calorimetry). Non-isothermal experimental results are analyzed using by TGA. The results are filtered by a Freeman Carroll method. At the same time, chemical parameters of unknown liquid fuel, activation temperature and reaction order are measured to 6128.2 K and 1.4, respectively. Furthermore, the parameters can be obtained by various mathematical methods. It is found that tha parameters depend on the processing method.

• Nuclear Engineering and Technology
• /
• v.23 no.3
• /
• pp.275-284
• /
• 1991

It is important to predict the main feature of fully developed turbulent secondary flow through infinite triangular arrays of parallel rod bundles. One-equation turbulence model which include anisotropic eddy viscosity model was applied to predict the exact velocity field. For a constant properties, Reynolds equations were solved by the finite element method. Mean axial velocity near the wall is simulated by the law of the wall. The numerical results showed good agreement with avaiable experimental data. The strength of the secondary flow increased with Reynolds number but decreased with rod spacing, P/D (pitch-to-diameter). The secondary flow affects remarkably the distribution of the axial velocity, wall shear stress and turbulent kinetic energy in the closely packed rod array bundles.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.2
• /
• pp.49-57
• /
• 2020

Due to the sewage sludge's characteristics of high water content and low calorific value, it is hard to use sewage sludge as an energy source. In this study, we investigated production of bio-solid fuel which is mixed both sewage sludge and woody biomass in order to improve the sewage sludge's characteristics and replace fossil fuels. A thermogravimetric analysis was used to investigate the co-combustion characteristics of the mixed coal and bio-solid fuel of 5%, 10%, 15%, respectively. The analysis was carried out under non-isothermal conditions by raising the internal temperature of 25℃ to 900℃ with an increment of 10℃/min. In the case of comparing single coal sample and mixture sample of coal and bio-solid fuel, the initiation combustion temperature has slightly changed. However, both the maximum combustion temperature and the termination start combustion temperature were hardly noticeable. The initiation combustion was occurred between 200~315℃ and the thermal decomposition causing a significant weight change occurred between 350~700℃. As a result of the kinetic analysis of the co-combustion, the activation energy was decreased as the mixing rate was higher. Therefore, it is able to co-combust the mixed coal and bio-solid fuel in power plants.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3473-3478
• /
• 2007

A dual side cooling annular fuel having internal and external coolant channels has many advantages basically due to low fuel temperature and high DNBR margin, which can make a significant increase of core power density possible. So recently a 12x12 square annular fuel array was proposed for the fuel assembly to be reloaded without structural interference with operating reactors of OPR-1000s. Even through the inherent potential of the annular fuel on the high power density, it may be seriously eroded in the case of a severe unbalanced mass flux split to the internal and external channels in standpoint of DNB. Mass flux split is determined pressure drop characteristics between inner and outer channels. The spacer grids binding fuel array influence greatly the pressure drop in outer channels and the mass flux split. As an important factor of DNB behavior, the enthalpy differences at both channel exits were evaluated using the mass flux splits.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.543-548
• /
• 1996

이 연구의 목적은 고리 3/4호기 및 영광 1/2호기의 음의 중성자속 변화율에 의한 원자로 트립(NFRT) 설정치를 제거하여 불의의 제어봉 낙하 사고시에 원자로 트립을 방지하는 것이다. 현재의 인허가된 안전해석 방법론에 의하면 제어봉 낙하사고시에 NFRT에 의하여 원자로가 트립되고 결국 발전소의 이용율이 감소하게 되는데 본 연구에서 적용된 새로운 방법론으로는 이 NFRT 보호신호 없이도 제어봉 낙하사고시에 발전소의 안전성을 입증할 수 있다. 안전분석은 주기별로 다른 핵설계 자료 즉, 냉각재 온도상수, 전출력에서의 제어봉가 및 제어봉 삽입한계 등을 이용하여 수행되었다. 웨스팅하우스형 연료인 OFA 및 V5H에 대하여 고리 4호기 6주기외 3개 주기에 대하여 분석되었다. 분석된 주기들에 대해서 NFRT 신호 없이도 핵비등 이탈률(DNBR) 설계기준을 모두 만족하였다. 그러므로 고리 3/4호기 및 영광 1/2호기의 NFRT 신호는 제거할수 있고 이로써 제어봉 낙하사고시의 발전소 불시정지를 방지할수 있다.