• International Journal of Highway Engineering
• /
• v.1 no.1
• /
• pp.107-119
• /
• 1999

The joints in the jointed concrete pavement provide a control against transverse or longitudinal cracking at slab, which may be caused by temperature or moisture variation during or after hydration. Without control of cracking, random cracks cause more serious distresses and result in structural or functional failure of pavement system. However, joints nay cause distresses due to its inherent weakness in structural integrity. Thus, the evaluation at joint is very important. and the joint-related distresses should be evaluated reasonably for economic rehabilitation. The purpose of this paper was to develop an evaluation system at joints of jointed concrete pavement using finite element analysis program, ILLI-SLAB, and nondestructive testing device. FWD. To develop an evaluation system for JCP, a sensitivity analysis was performed using ILLI-SLAB program with a selected variables which might affect fairly to on the performance of transverse joints. The most significant variables were selected from precise analysis. An evaluation charts were made for jointed concrete pavement by adopting the field FWD data. It was concluded that the variables which most significantly affect to pavement deflections are the modulus of subgrade reaction(K) and the modulus of dowel/concrete interaction(G), and limiting criteria on the performance of joints at JCP are 300pci. 500,000 lb/in. respectively. Using these variables and FWD test, a charts of load transfer ratio versus surface deflection at joints were made in order to evaluate the performance of JCP. Practically, Chungbu highway was evaluated by these evaluation charts and FWD field data for jointed concrete pavement. For Chungbu highway, only one joint showed smaller value than limiting criterion of the modulus of dowel/concrete interaction(G). The rest joints showed larger values than limiting criteria of the modulus of subgrade reaction(K) and the modulus of dowel/concrete interaction(G).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.4
• /
• pp.272-281
• /
• 2007

선박제조업을 비롯한 운송업 및 건축업 등의 다양한 분야에서 용접기술이 이용되어 옴에 따라 용접근로자들에 대한 산업보건학적 관심이 높아지고 있다. 노출정도가 다양하기는 하지만 용접흄은 6가 크롬을 비롯한 금속화합물과 유해가스, 화학물질 등을 복합적으로 포함하고 있는 스테인레스 스틸 용접흄에 대한 유전독성영향을 평가하기 위하여 흡입챔버를 이용, 실험동물인 영장류에 스테인레스 스틸 용접흄을 노출시키고 혈액 내 lymphocytes에 생성된 용접흄 노출농도 및 시간별 DNA 손상정도 및 그 회복효소를 측정함으로써, 유해성이 완전하게 확인되지 않은 용접흄에 노출되어 나타날 수 있는 암을 비롯한 심각한 건강영향을 예방하기 위한 각 지표들을 찾아 그 유용성을 비교하고자 하였다. 영장류를 노출시키기 위해 robotic arm을 장치한 영장류 흡입노출 시스템을 개발하였으며, 이 노출 시스템을 이용하여 수컷 영장류 6마리에 대해 용접흄 노출시험을 실시하였는데 실험군은 대조군 2, 저농도 ($31mg/m^3$) 노출군 2, 고농도 ($63mg/m^3$) 노출군 2마리로 구성하였고, 1일 2시간씩 일주일에 5일 동안 용접흄에 노출시켰다. 노출 농도는 지속적으로 모니터링 하였고, 노출과정 중에 영장류의 혈액을 채취하여 lymphocytes를 분리, 단세포 DNA 손상을 선별하기 위해 DNA 손상회복 효소인 E. coli formamidopyrimidine-DNA glycosylase (Fpg)와 endonuclease Ⅲ (Thymine Glycol-DNA glycosylase) 투여와 Comet asaay (single cell gel electrophoresis, 단세포겔전기영동기법)를 결합시켜 이용하는 Fpg/Endo III FLARE 분석법을 사용하였다. Fpg enzyme에 의한 olive tail moment값의 변화는 16주 노출군부터 노출부검(34주)군 까지 노출농도가 높아짐에 따른 olive tail moment 기하평균 값의 양 반응관계를 보기는 어렵지만, 고농도군의 경우 27주 노출군에서 가장 높은 olive tail moment 값을 보이고 이후 차츰 감소하였다. 한편 16주에서 22주까지의 노출기간에서는 대조군에 비해 노출군에서 DNA손상정도(olive tail moment값)는 모두 유의하게 높았으나, 6, 12, 18, 25, 31, 33, 35주간 노출하였을 때는 다른 결과를 보였다. 각 실험군의 Fpg enzyme에 의한 tail length값의 분포를 살펴볼 때, 저농도군 및 고농도군에서 27주간 노출하였을 때 가장 높은 tail length 값을 보이고 이후 차츰 감소하는 경향을 보였다. 또한 16, 22주간 노출하였을 때 대조군에 비해 노출군에서 tail length 값이 유의하게 높았으나, 20주간에서만 양 반응관계가 관찰되었고, 다른 주간에서는 양 반응 및 기간 반응관계를 나타내지는 않았다. Endo III enzyme에 의한 olive tail moment값의 변화는 기간별 노출군에서 대조군에 비해 높은 DNA손상정도(olive tail moment값)를 나타내는 결과들이 있었지만, 10, 12, 16, 22, 25, 31주간 노출하였을 때 등 상당수 노출기간에서 반응관계를 나타내지는 않았다. 각 실험군의 Endo III enzyme에 의한 tail length값의 분포를 살펴볼 때, 18, 20, 27, 33주간 노출하였을 때 대조군에 비해 노출군에서 tail length 값이 조금 높았지만, 양 반응 및 기간 반응관계를 보이지 않았고 수치의 크기가 불규칙하게 변화하였다. 즉, DNA에 있어 산화된 pyrimidine을 형성하여 손상된 부위의 염기를 제거함으로써 AP site (abasic site)를 만들고 이들이 Comet assay를 통해 break로 전환된 것을 포함한 DNA손상을 측정하기 위하여 endonuclease III (Endo III)를 첨가시킨 Endo III FLARE 분석법을 실시한 결과, 본 연구에서 나타난 결과는 용접흄 노출 영장류에서 Olive tail moment 및 tail length 공히 노출량 및 노출기간 반응관계를 볼 수 없었다. Endo III FLARE 분석법을 통한 산화적 DNA 손상지표는 영장류에 적용하기에는 적응반응현상으로 대조군과 유의한 차이도 관찰할 수 없었고 더욱이 역으로 대조군에서의 자연발생적 수치가 더 높아질 수 있어 용접흄 노출 영장류의 모니터링 지표로 사용하기에는 제한점이 있었다.

• Journal of The Korean Association For Science Education
• /
• v.19 no.4
• /
• pp.604-621
• /
• 1999

We analyze the admission test problems used in 1998 at the Science Education Center for Gifted Youth at Kyungpook National University (SECGY, KNU). The test consists of two parts, an evaluation of the scientific thinking skills and an evaluation of the achievement for Mathematics and Sciences, the former of which includes evaluations of scientific process skills and logical thinking skills. The problems for the test of scientific thinking skills were developed and standardized by the Korea Education Development Center, while those of the achievement for Mathematics and Sciences were made at SECGY. We calculate the indices of the difficulty and discrimination for each problem to determine whether or not the test is appropriate to apply for selecting number of gifted students among the recommended students from 389 middle schools in Taegu-city and Kyungsang-pook-do Province. We find that both indices of most problems for the test of scientific thinking skills were out range of the appropriate level and. moreover, even those problems which fall into the appropriate range showed very low efficiencies for distractors. We, thus, conclude that the problems of the test of scientific thinking skills are inappropriate to use as a test for admission to SECGY. On the other hand, the problems of the achievement test showed extreme results; the Mathematics problems appeared to be too difficult, whereas the Physics problems appeared too easy. However, overall scores showed a normal distribution, indicating that those problems played crucial role in selecting gifted students. We finally propose several suggestions in developing the test problems and in selecting students at the SECGY.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.2
• /
• pp.224-230
• /
• 2014

Marine algae have long been recognized as a health and beauty food, based on its anti-tumor, anti-inflammatory and anti-obesity activities. In this study, methanol extracts were prepared from 10 different phaeophyta, after which DPPH radical scavenging and cytoprotective activities of HT-22 cells against ${\beta}$-amyloid protein ($A{\beta}$), which has neurotoxic effects, were investigated. In DPPH experiments, Ecklonia cava and Ishige okamurai showed strong ROS scavenging activities, whereas eight other phaeophyta including Petalonia binghamiae (P. bin) showed weak ROS scavenging activities. To validate the cytoprotective effects of 10 different phaeophyta in $A{\beta}$-induced HT-22 cells, protein expression levels of APP, BACE1, iNOS, phosphorylated ERK1/2, phosphorylated p38 and phosphorylated JNK1/2 were determined along with MTT assay. In the MTT assay, P. bin showed the best effective cytoprotective activity at a concentrations of $25{\mu}g/mL$, whereas Sargassum confusum, Colpomenia sinuosa, Myelophycus simplex, and Sargassum hemiphyllum showed potential. Determination of protein expression levels related to $A{\beta}$-induced neurotoxicity in the five selected phaeophyta showed that P. bin inhibited BACE1 and iNOS expression in $A{\beta}$-induced HT-22 cells. These results indicate that the cytoprotective effects of P. bin are mediated by suppressing the pathways involving $A{\beta}$-induced ERK and p38 activation.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.24-41
• /
• 2020

The engraved line expression in metal crafts is a detailed technique of carving or decorating metal surfaces. This technique engraves a line using a tool on the surface of a metal craft. This technique was used extensively in articles made of various metal materials during the Goryeo Dynasty, and the range of patterns that could be expressed and the width of users was wide. In this paper, based on relics and literature, the concept of line representation of this engraving technique used in the metal crafts of the Goryeo Dynasty and the perceptions and terms of the Goryeo Dynasty were examined. In addition, the users engaged in this craft and the specific patterns and patterns of decoration were reviewed. Through these means, it was possible to confirm various aspects of a technique that was thought previously to involve just simple expression of lines using tools. In addition, through the literature, Geumseokmun Gate, and relics currently being transmitted, it was possible to confirm the utilization patterns of techniques used in various types of objects. Various uses have led to the combination with other metal craft techniques that were popular at the time, and while utilizing unique characteristics of the techniques, this maximized the molding of various patterns. In the meantime, it is true that the intaglio technique in metal crafts has not received much attention compared to the decoration techniques of other metal crafts, such as inlay, embossing, and openwork techniques in which decorative effects are maximized due to the recognition that the technique was used so widely in relics. However, the universality of the technique is premised on its wide use across all eras. As such, it was used in metal craft relics that reflect the various cultural characteristics of Korea and various cultural aspects that are currently passed down. On the one hand, technology has been passed down as a form of intangible heritage that embodies a longstanding craft culture which continues to the present in the fields of sculpture and intangible cultural properties. As such, the universality of Seongak contains many cultural meanings. In addition, the uniqueness of the technique is distinct, and it is deeply related to Goryeo, who was in charge of the use of technology and craftsmanship of the Joseon Dynasty and the metal craft technology that is currently handed down. I think research on future techniques should be continued in depth.

• The KIPS Transactions:PartA
• /
• v.12A no.5 s.95
• /
• pp.413-420
• /
• 2005

The Newton-Raphson iterative algorithm for finding a floating point reciprocal square mot calculates it by performing a fixed number of multiplications. In this paper, a variable latency Newton-Raphson's reciprocal square root algorithm is proposed that performs multiplications a variable number of times until the error becomes smaller than a given value. To find the rediprocal square root of a floating point number F, the algorithm repeats the following operations: '$X_{i+1}=\frac{{X_i}(3-e_r-{FX_i}^2)}{2}$, $i\in{0,1,2,{\ldots}n-1}$' with the initial value is '$X_0=\frac{1}{\sqrt{F}}{\pm}e_0$'. The bits to the right of p fractional bits in intermediate multiplication results are truncated and this truncation error is less than '$e_r=2^{-p}$'. The value of p is 28 for the single precision floating point, and 58 for the double precision floating point. Let '$X_i=\frac{1}{\sqrt{F}}{\pm}e_i$, there is '$X_{i+1}=\frac{1}{\sqrt{F}}-e_{i+1}$, where '$e_{i+1}{<}\frac{3{\sqrt{F}}{{e_i}^2}}{2}{\mp}\frac{{Fe_i}^3}{2}+2e_r$'. If '$|\frac{\sqrt{3-e_r-{FX_i}^2}}{2}-1|<2^{\frac{\sqrt{-p}{2}}}$' is true, '$e_{i+1}<8e_r$' is less than the smallest number which is representable by floating point number. So, $X_{i+1}$ is approximate to '$\frac{1}{\sqrt{F}}$. Since the number of multiplications performed by the proposed algorithm is dependent on the input values, the average number of multiplications Per an operation is derived from many reciprocal square root tables ($X_0=\frac{1}{\sqrt{F}}{\pm}e_0$) with varying sizes. The superiority of this algorithm is proved by comparing this average number with the fixed number of multiplications of the conventional algorithm. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a reciprocal square root unit. Also, it can be used to construct optimized approximate reciprocal square root tables. The results of this paper can be applied to many areas that utilize floating point numbers, such as digital signal processing, computer graphics, multimedia, scientific computing, etc.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.45-50
• /
• 2002

The 'hands-on' craftsmanship of the 20th century has came and gone. Today, we are dealing with whole new, 'cerebral approach,' to concept and design with this new approach, design and function are very much dependant upon planning, sales, promotion, and the formative technique of the design industry. The innovative process of design constantly change as it reflects the needs and wants of society. It is and industry that constantly change as it reflects the needs and wants of society. It is and industry that constantly remakes and reshapes itself to suit current trend and outlook. The current idea being that consumers are looking for quality over quantity. Due to the 20th centuries dominant philosophy of functionalism, production intended to standardize the individual's purchasing choice. Aesthetic, or philosophic qualities played a second fiddle to the functional bias of a product, With production, Marketing, and research and development are integrated into the management process. This translates as good which include efficiency, quality, durability, and credibility an trademark and style. There is a definite 'post-modernist' movement and style in 21st century. Every possibility is available as the old boundaries of the 20th century are laid aside. There is a new, transformative quality to the current paradigm of design. The old "should" and "should not" of design no longerapplies. The integrated rative of design solves the usual disparity between aesthetic qualities and production. Design and profirability need not be stranger to one another. It can differentiate the image perceived of both enterprises and consumers by making use of integrated goods services. With an integrated system. both producers and designers win. While design gets full access to design in turn. All consumers make decisions based upon the evaluation of quality, service, and image ; even though it may not be a conscious decision to do so. Consumers are fully integrated human beings ; therefore producers who apply the new, integrated paradigmatic approach to concept, design, and production will reap the harvest of making a true relationship with individual buyer.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.237-255
• /
• 2010

The Korean Pharmacist Law has limited the sales of medicine to pharmacies. This has caused difficulty in purchasing medicine late at night or on holidays, which has limited the range of customers' selections and accelerated customers' discomfort, accordingly. Also, the rapid progress of aging has quickly boosted medical expenses for seniors, and has served as a factor that aggravates the budget of national medical insurance. Meanwhile, advanced countries, including the USA and Japan, have allowed the sales of general medicine, of which the safety and efficacy have been tested, in general retail stores such as convenience stores or super markets from the perspective of supporting self-medication. In particular, Japan, which has a strong tendency of pursuing safety in the world, diversified sales channels for general medicine in order to control quickly rising medical expenses. As a result, Japan has achieved the effect of easing various regulations as follows in the economic and social fields. First, the increasing distribution channels of general medicine from pharmacies to general retail stores provoked a potential demand, which also expanded related markets. Second, the competition between sales channels resulted in the reduction of the price of medicine. Third, the growing sales channels of medicine have extended the options of consumers and, subsequently, the convenience in the use of consumers has increased. Fourth, the creation of a competitive environment owing to the diversification of sales channels has accelerated an effort to enhance corporate competitiveness. Fifth, the foundation of enhancing the financial soundness of medical expenses has been prepared through the formation of a self-medication environment. In 2000, the Korean population aged 65 or over exceeded 7%, and it is anticipated to be over 14% by 2018; thus, the increase of national medical expenses will be sped up. As a way of being prepared for the era of aging, we, just as other advanced countries, need to create a self-treatment environment by diversifying the sellers of general medicine, and, thus, reduce spending on personal medical expenses, enhance the financial soundness of national medical insurance, and, further, promote the welfare of consumers.

• Journal of Biomedical Engineering Research
• /
• v.23 no.2
• /
• pp.147-153
• /
• 2002

The purpose of this study was to evacuate the effect of different types of Poly(lactic-co-glycolic acid) (PLGA) scaffolds on the formation of human auricular and septal cartilages. All of the scaffolds were formed in a tubular shape for potential application for artificial trachea or esophagus with either 110,000 g/mol PLGA. 220,000 g/mol PLGA. or a combination of both. In order to maintain the tubular shape in vivo, two methods were used. One method was inserting polyethylene tube at the center of scaffolds made of 110,000 g/mol PLGA. The other method involved combination of the two different molecular weight PLGA's. The inner surface of tubular shaped scaffold made with 110,000 g/mol PLGA was coated with 220,000 9/mol PLGA to give more mechanical rigidity. Elastic cartilage was taken from the ear of a patient aged under 20 nears old and hyaline cartilage was taken from the nasal septum. The chondrocytes were then isolated. After second passage, the chondrocytes were seeded on the PLGA scaffolds followed by in vitro culture for one week. The cells-PLGA scaffold complex were implanted subcutaneously on the back of nude mice for 8 weeks. The tissue engineered cartilages were separated from nude mice and examined histologically after staining with the Hematoxylin Eosin. The morphology of the scaffolds were examined by scanning electron microscopy. The pores were well formed and uniformly distributed in the various PLGA scaffolds. After 8 weeks in vivo culture, cartilage was well formed with 110,000 g/mol PLGA. however lumen had collapsed. In contrast. a minimal amount of neocartilage was formed with 220,000 g/mol PLGA, while the architecture of scaffold and lumen were well preserved. Elastic cartilage formed more neocartilage than hyaline. Hyaline and elastic neocartilage were well formed on 110,000 g/mol PLGA with the polyethylene tube, exhibiting mature chondrocytes and preservation of the tubular shape. It was found that 110,000 g/mol PLGA was more appropriate for cartilage formation but higher molecular weight polymer was necessary to maintain the three dimensional shape of the scaffold.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.1
• /
• pp.91-98
• /
• 2008

Purpose: Radio-isotopes (RI) use has been steadily developing due to industrial and technical development in the modern medical society. Particularly, popularization of domestic cyclotrons dramatically enable hospitals to produce and use diagnostic radio-isotopes. Generally, only specific facilities such as hospitals, research institutes, nuclear power plants and universities can use radio-isotopes, they are also responsible for ventilation system. The strength of radioactivity in the air is strongly regulated and controlled by korea atomic energy law in Korea Institue of Nuclear Safety (KINS), so that air radioactivity exposure can lead to environmental pollution surrounding places. In this study, we'd like to find out the investigation and the present condition of the controlled ventilation system in domestic hospitals by an emission standard from KINS, and try to reach an agreement about how to use the ventilation system. Result: Definition of filters, features and structures of pre-filters, hepa-filters, charcol filters, filter exchange procedures and precautions are explained. RI deflation concentration and filter exchange cycle have been presented as a standard prescribed in the rules of KINS. The Radiation Control Management System (RCMS) introduced by Seoul National University Bundang Hospital linking to digital pressure gauge with computer controller in another medical facilities were described in details. Conclusions: The system of medical facilities using RI has been remarkably developing in 21 century. Especially, radiation safety control system has also been grown rapidly into the subdivision, specialization, advanced technology along with international technical improvement. However, As far as current RI ventilation system is concerned, it has nothing better than doing in the past. Preferentially, to reinforce this, more sophisticated system with strict periodic filter exchange and exhaust air control guidance should be introduced by applying brilliant domestic information technology for RCMS and digital gauge method. From personal point of view as a radiation safety manager, I have provide with present problems and improvements. Futhermore, more improved guidance should be conducted.