• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.1
• /
• pp.1-14
• /
• 2022

In order to conduct rapid, accurate and safe surveying at the excavation site, In this study, the possibility of underground facility survey using drones and the expected effect of 3D visualization were obtained as follows. Phantom4Pro 20MP drones have a 30m flight altitude and a redundant 85% flight plan, securing a GSD (Ground Sampling Distance) value of 0.85mm and 4points of GCP (Groud Control Point)and 2points of check point were calculated, and 7.3mm of ground control point and 11mm of check point were obtained. The importance of GCP was confirmed when measured with low-cost drones. If there is no ground reference point, the error range of X value is derived from -81.2 cm to +90.0 cm, and the error range of Y value is +6.8 cm to 155.9 cm. This study classifies point cloud data using the Pix4D program. I'm sorting underground facility data and road pavement data, and visualized 3D data of road and underground facilities of actual model through overlapping process. Overlaid point cloud data can be used to check the location and depth of the place you want through the Open Source program CloudCompare. This study will become a new paradigm of underground facility surveying.

• Design Convergence Study
• /
• v.15 no.3
• /
• pp.117-131
• /
• 2016

The introduction of comprehensive programming channels has led to a diversity in the viewers' tastes and excessive competition between TV channels. Demand for channels on well-being is also increasing, due to the well-being and green consumption trends. This study conducted a case study on domestic and international channel branding strategies as well as an analysis on Korean channels focusing on well-being and lifestyle and found that there are no TV channels which provides comprehensive well-being information on food, clothing and housing at the moment in Korea. This study further discovered that information on such topics are currently provided in a tidbit fashion via educational or entertainment programs. Therefore, this study presented strategies for a well-being lifestyle channel brand and designed the brand mark and a station ID for the channel. This study conducted a survey targeting 50 men and women over 20 who have participated in environment-related projects for an objective verification of the channel brand strategies and design. The survey showed that the respondents were generally positive towards the necessity of the channel and of the content presented by this researcher. Some of the respondents, however, pointed out that the readability of the brand mark needs to be improved. This was reflected in the improved design and a survey comparing the two designs showed positive results. The results of this study will contribute to the launch of a well-being lifestyle channel targeting green consumers in the future.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.6
• /
• pp.7-20
• /
• 2017

The advancement of cloud and big data and the considerable growth of traffic have increased the complexity and problems in the management inefficiency of existing networks. The software-defined networking (SDN) environment has been developed to solve this problem. SDN enables us to control network equipment through programming by separating the transmission and control functions of the equipment. Accordingly, several studies have been conducted to improve the performance of SDN controllers, such as the method of connecting existing legacy equipment with SDN, the packet management method for efficient data communication, and the method of distributing controller load in a centralized architecture. However, there is insufficient research on the control of SDN in terms of the quality of network-using applications. To support the establishment and change of the routing paths that meet the required network service quality, we require a mechanism to identify network requirements based on a contract for application network service quality and to collect information about the current network status and identify the violations of network service quality. This study proposes a method of identifying the quality violations of network paths through ontology to ensure the network service quality of applications and provide efficient services in an SDN environment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.274-274
• /
• 2020

환경부 홍수통제소의 경우는 전국단위의 강수량(지상, 레이더), 하천수위, 유사량 관측과 국부적으로 증발산량과 토양수분 관측이 이루어지고 있는 상황이며, 기상청 및 다른 공공기관도 각 목적에 맞게 수문기상관측이 이루어지나 유역(또는 지역) 단위의 물순환 과정(강우량, 유출량, 증발산량, 지하수함양량, 토양수분량 등 포함)을 규명하는 조사·연구는 매우 미비한 실정이다. 개별적인 물순환 성분별 수문조사에서 벗어난 전체적인 관점을 고려한 유역단위의 물순환 과정을 규명하는 것은 매우 중요하다. 즉 물순환 성분별 명확한 수문량 산정 결과는 수자원 개발과 물환경 보전에 중요한 정보를 제공할 수 있다. 따라서 물순환 성분별 명확한 분석을 위해서는 중·소규모 유역 단위를 대상으로 지속적이고 신뢰성 있는 자료의 획득과 축적이 중요하므로 중·소규모 유역 단위의 대표성 있는 시험유역의 운영은 매우 의미가 있다고 볼 수 있다. 본 논문에서는 한국건설기술연구원에서 운영하는 설마천 유역(유역면적 8.48㎢, 유로경사 2.15%, 경기도 파주시 적성면 소재)의 신뢰성 높은 2019년 관측자료를 이용하여 물순환 성분인 강우량, 하천유출량, 증발산량과 지하수 함양량의 자료를 산정하였으며, 물순환 성분별 균형을 이루는 자료를 생성하였다. 기본 관측자료인 강우량은 각 지점강우량의 관측자료의 비교·검토 등 품질관리를 통해 자료를 확정하고 유역평균강우량을 산정하였다. 하천수위는 기준수위표와의 검토를 통해 자료를 확정하였으며, 하천유출량은 유량측정성과와 단면검토를 통해 수위-유량관계곡선식을 개발하고, 확정된 수위자료를 적용하여 산정하였다. 그리고 증발산량은 유역내의 기상관측자료를 활용하여 잠재증발산량을 산정하였으며, 지하수함양량은 유역내에 관측된 지하수위자료를 이용하여 지하수 함양량을 산정하였다. 각 물순환 성분별로 산정된 자료는 과거년 자료와 비교·평가를 통해 균형성을 판단하였다. 각 성분별 최대치와 최소범위, 평균값을 고려하고, 강우일수, 강우의 강우강도와 지속기간, 기상자료(기온, 일조시간, 습도, 풍속 등)를 충분히 고려하였다. 각 물순환 성분별로 생성된 2019년의 설마천 유역의 총강우량은 1,024.1mm이며, 하천유출량은 608.6mm(총강우량 대비 59.4%), 실제증발산량은 385.1mm(37.6%), 지하수함양량은 30.4mm(3.0%)이다. 여기서, 실제증발산량과 지하수 함양량은 1개 지점에서 산정값이나, 물순환의 폐합 조건을 고려하여 산정된 결과이다. 향후 유역 전체를 대표하는 기법의 개발은 필요한 실정이다. 이와 같이 산정된 물순환 성분별 자료는 유역의 물순환 과정 규명을 위한 기초자료로 매우 유용하게 활용될 수 있으며, 유역 물관리를 위한 의사결정 과정에 중요한 역할을 할 수 있을 것으로 기대된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.273-273
• /
• 2020

환경부 홍수통제소의 경우는 전국단위의 강수량(지상, 레이더), 하천수위, 유사량 관측과 국부적으로 증발산량과 토양수분 관측이 이루어지고 있는 상황이며, 기상청 및 다른 공공기관도 각 목적에 맞게 수문기상관측이 이루어지나 유역(또는 지역) 단위의 물순환 과정(강우량, 유출량, 증발산량, 지하수함양량, 토양수분량 등 포함)을 규명하는 조사·연구는 매우 미비한 실정이다. 개별적인 물순환 성분별 수문조사에서 벗어난 전체적인 관점을 고려한 유역단위의 물순환 과정을 규명하는 것은 매우 중요하다. 즉 물순환 성분별 명확한 수문량 산정 결과는 수자원 개발과 물환경 보전에 중요한 정보를 제공할 수 있다. 따라서 물순환 성분별 명확한 분석을 위해서는 중·소규모 유역 단위를 대상으로 지속적이고 신뢰성 있는 자료의 획득과 축적이 중요하므로 중·소규모 유역단위의 대표성 있는 시험유역의 운영은 매우 의미가 있다고 볼 수 있다. 본 논문에서는 한국건설기술연구원에서 운영하는 차탄천 유역(유역면적 190.64㎢, 유로경사 0.96%, 경기도 연천군 소재)의 신뢰성 높은 2019년 관측자료를 이용하여 물순환 성분인 강우량, 하천유출량, 증발산량의 자료를 산정하였으며, 물순환 성분별 균형을 이루는 자료를 생성하였다. 기본 관측자료인 강우량은 각 지점강우량의 관측자료의 비교·검토 등 품질관리를 통해 자료를 확정하고 유역평균강우량을 산정하였다. 하천수위는 기준수위표와의 검토, 상·하류 검토를 통해 자료를 확정하였으며, 하천유출량은 유량측정성과와 단면검토를 통해 수위-유량관계곡선식을 개발하고, 확정된 수위자료를 적용하여 산정하였다. 그리고 증발산량은 유역내의 기상관측자료를 활용하여 잠재증발산량을 산정하였다. 각 물순환 성분별로 산정된 자료는 과거년 자료와 비교·평가를 통해 균형성을 판단하였다. 각 성분별 최대치와 최소범위, 평균값을 고려하고, 강우일수, 강우의 강우강도와 지속기간, 기상자료(기온, 일조시간, 습도, 풍속 등)를 충분히 고려하였다. 각 물순환 성분별로 생성된 2019년의 차탄천 유역의 총강우량은 975.9mm이며, 하천유출량은 507.9mm(총강우량 대비 52.0%), 실제증발산량은 366.4mm(37.5%), 지하수함양량은 101.6mm(10.4%)이다. 여기서, 실제증발산량은 유역내 1개 지점의 잠재증발산량을 산정하여 추정한 값이며, 지하수 함양량을 산정을 위한 지하수위 관측정이 부재한 상황이나 물순환의 폐합 조건을 고려하여 산정하였다. 이와 같이 산정된 물순환 성분별 자료는 유역의 물순환 과정 규명을 위한 기초자료로 매우 유용하게 활용될 수 있으며, 유역 물관리를 위한 의사결정 과정에 중요한 역할을 할 수 있을 것으로 기대된다.

• Smart Media Journal
• /
• v.11 no.9
• /
• pp.30-38
• /
• 2022

It is important to grasp biometric data in real time for prompt action in the event of a safety accident at a work site where the risk of safety accidents exists. Among them, blood oxygen saturation is the most important factor in maintaining human life, so real-time oxygen saturation measurement and monitoring is necessary according to the situation as a preemptive response for worker safety management. By receiving real-time bio-signals from workers wearing health and life-risk protective clothing, and sharing and analyzing the worker's risk status in an external system, it is possible to diagnose the worker's current condition and efficiently respond to emergencies that may occur to the worker. In this paper, we propose a wearable oxygen saturation measurement platform technology that can monitor the risk of harmful gases and oxygen saturation of the wearer in real time and ensure the wearer's activity and safety in order to cope with emergency situations at the scene of an accident. If we overcome the limitations identified through the results of the proposed system later and apply improved biodata such as motion correction to the platform, we expect that it will be usable not only in hazardous gas environments, but also in hospitals and homes for emergency patients.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.737-746
• /
• 2023

As the core infrastructure to lead technical innovation for the fourth industrial revolution, economic value and utilizations of radiowaves are increased rapidly. The objectives of this study are to recognize the growing trend of radio stations that transmit information using radiowaves, a limited resource of the country, and to propose developed plans for the radio stations operation system in line with the changing radio technology and use environment. To be specific, the detailed implementation procedures and methods of the system were derived in accordance with the government's plan to convert the complete inspection of radio stations into a SDoC(Self Declaration of Conformity) by the telco. SDoC is a policy that grants autonomy and responsibility for radio waves interference management to existing telecom operator recognized as having radio stations operating capabilities. It has significance in that the function of radio stations inspection, which is a representative technical regulation, is efficiently distributed to the government and the private sector. This study has significance in providing reference for expediting deregulation in the radiowaves management policy.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.30-39
• /
• 2023

Large dams, which are critical infrastructures for disaster prevention, are exposed to various risks such as aging, floods, and earthquakes. Better dam safety inspection and diagnosis using digital transformation technologies are needed. Traditional visual inspection methods by human inspectors have several limitations, including many inaccessible areas, danger of working at heights, and know-how based subjective inspections. In this study, drone photogrammetry was performed on two large dams to evaluate the applicability of digital data-based dam safety inspection and propose a data management methodology for continuous use. High-quality 3D digital models with GSD (ground sampling distance) within 2.5 cm/pixel were generated by flat double grid missions and manual photography methods, despite reservoir water surface and electromagnetic interferences, and severe altitude differences ranging from 42 m to 99.9 m of dam heights. Geometry profiles of the as-built conditions were easily extracted from the generated 3D mesh models, orthomosaic images, and digital surface models. The effectiveness of monitoring dam deformation by photogrammetry was confirmed. Cracks and deterioration of dam concrete structures, such as spillways and intake towers, were detected and visualized efficiently using the digital 3D models. This can be used for safe inspection of inaccessible areas and avoiding risky tasks at heights. Furthermore, a methodology for mapping the inspection result onto the 3D digital model and structuring a relational database for managing deterioration information history was proposed. As a result of measuring the labor and time required for safety inspection at the SYG Dam spillway, the drone photogrammetry method was found to have a 48% productivity improvement effect compared to the conventional manpower visual inspection method. The drone photogrammetry-based dam safety inspection is considered very effective in improving work productivity and data reliability.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.159-166
• /
• 2024

The purpose of this study was investigate the effect of self-efficacy, self-directedness and self-leadership on reslience in nursing students and to provide the basic data of to enhance resilience. Data were collected from 199 nursing students in B city. Data analysis was analyzed by descriptive statistics, t-test, ANOVA, Pearson's correlation coefficient, and multiple regression analysis using the SPSS 22.0 program. The degree of self-efficacy of the subjects was 3.63±0.52. Resilience of the subjects was positively correlated with self-efficacy (r=.677, p<.001), self-directedness (r=.573, p<.001), and self-leadership (r=.654, p<.001). Self-leadership of the subjects showed a positive correlation with self-efficacy (r=.517, p<.001), self-directedness (r=.665, p<.001). Self-directedness of the subjects showed a positive correlation with self-efficacy (r=.491, p<.001). The factors influencing the subject's resilience were identified as self-efficacy (β=.435, p<.001) and self-directedness (β=.133, p=.036), self-efficacy (β=.341, p<.001), and the explanatory power was 57.5%. Therefore, in order to improve nursing students' resilience, it is necessary to consider self-efficacy, self-directedness and self-leadership.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.36-44
• /
• 2024

Copper electrodeposition technology is essential for producing copper films and interconnects in the microelectronics industries including semiconductor packaging, semiconductors and secondary battery, and there are extensive efforts to control the microstructure of these films and interconnects. In this study, we investigated the influence of crystallographic orientation on the local plastic deformation of copper films for secondary batteries deformed by uniaxial tensile load. Crystallographic orientation maps of two electrodeposited copper films with different textures were measured using an electron backscatter diffraction (EBSD) system and then used as initial conditions for crystal plasticity finite element analysis to predict the local plastic deformation behavior within the films during uniaxial tension deformation. Through these processes, the changes of the local plastic deformation behavior and texture of the films were traced according to the tensile strain, and the crystal orientations leading to the inhomogeneous plastic deformation were identified.