• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.565-575
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast load is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, normal strength concrete structures require higher strength to improve their resistance against impact and blast loads. Therefore, a new material with high-energy absorption capacity and high resistance to damage is needed for blast resistance design. Recently, Ultra High Strength Concrete(UHSC) and Reactive Powder Concrete(RPC) have been actively developed to significantly improve concrete strength. UHSC and RPC, can improve concrete strength, reduce member size and weight, and improve workability. High strength concrete are used to improve earthquake resistance and increase height and bridge span. Also, UHSC and RPC, can be implemented for blast resistance design of infrastructure susceptible to terror or impact such as 9.11 terror attack. Therefore, in this study, the blast tests are performed to investigate the behavior of UHSC and RPC slabs under blast loading. Blast wave characteristics including incident and reflected pressures as well as maximum and residual displacements and strains in steel and concrete surface are measured. Also, blast damages and failure modes were recorded for each specimen. From these tests, UHSC and RPC have shown to better blast explosions resistance compare to normal strength concrete.

• Journal of dental hygiene science
• /
• v.17 no.4
• /
• pp.368-374
• /
• 2017

The purpose of this study was to evaluate community dental hygiene practice education, by verifying its effect after applying project-based learning in improving the practical and social skills of learners. A 15-week project-based community dental hygiene practice course was held for 27 senior students, who took community dental hygiene practice course in the Department of Dental Hygiene, Gangneung-Wonju National University. Twenty-seven students were composed of 4 teams. Each team selected a target group for four workplaces for adult workers to apply the oral health promotion project. The project was then planned and conducted based on a survey on the health problems confronting each group, and an evaluation was carried out after 4 weeks. From the results obtained in comparing confidence in problem solving ability, project value, teamwork competency, and community dental hygienist competence before and after course, the improvement in project value and teamwork competence scores was not statistically significant, but all four areas showed positive results. After analyzing the project actuality, learning outcomes, and project satisfaction after course results, the actuality of the project was 19.30 points, the learning achievement was 45.19 points, and the satisfaction was 19.19 points, demonstrating that the aim of achieving actual performance competence and a learning performance exceeding expectations was accomplished. After conducting an interview survey with 8 students, it was found that they had learned social skills involving problem-solving abilities and confidence, and teamwork competence such as cooperation, role responsibility, creative thinking ability, and communication skills. Community dental hygienists should be able to acquire learner-level practical skills and social skills in the community dental hygiene and practical courses, according to their competencies and job needs. It is necessary to develop a project?based systematic learning module to enable the community dental hygiene practice to operate as a subject closely related to fields in other dental hygiene departments.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.9
• /
• pp.1127-1132
• /
• 2006

In our previous study, a novel herb mixture (HIM-I) of Angelica gigas radix, Cnidium officinale rhizoma, and Paeonia japonica radix was developed to protect the intestinal and immune systems and promote its recovery against radiation damage. A new herbal composition (HemoHIM) with the high immune modulating activity was developed from HIM-I. HIM-I was fractionated into ethanol fraction (HIM-I-E) and polysaccharide fraction (HIM-I-P). And HemoHIM was prepared by adding HIM-I-P to HIM-I. HemoHIM showed more effective than HIM-I in immune modulation as well as radioprotection. The present study is designed to investigate the protective effects of HIM-I, HIM-I-P, and HemoHIM on hydrogen peroxide $(H_2O_2)$ induced apoptosis of human promyelocytic leukemia (HL-60) cells. It was shown that $H_2O_2$ treatment reduced the viability of cells, and increased appearance of DNA ladders, hypodiploid (subG1) cells, and phosphatidylserine translocation level. Pretreatment of HemoHIM significantly reduced the cytotoxic effect induced by $H_2O_2$, associated with reducing the translocation of phosphatidylserine, hypodiploid cells and DNA ladders. HemoHIM appeared to be more protective than HIM-I against $H_2O_2$ induced apoptosis whereas, it exhibited similar activity to HIM-I-P. These results indicated that HemoHIM might be an useful agent for protection against oxidative stress $(H_2O_2)-induced$ apoptosis as well as immune modulation, especially since it is a relatively nontoxic natural product.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.307-312
• /
• 2010

'Cheonghaejinmi' is a new japonica rice variety developed from three-way cross between Samjiyeon/SR14694-57-4-2-1-3-2-2//Iri402 by the rice breeding team of National Institute of Crop Science, RDA. Heading date of this variety is August 18, 4 days later than that of 'Sobibyeo' in middle plain areas. It has culm length of 78 cm, 125 spikelets per panicle, 92.5% of ripened grain rate, and 23.9 g of 1000-brown rice weight. It showed 12 days of heading delay, and 63% spikelet fertility in cold-water irrigation stress. 'Cheonghaejinmi' is susceptible to blast disease, bacterial blight, virus diseases and plant hoppers. The nitrogen use efficiency of this variety is higher than that of Sobibyeo in low nitrogen application level. Milled rice of 'Cheonghaejinmi' exhibits translucent, clear non-glutinous endosperm and medium short grain. It has 5.9% protein content, 20.3% amylose content, and 0.28 palatability index of cooked rice compared to -0.11 of Hwaseongbyeo. The milled rice yield of 'Cheonghaejinmi' was about 5.31 MT/ha at low nitrogen application level of ordinary season culture. This variety had 98.8% whole grain in milled rice and 76% milling recovery of whole grain. 'Cheonghaejinmi' would be adaptable to middle plain areas and middle-western coastal areas in Korea.

• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.159-201
• /
• 2019

Along with Annex 14 Volume I establishment in 1951 and the set-up of restriction surface around the runway, aeronautical technique and navigation performance achieved dazzling growth, and the safety and precision of navigation greatly improved. However, restrictions on surrounding obstacles are still valid for safe operation of an aircraft. Standards and criteria for securing safety of aircraft operating around and on airport is stated in Annex 11 Air Traffic Services and Annex 14 Aerodrome etc. In particular, Annex 14 Volume I presents the criteria for limiting obstacles around an airport, such as natural obstacles such as trees, mountains and hills to prevent collisions between aircraft and ground obstacles, and artificial obstacles such as buildings and structures. On the other hand, Annex 14 Volume I, in the application of the obstacles limitation surfaces, apply the exception criteria, as it may not be possible to remove obstacles that violate the criteria if the aeronautical study determines that they do not impair the safety and regularity of aircraft operation. Aeronautical study has been applied and implemented in various countries including United States, Canada and Europe etc. accordingly, Korea established and amended some provisions of the Enforcement rules of the Aviation Act and established the Aeronautical study guidelines to approve exceptions. However, because ICAO does not provide specific guidelines on procedures and methods of Aeronautical study, countries conducting aeronautical study have established and applied their own procedures and methods. Reflecting this realistic situation, at the 12th World Navigation Conference and at the 38th General Assembly, the contracting States demanded a reexamination of the criteria for current obstacle limitation surfaces and methods of aeronautical study, and the ICAO dedicated a team of experts to prepare new standard. This study, in line with the movement of international change in obstacle limitation surface and aeronautical study, aims to compare and analyze current domestic and external standards on obstacle limitation and height limits, while looking at methods, procedure and systems for aeronautical study. In addition, expecting that aeronautical study will be used realistically and universally in assessing the impact of obstacles, we would recommend the institutional improvement of the aeronautical study along with the development of quantitative analysis methods using the navigation data in the current aeronautical study.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.327-337
• /
• 2022

Ecological restoration is considered a good means to prevent biodiversity loss in terms of the ecosystem's health and sustainability. However, there are difficulties in putting it into practice as there is no comprehensive and objective standard for the selection of plant species, such as environmental, ecological factors, and restoration goal setting. Therefore, this study developed an evaluation index necessary for selecting plant species for restoration using the Delphi method that synthesizes the opinions of the expert group. A survey with 38 questionnaires was conducted twice for experts in ecological restoration, etc., and the importance and priority of evaluation indicators were analyzed by dividing the restoration targets into inland and island regions. The result of the importance analysis showed that "native plants" had the highest average of 4.9 among the evaluation indices in both inland and island regions, followed by "seed security", "propagation", and "root growth rate". In the inland region, the index priority was analyzed in the order of "native plants", "appearance frequency", "root growth rate", "distribution range", and "seed security" in the island region, it was analyzed in the order of "native plants", "root growth rate", "appearance frequency", "distribution range", and "tolerance", showing slight differences between the two indicators. As a result of the importance and priority indicator analysis, we set the mean importance and priority of 4.1 and 2.9, respectively, in the inland region and 4.2 and 2.9, respectively, in the island region. As for the criteria of selecting plant species for ecological restoration, the "native plants" had the highest importance and priority. "Seed securing", 'viability", "topography", "proliferation", "tolerance", "soil conditions", "growth characteristics", "early succession", "distribution range", "appearance frequency", and "germination rate" were classified into subgroups of low importance and priority. The lowest indicators were "final stage of succession", "transition period", 'transition stage", "root", "reproduction", "soil", "appearance", "technology", "landscape", "climate", and "germination rate". We expected that the findings through objective verification in this study would be used as evaluation indicators for selecting native plant species for ecological restoration.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_2
• /
• pp.811-825
• /
• 2023

In accordance with the government's stance of actively promoting intelligent administrative service policies through data utilization, in the disaster and safety management field, it also is proceeding with disaster and safety management policies utilizing data and constructing systems for responding efficiently to new and complex disasters and establishing scientific and systematic safety policies. However, it is difficult to quickly and accurately grasp the on-site situation in the event of a disaster, and there are still limitations in providing information necessary for situation judgment and response only by displaying vast data. This paper focuses on deriving specific needs to make disaster situation management work more intelligent and efficient by utilizing intelligent information technology. Through individual interviews with workers at the Central Disaster and Safety Status Control Center, we investigated the scope of disaster situation management work and the main functions and usability of the geographic information system (GIS)-based integrated situation management system by practitioners in this process. In addition, the data built in the system was reclassified according to purpose and characteristics to check the status of data in the GIS-based integrated situation management system. To derive needed to make disaster situation management more intelligent and efficient by utilizing intelligent information technology, 3 strategies were established to quickly and accurately identify on-site situations, make data-based situation judgments, and support efficient situation management tasks, and implementation tasks were defined and task priorities were determined based on the importance of implementation tasks through analytic hierarchy process (AHP) analysis. As a result, 24 implementation tasks were derived, and to make situation management efficient, it is analyzed that the use of intelligent information technology is necessary for collecting, analyzing, and managing video and sensor data and tasks that can take a lot of time of be prone to errors when performed by humans, that is, collecting situation-related data and reporting tasks. We have a conclusion that among situation management intelligence strategies, we can perform to develop technologies for strategies being high important score, that is, quickly and accurately identifying on-site situations and efficient situation management work support.

• Journal of Wetlands Research
• /
• v.26 no.1
• /
• pp.21-31
• /
• 2024

Macromia daimoji Okumura, 1949 was designated as an endangered species and also categorized as Class II Endangered wildlife on the International Union for Conservation of Nature (IUCN) Red List in Korea. The spatial distribution of this species ranged within a region delimited by northern latitude from Sacheon-si(35.1°) to Yeoncheon-gun(38.0°) and eastern longitude from Yeoncheon-gun(126.8°) to Yangsan-si(128.9°). They generally prefer microhabitats such as slowly flowing littoral zones of streams, alluvial stream islands and temporarily formed puddles in the sand-based lowland streams. The objectives of this study were to analyze the similarity of benthic macroinvertebrate communities in M. daimoji habitats, to predict the current potential distribution patterns as well as the changes of distribution ranges under global climate change circumstances. Data was collected both from the Global Biodiversity Information Facility (GBIF) and by field surveys from April 2009 to September 2022. We adopted MaxEnt model to predict the current and future potential distribution for M. daimoji using downloaded 19 variables from the WorldClim database. The differences of benthic macroinvertebrate assemblages in the mainstream of Nakdonggang were smaller than those in its tributaries and the other streams, based on the surrounding environments and stream sizes. MaxEnt model presented that potential distribution displayed high inhabiting probability in Nakdonggang and its tributaries. Applying to the future scenarios by Intergovernmental Panel on Climate Change (IPCC), SSP1 scenario was predicted to expand in a wide area and SSP5 scenario in a narrow area, comparing with current potential distribution. M. daimoji is not only directly threatened by physical disturbances (e.g. river development activities) but also vulnerable to rapidly changing climate circumstances. Therefore, it is necessary to monitor the habitat environments and establish conservation strategies for preserving population of M. daimoji.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.2
• /
• pp.118-126
• /
• 2024

This study was conducted in Cheonan, the middle region of South Korea, to evaluate the forage characteristics of six medium maturing Italian ryegrass varieties: 'Kowinmaster', 'IR 601', 'IR 602', 'IR 603', 'IR 604' and 'IR 605'. In growth characteristics, 'Kowinmaster' exhibited the earliest heading date on April 30, while 'IR 601' exhibited the latest on May 17. 'IR 601' exhibited the highest lodging resistance, and all varieties demonstrated excellent disease resistance, waterlogging tolerance, and cold tolerance. 'IR 603', 'IR 604', and 'IR 605' demonstrated above-average plant length, with 'IR 604' reaching the longest at 114.8 cm. In productivity, 'IR 602' and 'IR 605' produced the highest total dry matter yield, each exceeding 12,800 kg/ha. Regarding feed values, 'Kowinmaster' recorded the highest RFV and TDN at 119.18 and 66.07%, respectively, with 'IR 605' exhibiting the second highest. 'IR 604' and 'IR 601' demonstrated crude protein concentrations over 9%, with 'IR 604' exhibiting the highest at 9.74%. Analysis of monosaccharide content in Italian ryegrass revealed that 'IR 605' exhibited the highest glucose and fructose content at 23.35 g/kg and 50.70 g/kg, respectively. In summary, 'IR 602' exhibited the highest productivity, 'Kowinmaster' recorded the highest feed value, and 'IR 605' exhibited the highest glucose and fructose content. Therefore, 'IR 605' is considered the most outstanding variety due to its superior productivity, second highest feed value, and significant monosaccharide content.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.189-196
• /
• 2003

In this study, the vertical opening of the non-float midwater pair trawl net was maintained by controlling the length of upper warp. This was because the head rope was able to be kept linearly and the working depth was not nearly as changed with the variation of flow speed as former experiments in this series of studies have demonstrated. We confirmed that the opening efficiency of the non-float midwater pair trawl net was able to be developed according to the increase in front weight and wing-end weight. In this study, we described the opening efficiency of the non-float midwater pair trawl net according to the variation of front weight and wing-end weight obtained by model experiment in circulation water channel. We compared the opening efficiency of the proto type with that of the non-float type. The results obtained can be summarized as follows：1. The hydrodynamic resistance was almost increased linearly in proportion to the flow speed and was increased in accordance with the increase in front weight and wing-end weight. The increasing rate of hydrodynamic resistance was displayed as an increasing tendency in accordance with the increase in flow speed. 2. The net height of the non-float type was almost decreased linearly in accordance with the increase in flow speed. As the reduced rate of the net height of the non-float type was smaller than that of the net height of the proto type against increase of flow speed, the net height of the non-float type was bigger than that of the proto type over 4.0 knot. The net width of the non-float type was about 10 m bigger than that of the proto type and the change rate of net width varied by no more than 2 m according to the variation of the front weight and wing-end weight. 3. The mouth area of the non-float type was maximized at 1.75 ton of the front weight and 1.11 ton of the wing-end weight, and was smaller than that of the proto type at 2.0∼3.0 knot, but was bigger than that of the proto type at 4.0∼5.0 knot. 4. The filtering volume was maximized at 3.0 knot in the proto type and at 4.0 knot in the non-float type. The optimal front weight was 1.40 ton.