• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.78-79
• /
• 2013

본 논문에서는 태양광 및 리튬 이온 배터리를 에너지원으로 하는 계통 연계 시스템을 효과적으로 구성하기 위해 스위치 손실을 그 기준으로 삼았다. 따라서, 두 가지 종류의 회로구성에 대해 손실 예측 비교를 사용하였다. 전력 반도체의 스위칭 손실 및 도통시 전류, 전압 관계를 모델링 하였고 시물레이션을 이용해 손실 예측을 하였다.

• Journal of the KSME
• /
• v.26 no.2
• /
• pp.96-101
• /
• 1986

유한요소해석과 관련하여 그 분야와 과정을 소개하고 각각에 대하여 현재 연구의 중점방향과 예상되는 장래 집중연구 과제등을 기술하였다. 특히 공통적 기하학적 자료베이스에서부터 해 법자체와 나아가서 이들 결과의 설계응용의 자동화 또는 전문가 시스템화의 종합적인 방향이 장래 전문적인 제품설계의 방향으로 될 것을 주장하였다. 구분적인 연구는 사용자 편의의전. 후처리 프로그램, 대변형 비선형문제, 비선형 재료문제, 비선형 동적문제, 유한요소 모델링 기법, 설계와의 연계등에서 큰 진전이 있을 것으로 보고 이를 중심으로 기술하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.537-538
• /
• 2007

풍력발전의 출력은 설비의 특성상 출력량 제어가 동기기처럼 자유롭지 못하기 때문에 계통연계 운전시 많은 문제점들이 야기된다. 특히 풍력발전기가 계통에 미치는 주파수 안정도는 풍력발전이 차지하는 비중이 높아짐에 따라 점차 중요시되고 있다. 따라서 상세한 계통해석을 위해 전체 계통에 대한 시뮬레이션 기법이 필요하게 되었다. 본 논문에서는 계통과 풍력발전기의 시뮬레이션 기법을 제안하고 그 효용성을 사례 연구를 통하여 검증하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.195-200
• /
• 2020

With the growing interest in fossil fuel depletion and environmental pollution, railroad cars operating in Korea are in progress as the conversion from diesel to electric vehicles expands. The photovoltaic system, which is applied as an example of the conversion of electric vehicles, is infinite and pollution-free, and can produce energy without generating hazards such as air pollution, noise, heat, and vibration, and maintain fuel transportation and power generation facilities. There is an advantage that is rarely needed. However, the amount of electricity produced depends on the amount of solar radiation by region, and the energy density is low due to the power generation of about 25㎡/ kWp, so a large installation area is required and the installation place has limited problems. In view of these problems, many studies have been applied to fuel cells in the railway field. In particular, the plan to link the fuel cell power generation system railroad power supply system must be linked to the power supply system that supplies power to the railroad, unlike solar and wind power. Therefore, it has a close relationship with railroad cars and the linkage method can vary greatly depending on the system topology. Therefore, in this paper, we study the validity through simulation modeling related to linkage analysis according to system topology.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.407-419
• /
• 2012

It is difficult to obtain the accurate and homogeneous height information over the whole Korea due to the effect of different vertical datums have been divided into land and sea part. In this study, we tried to unify the different vertical datums using the precise spirit leveling between TBM (tidal bench mark) and BM (bench mark) in order to solve the problems caused by different vertical datums. For this, the vertical datum offsets at observed points which were calculate from leveling results and then transformation model of vertical datum will be modelled using calculated offsets along the coastal line. For suggesting the precise modelling method to vertical datum transformation, we analyzed results from various interpolation methods such as Spline and LSC method. As the results from analysis, the LSC method combined with 4-parameters trend model is more suitable for modelling the offsets between vertical datums. The final transformation model of vertical datum using the combination of LSC and 4-parameter model which provides the transformation accuracies of ${\pm}10.4cm{\sim}14.8cm$ level. And, the software for vertical datum transformation that was also developed using the final model in order to convert the height information included in various spatial data effectively. Therefore, the transformation model between vertical datums of land and sea part, which is developed in this study, is expected to minimize the confusion caused by mismatch of height information in the use of spatial data, and it also can be minimize economic and time losses in various application fields such as coastal development project, coastal disaster prevention, etc.

• Journal of Intelligence and Information Systems
• /
• v.21 no.4
• /
• pp.79-92
• /
• 2015

Knowledge map is widely used to represent knowledge in many domains. This paper presents a method of integrating the national R&D data and assists of users to navigate the integrated data via using a knowledge map service. The knowledge map service is built by using a lightweight ontology and a topic modeling method. The national R&D data is integrated with the research project as its center, i.e., the other R&D data such as research papers, patents, and reports are connected with the research project as its outputs. The lightweight ontology is used to represent the simple relationships between the integrated data such as project-outputs relationships, document-author relationships, and document-topic relationships. Knowledge map enables us to infer further relationships such as co-author and co-topic relationships. To extract the relationships between the integrated data, a Relational Data-to-Triples transformer is implemented. Also, a topic modeling approach is introduced to extract the document-topic relationships. A triple store is used to manage and process the ontology data while preserving the network characteristics of knowledge map service. Knowledge map can be divided into two types: one is a knowledge map used in the area of knowledge management to store, manage and process the organizations' data as knowledge, the other is a knowledge map for analyzing and representing knowledge extracted from the science & technology documents. This research focuses on the latter one. In this research, a knowledge map service is introduced for integrating the national R&D data obtained from National Digital Science Library (NDSL) and National Science & Technology Information Service (NTIS), which are two major repository and service of national R&D data servicing in Korea. A lightweight ontology is used to design and build a knowledge map. Using the lightweight ontology enables us to represent and process knowledge as a simple network and it fits in with the knowledge navigation and visualization characteristics of the knowledge map. The lightweight ontology is used to represent the entities and their relationships in the knowledge maps, and an ontology repository is created to store and process the ontology. In the ontologies, researchers are implicitly connected by the national R&D data as the author relationships and the performer relationships. A knowledge map for displaying researchers' network is created, and the researchers' network is created by the co-authoring relationships of the national R&D documents and the co-participation relationships of the national R&D projects. To sum up, a knowledge map-service system based on topic modeling and ontology is introduced for processing knowledge about the national R&D data such as research projects, papers, patent, project reports, and Global Trends Briefing (GTB) data. The system has goals 1) to integrate the national R&D data obtained from NDSL and NTIS, 2) to provide a semantic & topic based information search on the integrated data, and 3) to provide a knowledge map services based on the semantic analysis and knowledge processing. The S&T information such as research papers, research reports, patents and GTB are daily updated from NDSL, and the R&D projects information including their participants and output information are updated from the NTIS. The S&T information and the national R&D information are obtained and integrated to the integrated database. Knowledge base is constructed by transforming the relational data into triples referencing R&D ontology. In addition, a topic modeling method is employed to extract the relationships between the S&T documents and topic keyword/s representing the documents. The topic modeling approach enables us to extract the relationships and topic keyword/s based on the semantics, not based on the simple keyword/s. Lastly, we show an experiment on the construction of the integrated knowledge base using the lightweight ontology and topic modeling, and the knowledge map services created based on the knowledge base are also introduced.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.149-157
• /
• 2009

Tracking technologies which provide real-time and customized information through various information collecting and processing for pedestrians who use traffic connective and transferring center have been being examined. However some problems are caused due to the wide-range positioning error for some services as device installation and service place. It is also difficult to be applied to traffic linkage and transfer services because many situations can be barren. In the testbed, Gwangmyoung Station, we got some results in bad conditions such as a lot of steel construction and another communication device. Practically, conditions of the place which will be built can be worse than Gwangmyoung station. Therefore, we researched suitable Location correction algorithm as a method for accuracy to traffic connective and transferring system. And its algorithm is designed through grid coordinates, map-matching, modeling coordinates and Kalman filtering and is being implemented continuously. Also preparing for optimization of various transferring center model, we designed for simulator type algorithm what is available for deciding algorithm factor.

• Journal of the Korea Convergence Society
• /
• v.2 no.2
• /
• pp.35-45
• /
• 2011

Recently, with the increasement of the interest about global warming, pollutions, and so on, a number of distributed generations(DGs) such as photovoltaic(PV) and wind power(WP), are interconnected with distribution systems. However, installing of DGs makes power flow changes such as directions, one-direction to bi-direction, and increasing/decreasing of fault current. Therefore, it may cause the critical problems. This paper proposes an evaluation algorithm for bi-directional protection coordination and presents an evaluation system for protection coordination based on this algorithm. Additionally, the result shows that the existing method may cause critical problems, and also the effectiveness of proposed method is verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1599-1606
• /
• 2008

Recently, new dispersed generation systems such as photovoltaic, wind power, fuel cell etc. are energetically interconnected and operated in the distribution systems, as one of the national projects for alternative energy with the provision against oil crisis. The technical guidelines on the interconnection of dispersed generation systems have been established and conducted positively. However, protection devices (Re-closer) in primary feeder of distribution system interconnected with photovoltaic generation may cause problems with mis-operation, and then many customers could have problems like an interruption. So, this paper presents the optimal method to minimize the impact of interruption, using both the symmetric method and MATLAB/SIMULINK. And, also this paper shows the effectiveness of proposed method by simulating at the real distribution systems.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.1-15
• /
• 2020

In this paper, we propose a novel method for converting the existing 2D processes in the design and construction phase of civil engineering, to the future BIM-based processes. First, we compare and analyze the actual application processes of the outputs of the existing 2D method and the outputs of the 3D BIM method, for the whole process of BIM design of earthworks and road structures and integrated utilization of quantity, process(4D) and construction cost(5D), in view of life-cycle. The proposed method acquire the outputs of the design phase integrating IFC international common standard file information and CBS/OBS/WBS standard classification scheme information, and acquire the outputs of the construction stage by using an integrated utilization module for quantity, process(4D) and construction cost(5D). Ultimately, we intend to commercialize the step by step technologies for BIM design and construction in civil engineering by using the proposed method.