• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.265-274
• /
• 2016

In this study, the system was composed of the booster chopper and the power converter, which is a pulse width modulation (PWM) voltage inverter using a hybrid power generation system solar cell energy and wind force, Furthermore, in order to compensate the PWM voltage type inverter was linked with the general commercial power source, and through a normal operation of energy storage system (ESS), the system operated the LED Taxi Light by Wavelength according to Meteorological Changes at the airport in an efficient manner. The performance of the system was compared with the solar cell characteristics specification. In addition, for phase synchronization with the PWM voltage type inverter, the grid voltage was detected so as to operate the grid voltage and inverter output in the same phase and to connect the surplus electric power with the system. Finally, by developing a control circuit at the same time from which an excellent dynamic characteristics can be obtained through applying to the airport runway taxi light, it was concluded that a variety of taxi light can be pursued.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.142-149
• /
• 2004

This paper presents a neural network controller of a grid-connected wind energy conversion system for extracting maximum power from wind and a power controller to transfer the maximum power extracted into a utility grid. It discusses the modeling and simulation of the wind energy conversion system with the controllers, which consists of an induction generator, a transformer, a link of a rectifier, and an inverter. The paper describes tile drive train model, induction generator model and grid-interface model for dynamics analysis. Maximum power extraction is achieved by controlling the pitch angle of the rotor blades by a neural network controller. Pitch control method is mechanically complicated, but the control performance is better than that of the stall regulation. The simulation results performed on MATLAB show the variation of the generator torque, the generator rotor speed, the pitch angle, and real/reactive power injected into the grid, etc. Based on the simulation results, the effectiveness of the proposed controllers is verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.632-639
• /
• 2018

Recently, a policy has been enforced to supply Plug-in Electric Vehicles (PEVs) but this may require reinforcement of the power system depending on its clustering because PEVs are charged directly from power systems. On the other hand, as the reinforcement of power system is limited by time and budget, it is important to supply the charging demand of PEVs efficiently using the existing power systems to increase the diffusion of PEVs. This paper establishes a charging schedule for Plug-in Electric Vehicles (PEVs) considering the power system constraints. For this, the required amount and time of the charging demand for an individual PEV was modeled to integrate into power systems based on the driving pattern and charging tariff of PEV. Furthermore, the charging schedule of PEVs was established to meet the power system constraints by calculating the operating conditions of the power systems with PEVs.

• Journal of the Korean Society for information Management
• /
• v.34 no.4
• /
• pp.201-225
• /
• 2017

In this study, based on the analysis of FRBRoo, we tried to propose suggestions to expand and improve the FRBR family conceptual model. FRBRoo is a plug-in ontology of CIDOC CRM with cooperation of museum field. As FRBR family models also revised and integrated into IFLA Library Reference Model, the additional analysis on IFLA LRM was performed. If bibliographic information is required to support the technical and user services of the library, the way to analyze the bibliographic information should be improved in order to cope with the new challenges faced by the library. To do this, time-related event concepts should be reflected in the modeling of bibliographic information. It is also necessary to expand the creation and exchange unit of bibliographic information to smaller units or larger units than legacy bibliographic records. Using FRBRoo as a linkage tool for the sharing of bibliographic information is also suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.56-62
• /
• 2017

As the need for 3D spatial information increases, many local governments and related industries are establishing map-based 3D spatial information services and offering them to users. In these services, positional accuracy is one of the most important factors determining their applicability to specific tasks. This study studied the location correction method between indoor and outdoor 3D spatial information through the construction of modeling data on a BIM/GIS platform. First, we selected the sites and processed the BIM/GIS data construction with 3 steps. When connecting the BIM model including indoor spatial data and 3D texturing model based on ortho images, mismatches occurred, so we proposed a location correction method. Using the conversion algorithm, the relative coordinate-based BIM data were converted to the absolute positions and then relocated by means of the texturing data on the BIM/GIS platform.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1344-1348
• /
• 2008

HMS(Hydrological Modelling system)는 유역의 지형자료와 강우와 같은 기상관련 시계열 자료 등 수문 유출과 관련되는 많은 매개변수를 포함하고 있으며, 모형의 구동을 위해서는 다양한 공간 비공간 자료 및 시계열 자료가 요구된다. 특히 다양한 비공간 정보의 경우 이를 모형에 적용하기 위해서는 비공간 정보에 대한 열람, 선택, 편집, 적용 시나리오의 설정, 입력변수의 적절성 평가, 모형 구동결과의 검 보정 등 복잡한 절차가 필요하다. 최근 들어 공간자료의 효율적 처리를 위해서 지리정보시스템과 수리 수문모델들 간의 연계를 통한 자료 생성과 입력 및 분석과정을 일괄적으로 처리하고자 하는 연구들이 발표되고 있다. 본 연구에서는 한국형 수자원지리정보시스템인 HyGIS와 HMS 모형의 연계 시스템인 HyGIS-HMS의 개t선과 적용성 평가를 목표로 하고 있다. 이를 위하여 HyGIS-HMS 데이터 모델을 기반으로 하는 시스템의 운영 프로세스를 재정립하였다. HyGIS에서 구축된 공간 DB를 이용하여 HMS 모형의 입력 지형인자를 계산하고 있으며, 수문시계열 자료는 HyGIS의 시계열 DB를 이용하고 있다. HMS에서는 공간 자료와 시계열 자료 외에도 다양한 비공간 자료를 이용하고 있다. 이러한 비공간 정보를 DB기반 시스템에 맞추어 효과적으로 관리 및 사용하기 위하여 HyGIS-HMS에서는 Static DB를 이용하고 있으며, Static DB에서 모형의 입력자료로 직접 이용되는 자료와 모형의 수행결과는 Dynamic DB를 이용하고 있다. 또한 개발된 시스템을 경안천 유역에 적용하여 2006년과 2007년의 유출특성을 분석하였다. 이러한 개발환경의 적용을 통해 HyGIS 데이터모델과 HyGIS-Model의 운영환경이 HyGIS-HMS개발에 효과적으로 이용될 수 있는 것으로 나타났다.

• Spatial Information Research
• /
• v.20 no.6
• /
• pp.119-127
• /
• 2012

u-City is next generation city which can innovate functions of city. It can realize increase of convenience, improvement of life quality and safety guarantee by convergence of information technologies and ubiquitous service with urban space. Market of u-City is in range of rapid growth and u-City can make enormous synergy effects by accompanying construction technologies with spatial information, sensor technologies, communications network and related equipments. In this study, we analyzed the domestic/abroad status, researches and element technologies involved in u-City. And, we suggested overseas expansion strategy of u-City such as selection and analysis of target nations, packaging method of u-City service models and application of BIM/GIS connection technologies in terms of u-City construction and operation.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.295-303
• /
• 2015

Considering to Energy Storage System (ESS) is a global trend In order to reduce global warming and carbon emissions. South Korea has announced various policies to vitalize the development and uptake of renewable energy. South Korea is planning the cumulative capacity of ESS of two million kW in 2020. According to the government support and development of technology companies, the battery of ESS prices are expected to fall gradually. In this paper, we develop a planning model that take into account the supply expansion of technology of ESS and prices. Based on planning model, we analyze the cost of ESS linked with wind power and the revenue for trading electricity and renewable energy certifications.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.5
• /
• pp.25-33
• /
• 2001

For the seismic design and analysis of LMR(liquid metal reactor) being developed in Korea, it is necessary to develop the simple seismic analysis model including the fluid-structure interaction effects. In this paper, the theoretical backgrounds for the fluid added mass of the immersed concentric cylinders are investigated and the seismic analysis code using the Runge-Kutta algorithm, which can consider the fluid added mass matrix in system matrix, are developed to perform the time history seismic analysis. Form the coupled modal analysis and the seismic analysis for the simple immersed concentric cylinders, it is verified that the fluid added mass significantly affect the vibration characteristics and the seismic responses. Therefore the fluid coupled effects should be carefully considered in seismic response analysis of the immersed concentric cylinders.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.48-52
• /
• 2005

R&D Personnel information is constructed locally based on the needs of each institute and therefore is distributed over different databases. It does not support inter operability which makes it difficult to access and update that leads to the problem of ineffective usage. In this study, we have categorized the lower level information that forms the domestic S&T Personnel and defined the relationship between each type of information to suggest a standard for the data elements that guarantee the access to specific information in order to support inter operability. We have analyzed the human resource information database of domestic and foreign research institutes for the data modeling. We have also made reference to the standard metadata and database of other types that can be linked with the human resource information in designing the data elements. ISO/IEC 11179, the international standard for the metadata registry(MDR), was adopted to apply the object, attribute and expression to be described to the name of the data element.