• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4A
• /
• pp.217-225
• /
• 2012

Structural behavior of built-up compression members with unsymmetric connectors under buckling status has been studied through these experiments. When the distance between adjacent H-300 beams of built-up compression member is 2 m in length, and the H-300 beams are lengthened up to 30 m in length with three-10 m-H-beams by bolts and double arrayed, three specimen having each connector plate, single channel, double channel are experimented for evaluating buckling loads. The buckling loads from the experiments are compared with buckling loads of structural analysis using FEM and buckling loads of Timoshenko Eq. in order to figure out how the connectors' type affects on longitudinal and lateral displacements, also strain of the built-up compression members as well. The result from the experiments show that the buckling loads 4.2% decreases in double channel connectors and 36.6% decreases in single channel connectors than plate connectors.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10a
• /
• pp.251-253
• /
• 2000

JDBC는 Java 프로그램에서 표준 SQL을 사용하여 데이터베이스에 접근하기 위한 응용 프로그램 인터페이스이다. 응용 프로그램 개발자는 JDBC API를 사용하여 다양한 종류의 DBMS에 적용 가능한 응용 프로그램을 쉽게 작성할 수 있을 뿐만 아니라 JDBC API를 사용하여 작성된 기존의 응용 프로그램들을 재사용하는 것이 가능하다. 본 논문에서는, 객체 관계형 데이터베이스 관리 시스템인 오디세우스를 위한 JDBC 드라이버를 설계하고 구현한다. 본 JDBC 드라이버는 DBMS와 직접 연결하여 통신하므로 질의 결과 처리 성능이 좋고, 모두 Java 언어로 구현되기 때문에 웹 환경에서 사용하기 적합하다는 특징을 가진다.

• Composites Research
• /
• v.12 no.2
• /
• pp.1-9
• /
• 1999

The piezoelectric material connected to external electric networks possesses frequency dependent stiffness and loss factor which are also affected by the shunting circuit. The external electric networks are generally specialized for two shunting circuits: one is the case of a resistor alone and the other is the combination of a resistor and an inductor. For resistive shunting, the material properties exhibit frequency dependency similar to viscoelastic materials, but are much stiffer and more independent of temperature. Shunting with a resistor and inductor introduces an electrical resonance, which can change the characteristics of structural resonance optimally in a manner analogous to a PMD (proof mass damper). Passive damping enhancement of composite beam using piezoelectric material connected to external electrical networks is achieved and presented in this paper.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.1
• /
• pp.61-70
• /
• 2013

A turn-buckle is capable of adjusting the tensile force by left-hand threads and right-hand threads between tension members. There are different types of turn-buckles according to tension member and connection form but the practical and existing turn-buckles are incapable of measuring the tensile force. A turn-buckle for adjusting and measuring tensile force has therefore been developed. This study shows the ultimate strength and reliability for measurement of the new turn-buckles through finite element analysis of the developed ones. From analytic results of the new turn-buckles which have the measurement limit loads of 100kN, 200kN and 300kN, the ultimate strength is approximately five times stronger than the measurement limit capacity. Additionally, a review of the new turn-buckle, which has the measurement limit load of over 300kN, shows that there is a tendency for the size of turn-buckle to become larger. So the connection devices were designed and the loading test was conducted from the concept that the parallel connection of turn-buckle with 300kN capacity can measure the tensile force of 600kN. The results of parallel loading test show the sufficient possibility. Furthermore, the mock-up test was constructed to investigate the release of initial load and corrosion when the new turn-buckle is installed at the outdoor and exposed to rain and atmosphere.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.606-614
• /
• 2006

The purpose of this study was to evaluate the polymerization contraction of composite resin(Tetric $ceram^{(R)}$, Ivoclar Vivadent Liechtenstein) according to various liners(Tetric $flow^{(R)}$, Ivoclar Vivadent, Liechtenstein/$Ionosit^{(R)}$, DMG, German/ $Vitrebond,^{TM}$ 3M-ESPE, USA). The strain gauge method was used for measurement of polymerization shrinkage strain. Specimens were divided by 8 groups according to curing units and liners. Group A, E: Tetric $ceram^{(R)}$ bulk filing, Group B, F: Tetric $flow^{(R)}$ lining, Tetric $ceram^{(R)}$ filling, Group C, G: $Ionosit^{(R)}$ lining, Tetric $ceram^{(R)}$ filling, Group D, H: $Vitrebond^{TM}$ lining, Tetric $ceram^{(R)}$ filling. Group A, B, C and D were cured using the conventional halogen light($XL3000^{TM}$ 3M ESPE, USA) for 40 seconds at $400mW/cm^2$. Group E, F G and H were cured using light emitted diode(LED) light(Elipar Freelight $2^{TM}$, 3M-ESPE, USA) for 15 seconds at 800 $mW/cm^2$. Strain gauge attached to each sample was connected to a strainmeter. Measurements were recorded at each second for the total of 750 seconds including the periods of light application. Obtained data were analyzed statistically using Repeated measures ANOVA and Tukey test. The results of this were as follows : 1. Contraction stresses in flowable resin and glass ionomer lining group were lower than that in compomer lining group(p<0.05). 2, Contraction stresses in LED curing light groups were higher than that in halogen curing light groups, but there was no significant difference (p>0.05).

• Journal of Korean Society of Steel Construction
• /
• v.28 no.3
• /
• pp.129-138
• /
• 2016

Buckling of surface plates is an important limit state in Steel-Plate Concrete (SC) walls under axial compression. The surface plates may be anchored to concrete using connectors of studs or tie-bars. In this paper, the effects of studs and tie-bars on buckling of surface plates were evaluated by conducting tests. Experiments have three types of connectors; all studs, all tie-bars, and the combination of studs and tie-bars. Also, experiments have the various ratios of stud or tie-bar spacing to surface plate thickness. The experimental investigation shows that the buckling shape and strength of the surface plate of SC wall with the combination of studs and tie-bars have good agreements with that of the surface plate of SC walls with all studs or all tie-bars.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.478-480
• /
• 1998

설계 문제의 추상화와 특정 영역의 일반적인 해결에 대한 정보 표현 및 구성요소 상호 간의 관련성을 효과적으로 나타내는 설계 패턴과 공통 도메인 응용 구축에서 자동화된 아키텍쳐를 생성하는 프레임워크의 사용은 WWW상에서 활용으로 더욱 가치를 높이고 있다. 또한 각 정보가 연관성에 따라 상호 연결되어 있어서 비순차적인 접근을 통해 데이터의 종류에 관계없이 저장, 관리가 편리한 하이퍼미디어 응용이 크게 활용되고 있다. 따라서 본 논문에서는 하이퍼미디어 응용 구축에 적용될 수 있는 패턴들을 식별하고 응용을 구성하는 객체와 이들 간의 관련성을 네비게이션이 가능한 노드와 링크로의 재구조화를 지원하기 위한 자사용 요소로서 설계 패턴을 제공하는 프레임워크를 제시함으로써 프레임 워크 및 생성 응용의 아키택쳐에서 패턴 재사용을 통한 생산성을 향상하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.227-230
• /
• 2009

This paper presents an architecture of various devices convergence for ubiquitous network. Integration of a variety of devices be can connect to every kind of device should not be constrained. We construct PLC to UPnP protocol architecture and UPnP Bridge Module for interconnecting Non-IP devices with heterogeneous network interfaces to UPnP devices on UPnP networks.

• Journal of KIISE:Software and Applications
• /
• v.32 no.12
• /
• pp.1205-1216
• /
• 2005

Component-based Development (CBD) is gaining popularity as an effective reuse technology. Especially commercial-off-the-shelf (COTS) components are mainly for inter-organizational reuse, rather than intra-organizational reuse. One of the essential tasks in CBD is to reuse the right components that provide the functionality and interface required by component consumers. If candidate components provide a limited applicability and customizability, a component consumer cannot reuse the components in application development. To resolve this partial matching problem, we need smart connectors that fill the gap between candidate components and the specification of components required. Previous researches about smart connector describe only connector types to resolve mismatch problems. However, previous researches do not address the identification and design method to resolve the problems. In this paper, we suggest taxonomy of various mismatch problems to identify partial match problems between requirements of the application and components. We identify smart connector types and suggest a systematic process for designing smart connectors using the taxonomy. Therefore, components that have the problems can be used to develop applications.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.21-21
• /
• 2003

경골어류의 뇌하수체에서는 두 종류의 생식선자극호르몬 (FSH, LH)이 생산되며, 이 호르몬들은 공통적인 α 쇄와 특이적인 β 쇄를 가진다. 연어과 어종들에서, FSH는 난황형성과 정자형성의 역할을 하며, LH는 배우자의 최종성숙을 조절한다. 냉수성 고유어종인 열목어 (Brachymystax lenok)의 멸종을 방지하고 종묘생산을 원활히 하기 위하여 먼저 열목어의 GTHα, FSHβ 및 LHβ 쇄를 cloning하여 염기서열을 결정하였다. 열목어 GTHα, FSHβ 및 LHβ의 cDNA는 산천어의 해당 cDNA와 높은 상동성 (각각 84, 95, 98%)을 보였다. 다음으로 기능적인 생식선자극호르몬을 제작하기 위해서 2개의 쇄를 single-strand로 연결하여 진핵세포를 숙주로하는 시스템에서 생식선자극호르몬을 생산할 수 있는 구조체인 FSHβ-GTHα (235 amino acids) 와 LHβ-GTHα (240 amino acids)를 각각 재조합하였다. 또한 각각의 융합단백질 생산용 구조체의 3'-말단에는 단백질추출이 용이하도록 histidine×6 구조를 첨가하였다. 이상의 단일쇄 FSH와 LH 유전자재조합 산물을 포유동물 유래의 세포 (CHO-K1)에 liposome chemical을 사용하여 유전자도입 후 세포에서 분비되는 단백질을 모니터링하였다. 배지를 부분정제한 후 SDS-PACE로 조사한 결과, LH 재조합 유전자를 도입한 후 48-60 시간째에 약 25 kDa의 단백질로서 관찰되었다. 현재 FSH 재조합 유전자에 대해서도 조사중이며, 향후 이를 재료로 하여 기능형 생식선자극호르몬을 생산하고 추출하기 위한 연구가 계속적으로 수행 될 것이다.